This Master Thesis covers the concept of Green Cars. The background to the research area is the high and rapidly growing number of cars, which together with other factors ad to the pollution of the environment. Under the Kyoto agreement the signing members agreed to lower the emissions of green house gases, further on the EU has a 3-pillar strategy on carbon dioxide and cars. Included in the EU strategy is a voluntary commitment from the car industry to reduce carbon dioxide emissions from new cars. The easiest way of lowering the emissions is by using alternative fuels and engines.

In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

Syftet med detta examensarbete är att göra en investeringsbedömning av en anläggning för kombinerad produktion av biogas och biodiesel åt lantbruksföretaget Lindhs Djur & Natur AB. Utgångspunkt är det koncept för kombinerad produktion av biogas och biodiesel på gårdsnivå som Ageratec AB utvecklat. Konceptet utgår från att glycerolfasen som bildas vid biodieselproduktion är ett värdefullt substrat vid biogasproduktion. Scandinavian Biogas Fuel AB har därför på uppdrag från Ageratec AB utvecklat och optimerat en biogasprocess för samrötning av glycerol och gödsel.För att kunna göra en relevant investeringsbedömning så granskas investeringen både ur ett ekonomisk och miljömässigt perspektiv. Den ekonomiska analysen består av en investeringskalkyl för två olika amorteringstider där teorier för nuvärdesanalys tillämpas.

Vatten a?r en fo?rutsa?ttning fo?r allt liv, men det a?r inte bara vatten som kra?vs, utan a?ven att vattnet a?r rent och ga?r att dricka. Det finns goda tillga?ngar till vatten pa? va?r jord, men bara en bra?kdel av detta vatten a?r av tillra?ckligt god kvalite? fo?r att det ska kunna drickas. Idag saknar fler a?n 700 miljoner ma?nniskor i va?rlden tillga?ng till tja?nligt dricksvatten.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

In this thesis a method for evaluating investments in small scale hydro power is presented. An analysis of the future position that small scale hydro production will have on the Nordic electricity market is also carried out. This is done by an inventory of technology and economic and environmental aspects. The inventory is also a guide as to how the project should be implemented.Hydrolyzer is the name of the Excel tool developed to evaluate investments. The tool requests input data from the user and then evaluates the investment and generates a sensitivity analysis.

This thesis is the final part of bachelors program of Nuclear Engineering at UppsalaUniversity (program code KKI1). The work has been carried out in cooperation withForsmark Kraftgrupp AB. The topic studied deals with possible improvements ofefficiency at the planning department at block 2 in Forsmark i.e. FMP2.FMP2 plans and coordinates over 3,000 operations which is carried out during theannual overhaul of block 2 in Forsmark. Inspections, fuel replacement and repairs areincluded in the annual overhaul.

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.

The automotive market is currently undergoing a historical change where stricter emission legislations and ever increasing fuel costs have intensified the search for effective alternatives to the conventional internal combustion engine, which has resulted in a substantial trend towards electrification of powertrains. Storage of electrical energy is the fundamental component in this technology where the lithium-ion batteries are currently considered as the most appropriate solution. Lithium-ion batteries, however, as other types of batteries, can only be used efficiently and durably within a specific temperature range.This Master thesis has been carried out in collaboration with Electroengine in Sweden AB, situated in Uppsala, which has an ongoing project regarding development of a modular battery system for electric powertrains. The project is at a stage where an initial prototype has been developed which provides the foundation for this thesis. The study has addressed the battery system performance from a thermal perspective, in order to validate the ability of the system to create a thermally serviceable environment for the lithium-ion battery cells.

Syftet med denna studie har varit att undersöka de multinationella företagens ?tvingande joint venture-avtal? med de kinesiska tillverkarna, och hur det påverkar teknologisk överföring. Som metod för att samla in information valde uppsatsförfattaren att genomföra kvalitativa intervjuer, vilka var semi-strukturerade. Genom ett icke-sannolikhetsurval valdes tre företag ut för att delta i studien.Studiens slutsatser tyder på förutsatt att den kinesiska regeringens krav på joint venture-avtal reviderades eller helt slopades och de multinationella fordonstillverkarna därmed fick valfri möjlighet till FDI, då skulle det leda till att färre företag ingår joint ventures med kinesiska tillverkare. Dessutom ökar incitamenten för de multinationella företagen att överföra teknologier till den kinesiska fordonsindustrin om de har möjligheten att fritt bestämma FDI, däremot är det ingen garanti för mer effektiva teknologier.

Approximately 60 million cubic meters of round wood are transported every year with trucks in Sweden and stand for 15 % of all truck transportation in the country. The big amount that is transported results in many haulage companies works in different parts of the country with different conditions to get a good flow on their transports. Today the transport pricing is very general and the payment consists of the unit round wood they are transporting and the distance of the transport. The purpose of this study were, from the freighter and the haulage company?s perspective, try to find ways to change the today applied transport pricing to more differentiated and compare them to historic payment of transportation.

Fjärrvärmebranschen i Sverige har sedan mitten av 1990-talet varit i en stagnationsfas, där mängden producerad och förbrukad energi i stort sett varit konstant, trots stora investeringar i fjärrvärmenätet. Samtidigt har den höga andelen återvinning gjort att det råder brist på avfallsbränsle till energiåtervinning i Sverige. I kombination med hög konkurrens om avfallsbränslet har detta medfört att aktörerna på marknaden tvingats se sig om efter nya vägar att tillfredsställa behovet av bränsle, vilket lett till att det idag importeras stora mängder avfall för energiåtervinning från utlandet. Vid Vattenfalls fjärrvärmeverk i Uppsala har det mellan åren 2006-2013 återvunnits i snitt drygt 360 000 ton avfall per år. En stor del av detta hämtas in från lokala kunder, både kommuner och privata aktörer, men man har på senare tid även behövt börja importera avfall för att tillfredsställa energibehovet.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

The crucial factor for successful municipal climate work is that there are driving forces. Most importantly is that the senior officials and politicians in the municipality are dedicated to the cause considering that they have the power to influence and make a change. Besides proactive and committed individuals, it is necessary that the work is organized and anchored by clear and concrete documents and control systems. It is also important that the work is continuously monitored and evaluated. To collaborate with other municipalities, authorities or participate in various networks is another factor contributing to the improved climate work in the form of exchange of information, knowledge and experience.A major driving force for municipalities to improve themselves is the distribution of state aid and grants.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.