Sök:

Sökresultat:

1378 Uppsatser om Biologic reduce - Sida 62 av 92

Solenergi : en lönsam investering för ett lantbruk?

A possible way to reduce pollution and slow down the process of global warming is to increase the usage of renewable energy sources. One of these renewable energy sources is solar power. With the aid of solar panels and solar cells the energy from the sun can be transformed into both heating and electricity. The requirement to use the sun in this fashion is a suitable surface, for example a big roof, an angle between 40-60 degrees and that the surface should be exposed to the south. Almost every farm meets these requirements.

Produktivitetsförbättringar : - förhöjning av produktiviteten vid mekanisk verkstad genom förkortade transportsträckor och standardiserad bearbetning

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Effekt på mark och gröda av olika bearbetningssystem, med och utan CTF

Swedish agriculture has gone through big changes in the latest 60 years. The farm sizes have increased, which has led to raised tractor and machinery sizes and therefore increasing problems with soil compaction. A method to reduce these problems is to implement controlled traffic farming, CTF. All field operations are then concentrated to specific tracks by using GPS guidance. The aim of this work was to study how the tillage regime, with or without CTF, affects the soil, with the main focus on macroporosity. In Säby close to Uppsala, and Alnarp close to Malmö, randomized block trials has been carried out, and the data has mainly been taken from these trials.

Foraging and anti-predation behavior of Thomson?s gazelles (Gazella thomsoni) and Grant?s gazelles (Gazella granti) at a waterhole

Prey species make behavioral decisions to reduce the perceived risk of predation and the time spent vulnerable to predation. Behavioral responses to predators are for example selection of specific habitat types and the presence of predators influence individual vigilance. Furthermore, there is a variation in feeding niches with different herbivores focusing their foraging effort on different vegetation types which is also expected to affect the choice of habitat. Behavioral data on anti-predation and foraging behavior at on waterhole is collected from Thomson?s and Grant?s gazelles at Ol Pejeta Conservancy (0°00?N, 36°56?E) located in semiarid bushed grassland in Laikipia district of central Kenya.

Hantering av kugghjul : -Vägen från mjukbearbetning till hårdbearbetning

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

EFFEKTIVISERING AV INTERN MATERIALHANTERING

Considering that the current technology is constantly improving, it becomes increasingly important to have an efficient logistics in a company to maintain profitability while achieving a competitive business. Efficient logistics may be accomplished by improving the internal materials handling. In this thesis the internal material handling of steel frames has been studied at a factory in Vaggeryd. The goal of this study is to investigate the problems that exist with the current production flow of products and provide suggestions on how it can be developed to reduce unnecessary handling and movement.The study has a deductive approach where the authors has been using literature studies parallel with empirical analyzes conducted at a company to achieve the purpose of the study. Documentation from the company and interviews with staff and observations form the basis for the data collection carried out.

Det ligger i luften - en enkät undersökning om kvalitetssäkring av ventilation på oprationssalen

ABSTRACTIntroduction: Postoperative wound infection is the third most common nosocomial infection in Sweden. The ever-growing problem of antibiotic resistance provides surgical departments a big challenge when it comes to preventing the spread of infection. Operating theatre nurses have a vital role in the prevention of infection. In addition, correct ventilation in the operating theatre is of great importance. The caregiver is responsible for quality assurance of ventilation in the operating theatre, but the work can be delegated to other staff within the department.

UTFACKNINGSVÄGGAR : En jämförelse mellan platsbyggda och prefabriceradebyggmetoder

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

Arboga Mekaniska Verkstad : Förslag på saneringsåtgärder gällande gjuteriet och plåtverkstaden

The industrialization in Sweden has increased the large number of areas that have been contaminated with various types of pollution. One of those sites are the property Höjen 3:24 in Arboga where ?Arboga Mekaniska Verkstad? once been. The property wants to increase the use of the old former foundry building with the adjacent ?plate-workshop? and believe there are two options for the building: That the building either should be used as a warehouse/concert hall, or rebuilt into a cultural center. An environmental evaluation has shown that the levels of heavy metals are over the Swedish environmental protection agency guidelines of less sensitive land.

Översvämningsrisker längs Funboån

Flooding events are no longer rare, floods occur all over the world. Accordingly, it is vital for the society and different authorities to work with flood mapping. To meet the goal of Uppsala kommun to map the risks of floods in Uppsala län, a map of the different areas around Funboån which are inside the area of risk for flooding have been developed.In the work, cross sections and the water flow have been measured. Moreover, an echo-sounding have been carried out in Funboån to map the bottom topography. From the bottom map and laser scanned data covering the study area, a terrain model was created.

Klotter och skadegörelse : metoder och tekniker som förebygger klotter och skadegörelse i offentliga miljöer

The city?s public environments are meant to be perceived as safe and inviting areas to visit any time of the day. In recent decades the number of vandalism complaints has doubled and graffiti has become so common that it received a separate category in the crime statistics. With this type of impacts in the public environments the experience are precarious and a boring sight. It?s difficult to put a price tag on these types of crimes, the number of unreported cases suspected to be large.

Avskaffande av revisionsplikten : En komparativ studie

The purpose of the set of regulations as regards to accounting and auditing within the Union, is primarily to ensure a high quality of the large public companies financial reporting and hence protect the capital market investors. As the set of regulations also applies to the small companies, these are burdened by administrative costs that are disproportionate. To increase the competitiveness of the European companies, the European council has stated that it is essential to reduce the companies? administrative costs. The main principle is that all companies are under an obligation to statutory audit, however Member States may make audit exemptions for small companies.

Anabola Androgena Steroider & Identiteter

There is little knowledge about abuse of anabolic androgenic steroids (AAS) in Sweden. Thispaper aims to explore, from a discourse psychological angle, how persons with experience ofanabolic androgenic steroids (AAS) construct there identities.The theory and method used as a frame for the paper is discursive psychology, depending on thefocus in the paper of human beings use of language in the construction of identities. Forcollection of data interviews were made. The six respondents al had experience of use of AAS.The interviews illustrated how users of AAS speak about AAS, and create there identity, inrelation to AAS. In the interpretation of data we used two different tools, used by discursivepsychologists, interpretative repertoires and subject positions.

Factors affecting bark-stripping by red deer (Cervus elaphus) : the importance of landscape structure and forage availability

Bark-stripping by red deer (Cervus elaphus) cause extensive damage to economically valuable spruce trees (Picea abies) in Swedish forests. The underlying causes for bark-stripping are not fully understood, and the frequency and severity of damage unpredictably differ between regions. In this study, I investigated if landscape structure (e.g. agricultural dominated landscape opposed to forest dominated landscape), forage availability, population density and disturbance (e.g. roads and settlements) affect bark-stripping frequency.

Markskador vid GROT-uttag : en enkätstudie hos skogstjänstemän

Forestry is increasing on an industrial scale where collection of logging residues takes a greater part. This has resulted in more machinery and heavy machinery driving in the clear felled area, this increases the risk of soil damage that will occur in the form of soil compacting and rutting in the clearings. This affecting on the nature in a negative way and especially in rivers and lakes that are affected by siltation and acidification leading to increased levels of heavy metals and methyl mercury. The purpose of this study was to investigate why there is damage to the ground when working with the slash in forest management from the forest officer point of view. A self-designed questionnaire was used and 45 questionnaires were sent out to various companies all over Sweden.

<- Föregående sida 62 Nästa sida ->