Due to soft grounds in combination with seasonal variation in soil humidity, there is a lack of stands that are possible to cut during spring and autumn in some geographical regions. For Holmen Skog this sometimes means that a large proportion of the contracted private forest is cut during the winter when the ground is frozen. One consequence of this is that the proportion of winter stands in the stand bank of own forest increases while spring and autumn stands becomes a scarcity. This in combination with milder winters, especially when there is a long period of reduced bearing capacity in spring or autumn, means that the situation rapidly can become critical. The overall goal with this study was to generate basic data for decision support in the work to achieve a sustainable distribution between own forest and contracted private forest in the stand bank. The study took place at Holmen Skog, district of Umeå, during autumn 2007 and was based on interviews and an analysis of harvest planning and delivery data. The study showed that there is a problem with how the cutting is distributed between own and contracted private forest during the year and that it foremost is the proportion of winter thinning of own forest that has increased in the stand bank.

Chewing behaviour includes both eating and ruminating activity. Chewing behaviour is of great importance for the feed intake as through the action of chewing (i.e. eating and ruminating) animals mechanically process the forages in small particle sizes and prepare the food for digestion. As cattle grow the chewing behaviour changes along with increasing body weight and chewing efficiency is increased. The aim of this thesis was to review the available scientific literature in order to describe chewing behaviour in growing cattle, as well as the factors that affect this behaviour.

Today cultivation of cereal in Sweden has high costs for establishment in relation to the rest of the world, and if this cultivation will be able to continue, the farmers have to control their costs. It is important to see all costs, not the maximum harvest achieved, but the net result. All farmers have different conditions with respect to soil, direction of the farm and were the farm is located geographically. With the right knowledge and ambitions, we think most farmers could change to reduced tillage. In this paper we have tried to find out if reduced tillage is an alternative for farmers.

I have through a case study looked on a milkingfarm in Dalarna and been counting on what it would cost to increase the silagestorage. Today they have to little capacity on the existing towersilo because they built a bigger farm with more cows. The reason is that two families decided to start having the production on one farm together and moved all animals from one of the farms to the other farm. So for that reason I have looked on the costs to build a new towersilo or levelsilo. The goal has been not only to look at the buildingcost but also which operatingcost that is included with the different alternatives. I have taken tenders from two different towersilocompany, Bjurenwall and Svenska Neuero and taken tenders from Abetong for a levelsilo with roof and one without roof. The overall feed requirements on the farm is on 240 tonnes dry extract and the old towersilo hold 110 tonnes dry extract so the need for a new foundation is on 130 tonnes dry extract. I have through cost estimate been counting on the specific buildingcost for each buildingaltenative.

Wermland was affected by the Spanish flu like the Swedish national average, about a half percentage of Wermlands population would lose their lives to the flu during the autumn 1918. The flu has for many fallen into oblivion. This oblivion is so wide spread that it´s possible to talk about a "collective forgetfulness". The society have selected to remember 1918 for "when the guns went quiet on the western front" and not for the millions who died from the treacherous Spanish flu. The world had already suffered enough from the four years of war that had been fought, thus the victims of the flu would be honored but would soon fade in to oblivion.  When you investigate deeper you get the picture that the national average don´t do Wermland and its cities or rural areas any justice when a large variations seems to occur within regional areas.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

The aim for the study was to examine a harwarder´s (combined harvester-forwarder) productivity when harvesting forest fuel in first thinning stands that contains Lodgepole pine and calculate the economy of the harvesting work and estimate the quality of the thinning . The field study area where located near Arvån, about 15 kilometres south ?east from the city of Lycksele. The field studies were taken place in three different stands. All tree stands had the same tree age, but the tree species combination and the density varied.

We have been looking at three different types of agriculture in Södermanland, in the middle east of Sweden. We call the different types for Intensive, Extensive and Mix. The purpose is to get an economic defensible plan for how to run different farm sizes. We also have been looking at the working hours and how many hours the different types will give. We have a farm called Taxinge Gods as our pilot farm. Taxinge Gods grow 407 ha land and is located 60 km southwest from Stockholm.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

This report is of technical character and treats how to plan a small building in Borlänge, Sweden.The technical components that have been treated in the report are the construction, foundation,installations and thermic abilities of the house. In addition to planning this house the report alsocontains a part that deepens in net zero energy buildings. The purpose of the report is toinvestigate if the house in Borlänge can be constructed to meet net zero energy buildingdemands.Energy efficient houses such as passive- and net zero energy houses are showing more frequenton the market in Sweden. Ongoing climate changes and growing consciousness about theenvironment in society have contributed to that the environment is a well discussed topic. Toconsume small amounts of energy and at the same time produce local energy is thereforesomething that lies in the future and future houses.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

The aim of this paper was to explain protein degradation in silage and protein quality and biogenic amines in silage and their effects on the health of the dairy cows. After harvest-ing, the plant proteases degrade the proteins in the plant. The protein degrades to different fractions with different digestibilites in the rumen. Fraction A contains non- protein nitro-gen which is peptides, free amino acids and amines. True protein is in the fraction B and is further divided into three subfractions depending on their solubility.

Corn is an important food and feed crop in the world, in Sweden it?s up till now grown on limited acreages mainly for silage. But I think it can get more important if you can grow it also for grain, because it?s a good animal feed for example, for life stock-, pigsand poultry. On of corns advantage is that it can produce the same amount of dry matter as for example wheat, barley and rise but with 25% less water. I will examine if it possible to grow corn for grain production in the south of Sweden.