A uniform environmental rating system for green buildings is demanded in today's society, where the requirements of the energy consumption for real estate are increasing. There are several different systems around the world used to rate buildings, all with different assessment criteria and starting points, which make it difficult to compare environmental rated buildings with each other.The purpose of this paper is to acquire knowledge about the differences between the Swedish environmental rating system Miljöklassad Byggnad and the American LEED, to discover which system is most advantageous. We also examine whether environmental rating affect the value of a property.Miljöklassad Byggnad is relatively simple structured, which makes it possible for private individuals to rate their property. LEED is better structured on the other hand in the case of environmental classification of commercial properties, because there are manuals for among others hospitals, schools and retail. The rating system for Miljöklassad Byggnad is good since the system seeks to fix the number of errors and deficiencies as soon as possible.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

The work covered in this report includes a literature study of the diesel dual fuel technology(hereinafter referred to as DDF). The literature study covers earlier work that has been doneregarding the use of compressed natural gas (CNG) and diesel in a DDF system. Moreover a onecylinder research diesel engine was fitted with a CNG fuel system for experimental testing. Theinstallation of the engine and the test cell is described. Results from the tests are presentedcovering emissions, heat release and pressure traces from the DDF-concept.During the literature study it was found that most research was related to heavy duty dieselengines.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

Conjunctival swabs from 12 cats in a Swedish animal shelter were analyzed by real-time PCR for FHV-1, Mycoplasma felis and chlamydiae. The purpose of this study was to see whether and to what extent these agents can be detected and if they were detected from cats housed in quarantine or in the adoption department. Samples were first taken upon arrival at the quarantine and then a second sample was taken two weeks after moving to the adoption department, or upon presentation of signs of disease. The cats spent the quarantine period in two separate quarantines: five in a new quarantine (quarantine A) and seven in a room in the old shelter (quarantine B). The difference between these quarantines was that in B the cats were often mixed together ant the hygiene routines were not as good as in quarantine A.

The Swedish Animal Welfare Act say that all milking cows must have access to pasture in summer time. That was a gift to Astrid Lindgren o her 80th birthday from the Swedish Government. Sweden is a predecessor in animal welfare, but how well do we live up to these big expectations? In this thesis I will examine how well the pasture for milking cows works. I have been interviewing farmers with milking cows and people in the business. I have also been searching information on Internet, and using the library of Alnarp. Cows that are kept on pasture are exposed to different kind of parasites, but on the other hand they run a smaller risk to getting acetonemi, pareses and udder infection. Veterinary Pierre Nordmark means that cows on pasture are more healthy then cows kept inside all summer.

In December 2008 the municipal council in Nybro, decided that the municipality shouldreduce the budget for food service. The budget should be reduced by 2 100 000 SEK.They decided that the children- and education committee, and the care committee would haveto lower their budget with 1 264 000 SEK respectively 636 000 SEK. The change have to bedone under two years, 60 % should be done under 2009 and 40 % under 2010.As a result of the decision, many kitchens have to become kitchens that only serve food, notcook it. This will result in preschool staff and nursing staff take over some of the tasks fromthe kitchen staff. The municipal council also decided that entrepreneurs could take over one(later two) cooking areas.A kitchen that serves food means that there isn?t any cooking involved.

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

In order to reduce greenhouse gas emissions from human activities fossil fuels will have to be replaced with renewable energy alternatives, such as bioenergy. Sweden has a great potential to produce bioenergy derived from forest products and there is currently a great interest within Sweden in using stumps for bioenergy production. However, the environmental consequences of the method need to be investigated before stump removal can be performed on a large scale. Swedish forest soils contain large carbon pools and a different land use may change conditions so that soils that presently act as sinks of carbon could potentially turn into sources of carbon release instead. This study investigates the initial effects of stump harvesting on the emissions of three greenhouse gases, carbon dioxide, methane and nitrous oxide. The emissions were measured from the soil surface in a Norway spruce forest located in the southern part of Sweden.

The aim of this study is to examine ways of writing experiences of the strange and different, experiences of the other in his or her otherness and experiences of suffering. The study focuses possibilities and limits for the writing of these experiences and aims at finding a tangible way of writing literature. Part of the aim of this study is to elaborate a proposal for a way of writing experiences of the strange and different, experiences of the other in his or her otherness and experiences of suffering.    The material for the study consists of three different approaches to literature, in which theories on literature or analyses of literary works are presented. This material is initially analysed in separate analyses in which conceptions, strategies and methods for writing experiences of the strange and different, the other and suffering are identified. Secondly, the material is analysed in a comparative analysis, aimed at finding similarities and differences between the approaches but above all to let the approaches supplement and challenge each other.

This is a study of some risk factors for Diabetes Mellitus (DM) in dogs. As a pilot study it is meant to give information to be used in a planned later, larger and better controlled study. The present study hypothesized that suboptimal feeding (high percentage of homemade and table foods), lack of activity and overweight contribute to the risk of DM. Twenty consecutive dogs diagnosed with DM at the Veterinary University Clinic in Uppsala between 2000 ? 2003 were chosen as the experimental group.

Syftet med den här uppsatsen var att belysa hur ledningen i bemanningsföretag ger stöd till anställda genom feedback. Uppsatsen börjar med att vi tydliggör ett praktiskt problem som är vanligt förekommande inom bemanningsföretag. Vi illustrerar detta problem med en figur som åskådliggör en distans mellan bemanningsföretagen och dess anställda. Den här distansen kan emellertid leda till bristfällig kommunikation mellan parterna och för att minska sannolikheten att detta uppstår, kan ledaren i ett företag stödja de anställda genom att ge feedback. I teorikapitlet utgår vi från en modell som visar de faktorer som bör beaktas, det vill säga 360-gradersfeedback, coachning, uppmuntran till dialog, självkontroll samt lärande organisation.

In order to produce grain in an economically rational manner numerous decisions have to be made. One of these decisions is what tillage system to use. The cost of the tillage system is a large part of the total cost in grain production. Different tillage systems result in different distribution of fixed costs, operating costs and timeliness costs. The price of the produced grain and cost of inputs also affect the best way to produce grain.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..