Storage of biomass is associated with problems like heat development, biomasslosses, and reduction of the fuel quality. Certain processes such as biological- andchemical degradation are responsible for these storage problems. This master?sthesis was carried out at Vattenfall Research and Development AB and is alignedtowards quantifying the Biomass losses from short-term storage (1-2 months) ofbark and recovered wood. The biomass was stored in outdoor piles during differentseasons, campaign 1 (summer) and campaign 2 (autumn).

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

Hemp is an annual energy crop that fits very well in Swedish crop rotations. It is an interesting crop with many benefits, for example its ability to establish a large quantity of biomass in one year. Hemp is easy to grow and out-competes unwanted weeds through its aggressive growth pattern without the need for pesticides. Interest in growing hemp and other energy crops is currently decreasing, apparently because of high grain prices. These high prices give a higher net profit that we believe could partly cover the cost of hemp cultivation, while the hemp in turn would improve the crop rotation and thus repay its debts in the form of increased yields of other crops. The great disadvantage of hemp is the lack of knowledge about spring harvest of the crop.

During consultation procedures between forest owners and the Sámi, data on, e.g., reindeer lichen biomass on the current site is needed. Hitherto, the existing methods of measuring lichen cover and biomass has been either objective methods such as the Point Intercept method, which is time consuming, or some sort of subjective visual estimation, which is faster but less accurate. However, both these methods are sensitive to different observers and/or to different inventories. This paper addresses the further development and evaluation of a photographical inventory method that uses colour distribution in images to estimate lichen biomass. During the autumn of 2011 six different locations, with different grazing pressure and lichen cover, in Norrbotten county were inventoried using both the Point Intercept method and the photographical method, complemented with collection of biomass samples.

An important process for grid companies in order to reduce power losses in electricity distribution grids is to figure out where and how they appear. This report describes the factors that cause power losses in low voltage distribution grids and methods for how they could be measured and analyzed. Measurement data for consumed and injected energy were collected for twelve low voltage distribution grids owned by Gävle Energi AB in order to analyze the size of the power losses and how the measurement uncertainty affects the collected data. Then models of three of the grids were created in MATLAB in order to analyze the data and the power losses were calculated to be compared to the collected data. Curve fitting were also used as a method in order to analyze the power losses from collected data.The results show that the losses in the studied grids are low.

Game fields are one way to divert animals away from sensitive areas, create shelter and forage, and also to increase the biological diversity. In this study I investigated how the plant composition in six different crop mixes used for game fields affected the biomass production, biomass consumption and biological diversity at the Koberg estate in southwestern Sweden. Six experimental fields were used and each field contained six plots, approximately 1500 m2 each, that was sown with a different crop mix. The crop mixes ranged from a pure grass mix (A), 70 % grass and 30 % leguminous plants (B), 53 % grass, 21 % leguminous plants and 26 % other herbs (C), 100 % leguminous plants (D) to the most complex mixes constituting of 91 % leguminous plants and 9 % other herbs (E) and 87 % leguminous plants and 13 % other herbs (F). The fields were cut weekly during the summer in 2010, to estimate weekly biomass production.

Ungulates are causing conflicts between stakeholders due to browsing damage on forests and agricultural crops. At the same time there is a big demand of keeping high ungulate densities for sports hunting and recreational purposes. Movement patterns of ungulates are strongly correlated with forage availability. Therefore, measures affecting forage quantity and distribution might be a tool to reduce the economical losses in forestry without decreasing the ungulate densities and thereby decrease the conflict between different interest groups.This study investigated the potential biomass production and utilisation of marrow-stem kale (Brassica oleracea var. medullosa), at game fields in Misterhult, Sweden, as well as browsing effects on adjacent forests.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

When harvesteing ley there is always mechanical losses from the harvest machines. During the last years the roundbalers with knives,cutting the material-are more common, This use increase the mechanical losses of material. MATERIALS AND METHODS The roundbaler which used in this test was a Krone Vario Pack 1500 Multi Cut. This roundbaler has 17 knives. The theoretical length of cut was 64 mm. During the test we stretched a rubber tarp under the balechamber and collected the materials which fell down from the balechamber.

Energy losses are an essential part of a power grid company?s costs. From anenvironmental and economic perspective, it is important to reduce these costs. Toknow where efforts should be deployed, it is important to have good knowledge ofwhere in the network losses are situated. When creating network tariffs, there is alsonecessary to have a correct distribution such that the network customers that use acertain part of the network, only pays for the network losses in this area.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.

An increasing demand for wood products in China has resulted in large areas invested in fast-growing tree plantations of eucalyptus. Eucalyptus plantations are often associated with an intensive management including fertilization. By understanding the effects of fertilization and where in the ecosystem nutrients are accumulated a more sustainable forest management could be achieved. In this study, a nutrient budget including all biomass and soil components was created for Eucalyptus urophylla. The examined nutrients were nitrogen, phosphorus and potassium.

In Sweden the climate makes it impossible to feed fresh herbage to cattle during many months of the year. During periods when preserved forage must be supplied it is important that this forage is stored in such a way that high quality is retained, both nutritionally and hygienically. Furthermore, it is essential that losses occurring when handling and storing the forage are kept as low as possible. This study compares storage in tower silos, bunker silos, big bags and bales,estimating dry matter losses as well as losses in metabolizable energy and crude protein that occur during storage. The results show that tower silos, bunker silos and big bags, the systems with the largest amount of forage and a long feed out period involve larger losses than bales, which are fed out immediately after being opened. As the feed out rate influences the losses, tower silos and bunker silos should be used during the period of the year when the feed out rate is as high as possible, i.e.