This thesis investigates how recipient countries' domestic type of democracy affects its inclusive ownership in international development cooperation. This is done by examining Swedish development cooperation with Rwanda and Tanzania during the period from 2010 to 2014, a time when ownership - a concept which emphasizes recipient countries' leadership over its own development - was a central part of the international development agenda. The two cases were selected through a most similar case design where the value of potential explanatory variables was similar, except for the recipient countries' types of democracy. Furthermore, the case study uses a comparative analysis to analyze strategies and reports done by SIDA and the Swedish Ministry of Foreign Affairs. Previous research focuses on the exclusion that national ownership can result in, in undemocratic national contexts. The main argument for this should be seen as the fact that ownership can not be representative if the power of the recipient's development agenda is limited to a decision-making elite.

Aquatic organisms are usually not exposed to single substances but rather to mixtures of toxicants in streams located in agricultural areas. The transport of pesticides used in the agricultural area in Sweden is monitored with continuous environmental supervision every year. During 2002-2008 an average of 10 pesticides were found in each sample and 40% of the samples contained substances with concentrations higher than the Water Quality Standards. Chemical risk management is normally based on single-test evaluations. A problem when assessing mixture toxicities is that the constituents and concentrations of pollutants in the environment vary greatly.

AbstractA prerequisite to be able to use semi-natural pastures in an optimal way is knowledge about their conditions and properties. One thing to consider is the amount of herbage mass that can be produced during one season on different types of semi-natural pastures. That knowledge makes it easier to choose which type of animals and how many you are able to have in each paddock to maintain a high biodiversity and achieve the desired production of the animals at the same time.This study was performed in nine different semi-natural pastures around Uppsala. The paddocks were already mapped with regard to different vegetation types. Exclosure cages were placed on previously fertilized, mesic, dry, shaded and wet vegetation.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

Robotic milking in Automatic Milking systems (AMS) is proposed to reduce manual labour and at the same time increase milk yield by increasing milking frequency. In order to increase milking frequency, it is essential to have well-functioning cow traffic. Investing in an AMS is a great capital investment for the farmer, thus it is of major importance to ensure maximal AMS capacity. This study investigated the effect of the traffic systems Feed First? and Free cow traffic with and without waiting area (WA) on cow performance and AMS capacity.

I take interest in whether and how students in primary schools nowadays in Sweden participate in book clubs. My focus is on why teachers and school librarians choose to run book clubs and try to understand the structures that make book clubs possible. The method form my work is the qualitative research interview. I interviewed a group of eight people, five school librarians and three teachers from a medium-sized city in southern Sweden. My theoretical framework is a model contructed by researcher Patricia Montiel-Overall called Teacher- and Librarian Collaboration.

Almost every company sooner or later ends up in a more or less difficult economical situation. The reason for the economical crisis varies for each individual case but common for them all is that it is the management group that has failed in their work to guide the organisation to avoid a negative result. The next common denominator is that it is the management group that has to handle the changes in the company's environment and lead the company out of the crisis. But how can they do this and take decisions in a rational and effective way and is there warnings signals that the management group missed before the crisis was a fact? This is some of the questions that this study is going to discuss and analyze. The aim of the study is from a management perspective chart the strategic work of the company's management work when handling an economical crisis.

This thesis examines the legal boundaries of third-party use of trademarks in the European customized clothing market. The purpose is to determine under what circumstances third parties may legally modify and sell trademarked apparel without infringing on trademark rights. The study employs a legal dogmatic method, analyzing EU trademark law, case law, and legal doctrine to clarify the scope of exclusive rights and their limitations. By analyzing key EU case law, the study further illustrates how the legal framework has been interpreted and applied in cases concerning third-party trademark use. Given the increasing demand for customized fashion and the rise of new business models in the clothing industry, this topic holds significant legal and economic relevance. Additionally, Schumpeter?s theory of creative destruction provides a theoretical perspective on how trademark restrictions impact innovation and market competition.

This essay will focus on the significance of gender in toys´ portrayed in children books for the age 3-5years. The aim for the essay, partly, is to highlight how gender stereotypes can come forth and affect children through the way toys are illustrated within children?s books. The essay will address books from two different time periods, the first period being the 40-50- 60's and the other being the 00´s. The questions to be addressed in this essay is; what type of toys? children play with in the books used in the analysis, and if a change can be detected between the different time periods in terms of gender awareness in what type of toys are presented in the books.The main method used in this essay is an iconological image analysis in which the first step is mapping, other methods used is analysis and interpretation.

Chiari type I malformation is a condition in humans characterized by a small posterior cranial fossa, downward herniation of the cerebellar tonsils, foramen magnum overcrowding and disturbances of cerebrospinal fluid dynamics. Syringohydromyelia is often seen in patients with Chiari type I malformation. Syringohydromyelia is characterized by fluid-filled cavities in the spinal cord. This causes damage to the nervous tissue in the spinal cord. In recent years, a condition similar to Chiari type I malformation has been recognized in dogs. It has mostly been seen in Cavalier King Charles spaniels (CKCS). The condition seen in dogs is usually called occipital bone hypoplasia. The aim of the study was to examine whether there is a difference in the shape of the caudal fossa between CKCS, small bred dogs with a similar head shape and dogs with a normal head shape and if occipital bone hypoplasia is related to a head shape with a steep back of the head. Other aims of the study were to examine the crowding of nervous tissue in the foramen magnum in each breed group, the extent of syringohydromyelia and to what extent the malformation had caused neurological signs. Sculls from dogs on autopsy were divided in halves and the position of the cerebellum compared to the level of the foramen magnum was studied.

In Sweden plans to build high speed railways have been around since the early 1990s and the planshave developed to be more precised since. The future Swedish high-speed rail network is supposedto consist of two lines. Götalandsbanan; from Stockholm to Gothenburg, and Europabanan fromJönköping through the Öresund Region to Hamburg.The description of the aim to build high-speed railways in Sweden has in former reports always beento achieve rapid passenger traffic between big Scandinavian cities and Europe. There are almostnothing mentioned about the possibilities of high-speed transports of cargo on these railways. Thisstudy aims to clarify the freight transport market for Götalandsbanan and Europabanan.Today there is only one transport system with high-speed freight trains.

Background: Infectious Diseases Institute points out that the potential of various viraldiseases possibly can block each other. It is said that the virus that causes common cold,Rhinovirus, may have saved many people from the flu. If this assumption proves true, itwould explain why some viral diseases in some countries have been slow to take off and pointto a new way to struggle influenza. Objective: The main purpose of this study, based onreported cases of RSV and influenza type A, type B and H1N1, investigate whether viraldiseases can block each other, i.e. difficult season of flu may delay and / or mitigate thespread of RSV in Sweden.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.