Introduction: Dental health globally is not equally distributed as shown by caries prevalence is higher in areas with more immigration outside Scandinavia and Western Europe and areas with lower socioeconomic status. To reduce the health inequalities in Borås, a dental health project was made in five kindergartens in the district Hässleholmen. Purpose: The purpose of the survey was, by interviews with the actors involved (teachers, children, parents and the public dental service) find out the views of the project, and whether the project is relevant and should continue. Method: The method used was qualitative interviews with the actors involved in dental health project. A total of 21 interviews were then consolidated by a qualitative content analysis.

BackgroundWorld Alliance for Patient Safety, launched by the WHO, has created a Surgical Safety Checklist. It was first published in 2008 and has been translated and modified in Sweden by Landstingens Ömsesidiga Försäkringsbolag, LÖF. The use of the WHO Surgical Safety Checklist has been shown to reduce the number of complications and deaths related to surgery.AimThe aim of this study is to describe the Theatre Nurse?s participation in in the use of a modified version of the WHO Surgical Safety Checklist intraoperatively in two Theatres in a hospital in the centre of Sweden.MethodThis study has a quantitative descriptive approach. A direct observational study was carried out in two Theatres and the participants were asked a few complementary questions after the observations.

The purpose of this report is to investigate the possibilities with drain water heat recovery (DWHR) in residential buildings. Information and relevant theory has been collected and summarized in this report. Calculations have been done for given scenarios to evaluate profits. DWHR heat exchangers use simple technology and have long life-time. The heat exchanger is connected to outgoing drainage pipe and incoming cold-water supply so countercurrent flow is accomplished.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

Background:Chronic heart failure (CHF) is a complex clinical condition. The higher survival rate after heart attack and other heart diseases, plus aging population, has led to more CHF patients. Symptoms can have negative impact on exercise capacity, ability to perform activities of daily living and quality of life. Heart failure clinics have been established to help better quality of life. Helping to stabilize and maintain patients´ health can reduce the need of hospital admission.

Regulations on the exhaust emissions of HD-diesel engines are becoming more and more stringent, and therefore, emission after-treatment systems are commonly used. These systems rely on catalytic conversion of NOx,CO , and HC emissions, and are thus dependant on temperature. At low load of the engine, exhaust temperatures are not sufficient for the after-treatment components. Therefore, means to increase the exhaust temperature while maintaining low emissions and fuel consumption are needed.The focus of this project has been to develop strategies for the lift profiles of exhaust and intake valves in the engine, with the goal to raise exhaust temperature in combination with low emissions and fuel consumption. The strategies have been tested in a single-cylinder research engine equipped with a hydraulic variable valve actuation system.

Titel: Value stream mapping in practice ? A case study at Light MyFireAuthors: David Rydman and Tomas ÖnnemarMentor: Veronica Ülgen SvenssonExaminer: Åsa GustafssonBackground: Companies push their prices in today's markets to be competitive, which means that companies need to find ways to reduce costs while maintaining profits. (Cudney, 2009) According to Bergman and Klefsjö 2007, the basic rule of quality improvement says "there is always a way to achieve higher quality at a lower cost". One way is to improve a company's processes to get a more efficient flow and improvements that may cut costs. (Bergman & Klefsjö, 2007) Why it's important to look at the processes are that they often contain waste that can be eliminated.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.

Author: Nina Ekberg and Therese LjungTitle - Within the social services approach: A qualitative interview study of the social services attitudes towards young offendersSupervisor: Melker LaboryAssessor: Ulf DruggeThe purpose of this study was to see the social workers attitude towards young offenders and how this can affect the teenagers. The theoretical perspectives have been the theory of street-Level Bureaucracy, social constructivism and Stages of change. The material has been collected through qualitative semi-structured interviews and email-interviews with the social workers. The aim of this study was to examine if the social workers uses their theoretical experiences about their attitudes in their practical work and if their response can raise or reduce the young offenders motivation to change their behaviour. To collect information it was chosen that this study would only concentrate on the social workers opinions.

Swedish goats are mainly held for cheese production and therefore, both milk quality and composition are of great importance for dairymen. Today, only few data exists on milk composition from Swedish dairy goats and the casein content is still unknown. One way to reduce the work load for goat farmers and increase animal welfare can be to keep goats and kids together for longer periods. The aims of this study were to investigate how milk yield and composition were affected when kids suckled their dams during 8 weeks, and to measure the casein content on farm level by a mid-infrared spectroscopy method, previously calibrated for goat milk. Lactating goats were kept in two different MIX- systems where the dams are both suckled and milked.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

The Swedish CFC rules imply a taxation of Swedish partners of foreign legal persons subject to low income tax, which is based on a fictitious distribution. Thus, tax is levied even if the dividend has not been paid to the shareholder. The aim of the Swedish CFC legislation, which was put into force in 1990, was to prevent tax evasion and to protect the Swedish tax base. The reason was that the foreign exchange control was abolished, which made investments in foreign countries possible for Swedish companies. A CFC legislation was considered necessary for Sweden in order not to lose tax revenues.The legislation was strengthened on January 1st 2004 as a consequence of the abolished taxation of capital income of commercial shares.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.