Sök:

Sökresultat:

1378 Uppsatser om Biologic reduce - Sida 5 av 92

Värmeförluster vid utvändigt placerade ventilationssystem

To be able to handle tomorrows need for limited energy consumption we need to reduce our use of energy. The building sector stands for around 40 % of all energy consumption in the society. The government has put up a goal to reduce the energy consumption in our buildings with 20 % by year 2020 and 50 % by year 2050 compared with year 1995. To be able to do reach that goal we need a more energy efficient building stock.The main part of the energy used in our buildings is used for space heating. By installing ventilation systems with heat recovery on the exhaust air it is possible to use the heat-energy in the exhaust air to warm up the incoming air.

Immunisering för att minska ornelukt

Hundreds of thousands of piglets are castrated without anesthesia in Sweden every year so that we may be guaranteed meat without boar odor. The smell appears while cooking meat of boar and is described as urine- and sweat-like. High levels of androstenone and skatole are considered the main factors behind boar odor. Skatole is a metabolite of the amino acid tryptophan, which is formed in the colon of all pigs. Androstenone is a steroid hormone that is released from the Leydig cells in the testes of boars.

Reducering av ledtid genom en värdeflödesanalys En fallstudie på Lammhults Möbel AB

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Viktstudie av Analysinstrument : Konceptförslag för minskning av vikt

This thesis report describes the development of concepts regarding how weight can be reduced to the analytical instrument Biacore 4000. This thesis has resulted in five different concept proposals, all of which is solutions to reduce the instrument's weight.The thesis started with a pre-study where the instrument's structure and function were studied using both Solid Works, the opportunity to study the instrument in real life were also possible done. During this phase, a weight study was conducted as well, in which the instrument's weight distribution was studied and mapped.Following the initial phase, the work proceeded by developing concrete concepts to reduce the weight of the instrument where focus mainly was on the two cabinets. In addition, another two concepts were revealed, both with a more general approach.At the final phase of the thesis, the concepts were compiled and evaluated among themselves and the initial instrument.The thesis resulted in a study of the instrument's structure and weight distribution, with suggestions on how weight may be reduced for the instrument.The result factors such as materials, and manufacturing were aspects that were taken into consideration.At the final section of the report, suggestions for further work in which different aspects are discussed can be found..

Analytisk dimensionering av räddningstjänst : fördjupad analys av insatsförmåga och täckningsgrad inom Räddningstjänsten Syd

In order to reduce the number of casualties and injured from accidents the rescue service must become more efficient and flexible. It is noted that far more people is injured and killed in traffic accidents than from fires. During the daytime the number of accidents in about three times higher than during the night, even so today the number of fire fighters on duty is the same day and night.Two computer models for simulation of different locations of the rescue services are used to determine the best options for placement of the rescue services. A cost-benefit analysis is also used to determine if today's fire stations are efficient for the society from an economical point of view.The results of the different models are that the fire station in Lund is misplaced. The number of ladders in Malmö can be reduced.

Effektivare ytterbelysning inom Karlstads Bostads AB :  

This report is an inventory of the street lighting in half of the residential estates owned by Karlstad Bostads AB, a public housing company. The inventory was made to reduce the environmental impact of the street lighting. From the inventory an estimation of the total installed power and the energy consumption was made. The total estimated power of the street lighting was 125 kW and the energy consumption was 500 000 kWh/year with an estimated running time of 4 000 h/year. The dominating source of light was 125 W discharge mercury lamps.

Jordtäckta hus : Energiberäkningar och kostnadskalkyler på ett jordtäckt hus i Malmö

With rising energy prices and the threat of climate change, energy costs and energy savings havebecome a central and important part in building. Therefore it is interesting to explore different andnon-conventional methods of energy conservation. Building Earth sheltered houses is such a method.Earth provides good insulation and provides the ability to both reduce the total heating needs and toreduce the maximum power demand. The aim of this study was to construct a house in Malmö and seeif Earth sheltered houses can be a cost effective alternative for the construction of sustainable andenergy-efficient houses.Previous studies have shown that Earth sheltered houses have reduced their power requirement with upto 25% and their use of energy with 10%. Numerical calculations in Comsol Multiphysic 4.2, wasperformed on a house with different degrees of earth covering.

Fel i produktionen : En studie om uppkomna fel i två anläggningsprojekt

AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.

Bullerreduktion av hytt på Volvodumprar : Undersökning, mätning och analys

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

Är egenföretagande en riskfaktor för alkoholmissbruk?: en studie om egenföretagande och dess villkor kan vara riskfaktorer för alkoholmissbruk

The aim of this essay was to obtain an understanding about company owners thinking about the connection between having an own company, and the risks for an alcoholic abuse. The risk factor I was researching was stress, alcoholic culture, accessibility and rehabilitation.I have interviewed five owners of small companies, two women and three men, which represents four different kinds of branches. The theories I used in analysing the empirical findings where the theories of psychosocial work environment of Lazarus, Karaseks demand/control model, epidemiology- and culture perspective.I have found that the main stress factors for company owners where the economical stress and great load of work. The stress was also related to the fact that company owners of small companies often were alone with all the responsibility and problems.Women did not use alcohol very often as a tool to reduce stress. If individuals were using alcohol to reduce their stress, it also had to deal with their ability of coping and also what channels they had for coping..

7 LEDARE I FASTIGHETSMÄKLARBRANSCHENS SYN PÅ, OCH HANTERING AV, FASTIGHETSMÄKLARES GRÄNSLÖSA ARBETSFÖRHÅLLANDEN.

The purpose of this study was to get an idea of ??how the leaders in the real estate industry perceive and manage boundless working conditions. Questions that were answered were how the leaders in the service influence and control the employees' working conditions. Also how the communication strategies are designed to facilitate the work towards common goals, when tasks are not limited to the workplace. The study examine if boundless working conditions is characterized by unspoken expectations.

ARBETSMILJÖ OCH OLYCKOR I BYGGBRANSCHEN

The construction industry accounted for 19 % of all work-related fatalities in Sweden between 2010 and 2013. The exam report has been done to find out what underlying causes there are to the high number of fatalities and to the occupational statistics of the construction industry. Moreover it has been reviewed what improvements can be done to reduce accidents and fatalities in the construction industry. The report consists of a survey of statistics, laws and regulations affecting the work environment and of literature concerning the subject. It has been conducted an interview and a questionnaire survey at the construction company Asplunds Bygg and an interview with an inspector from the Work Environment Authority.

Järnberikning av mjöl : exemplifierat med Egypten och Iran

The purpose of this study is to give an overview about iron fortification from the view of technique and health. Example of a technical aspect is different iron compounds which are used for fortification like ferrous sulfate, ferrous fumarate and elemental iron. In the aspect of health the big question is if iron fortification can improve the health in reducing the prevalence of anemia. The study focuses on flour fortification with iron in Egypt and Iran and involves a literature study with scientific articles. Also information from WHO (World Health Organization), FAO (Food and Agriculture Organization) and FFI (Flour Fortification Initiative) are used.Fortification means an intentionally increasing of the content of micronutrient in foods with the aim to improve the food quality and deliver a nutritional benefit to the consumer.

Vegetation och ljudmiljö

Landscape architecture is a visual profession, but other senses also affect our interpretation of a place. Sounds can give us a lot of information about an environment, and they are often perceived as positive. Despite this, research about outdoor sounds most often focus on the reduction of unwanted sounds ? noise ? but the absence of noise does not result in a good soundscape. To accomplish this, sounds we appreciate are needed.

Fra?n passivhus till NNE-hus : va?gen till ha?llbar utveckling

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

<- Föregående sida 5 Nästa sida ->