The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

Det är mycket viktigt att förhindra att bekämpningsmedelsubstanser läcker ut i miljön och orsakar skada. Lagstiftningen kräver därför att läckaget av bekämpningsmedel från odlad mark minskas. Olika myndigheter och organisationer har olika ansvarsområden beträffande bekämpningsmedel. Bekämpningsmedelssubstanser kan, om de inte hanteras rätt, vara skadliga och därför finns det tydliga bestämmelser om hur dessa substanser ska hanteras. Många oberoende undersökningar visar tydligt på att det förekommer läckage av bekämpningsmedel i samband med att de används i behandlingar av odlad mark. Undersökningar har pågått under lång tid både i Sverige och i andra länder. Ett flertal åtgärder och metoder mot läckage av bekämpningsmedel från odlad mark har framtagits och utvecklats som radikalt kan minska läckaget av bekämpningsmedel.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

AbstractOutsourcing is a business strategy that has developed over the last 40 years. Outsourcing means to let another company do some activity within the company, for example production.The thesis for this paper is: How is outsourcing used in a manufacturing company today and how is the resource efficiency affected by it? The research is divided into two parts, a theoretical part and an empirical part. The theoretical part consists of a study of literature. The works in this study is books, text books, bachelor thesis paper and scientific articles.

The purpose of this study was to illustrate the effects of music in pre-, peri-, and postoperative care. This study is a systematic literature study based on 22 scientific articles with quantitative methods. Music is an alternative treatment used in nursing care. Nurses could as a complement to routine pre-, peri-, and postoperative nursing have music interventions in mind, because an operation involves anxiety, fear and pain for many patients. The result of the study shows that music can reduce patients? anxiety, pain and improving their wellbeing and recovery.

The swedish healthcare is in many situations one of the best in the world. But still, the healthcare system includes elemnts that reduce the efficiency. Partly becouse the swedish healthcare is largely monopolized, the servicecs are not properly prized and the economic responsibility and the liability legislation is limited. The main problem this study evolves around, is how a different liability rule would change the shape of the healthcare organisation. Abouve all, how would the approach to riskmanagement and preventive and riskreducing performance change with a diffrent liability rule.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

Energy issues are constantly increasing attention in today's society. People's impact on Earth isentered in more contexts. Many discussions are about how the entire social structure needs to bestreamlined in order to achieve sustainability. The residential and service sector accounts for 39 % oftoday's total energy consumption in Sweden and the increasing electricity prices have made buyersmore interested in energy issues.There are many buildings in need of refurbishment today, including all the apartments that werebuilt in the 1970s to reduce the housing shortage at the time. 650 000 apartments of one millionapartments were built during the so-called the one million program and is currently in need ofrefurbishment.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

The purpose of this study is to investigate whether a so-called "expectation gap" exist between the accounting consultants and their clients. The excistence of an expectation gap has already been confirmed between auditors and their clients. Interviews were conducted with both accounting consultants and managers to find out what expectations they have for each other. The factors that influence the occurrence of an expectation gap and the size of them are many but the most important factor may be regarded as individuals' different needs and requirements. The gap can be reduced or entirely eliminated by ensuring the quality of an accounting consultant's work, for example, REKO and / or that management have more realistic demands that actually can be met.

The research in this paper aims to producing a home version machine thatcan dry and make biological waste into compact pellets. This product ismade primarily for those who want to improve the environment and reducethe energy consuming process of separating the biological leftovers fromother waste in the large processing plants and save money due to reducedpickups of waste. Since there is no commercially available product thatdoes what we want to achieve we had to start from the beginning with boththe design and the mechanical aspects. The result is a machine, that fits inour homes, and in an easy and inexpensive way reduces the amount ofbiological waste that needs to be collected by the public wastetransportation system. This is done without reducing any of the energy inthe waste and it can still be used to compost or by large-scale plants that usethe waste to make electricity.

In fisheries, there is a long tradition to use catch data when evaluating changes in the stock and effects from harvesting. It is a common practice to use Catch Per Unit Effort (CPUE) as an index of population size, and several studies have investigated the properties of CPUE in relation to population abundance, spatial distribution and efficiency of gear. In research, catch rate on trap-transects is used as an index of abundance for wildlife species but CPUE is rarely applied as a tool in harvest management.In 1993, more than 60 000 km2 of the state managed mountain range in Sweden was opened to the public for small game hunting, under the responsibility of the county administrative boards in Jämtland, Västerbotten and Norrbotten. The total area is now divided into 332 hunting units (median=73 km2) and an internet based system is used to administer licences and reporting bag statistic. Each hunter has to register the results within two weeks after the hunt.

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.