Couch grass (Elymus repens (L.) Gould) is a severe weed in Sweden, and since both the use of herbicides and cultivation should be decreased, it will become increasingly problematic to control couch. The present work is meant to, by literature studies and an experiment, give some answers to the question if cutting and competition can depress the growth of couch. The experiment was carried out in the growing season 2001 at Ultuna, Uppsala, in plastic boxes. The design was three-factorial randomised complete blocks. The factors were plant combination, nitrogen level and cutting strategy.

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

Want to help making the world a better place? Do it with HypOCycle!HypOCycle is a bachelor thesis that started in September 2007. The project is owned byLars-Johan Hjertz and Erik Westerlund.HypOCycle is probably the only bike in the world that has a linear pedal movement. Themovement comes from a new engine technique that hasn?t even been brought to themarket yet.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

Organic agriculture is financially promoted in Sweden by special environmental support and as consumers we are all encouraged to buy organic food. At the same time scholars at the Swedish University of Agricultural Sciences claim that organic farming does not provide any environmental benefits. The main criticism is that organic farming has lower yields than conventional, which means that more land is needed to produce the same amount of food as in conventional farming, leading to deforestation and loss of biodiversity. As for climate change, the critics claim that the significantly higher productivity in conventional crop production compared to organic, releases surplus land, which could be used for bio-fuel production and thereby replace the fossil fuels. The critics also claim that organic farming causes higher nutrient leaching than conventional.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

Analyses of pollen and charcoal in peat cores, together with age-structure data of Pinus sylvestris from a Ledum-Pinus-mire in the Tyresta National Park (south-east Sweden) show the regional vegetation succession and fire history over the last 9000 years. Five major stages of mire development are identified: 1. Lake (c 7000-6400 cal BC); 2. Wet fen (c 6400-6000 cal BC); 3. Deciduous fen (c 6000 cal BC to c cal AD 700); 4.

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

Vaccination of fish can be assumed to cause pain. This study was designed to see if we can minimize the suffering of fish following vaccination. Fishes are cold-blooded animals and thus more primitive than warm-blooded animals. Despite this, many organs, e.g. the nervous system, have the same basic structure as that of other vertebrates. The fibre system for conducting pain is more diffuse than in humans.

The energy sector is facing an impending paradigm shift. Today?s technology enables the end-user to generate their own energy locally at home. Furthermore, recently developed storage technologies make it possible to balance energy demand with stored energy and integrate district heating with the local power grid. This means that in the future heat and electric power will interact and energy flows is converted over energy boundaries.

Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.

The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

The demand for food, feed, fibre and fuel has increased in Uganda over the past 50 years due to population growth. Recurring extreme climate events such as drought and flooding, in combination with large-scale land degradation, have led to declining crop yields. Lack of equipment, money and socio-economic issues has contributed to low yields. However, the soils in Uganda have the potential to produce much higher yields than they do today. This study, which was carried out in April-June 2013 in Kkingo District, south-east Uganda, examined the effects of agroforestry on yield of cooking bananas in small-holder farming systems. Six farms practising agroforestry and six farms with no agroforestry, which were chosen in cooperation with the NGO Vi Agroforestry, were compared.