The purpose of this report is to compile and examine the cost of renovation of moisture-damaged Bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in Bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of Bathrooms. The average price is the basis for the estimate of future renovation costs of Bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

This report deals with prefabricated Bathrooms and the advantage, during the production process, they have compared to ordinary produced Bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the Bathrooms and its importance as sanitary and wellbeing.The recent problems with damage caused by damp in Bathrooms. Have resultade in regulations.

Tile covered Bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedBathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

Tile covered Bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedBathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, Bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for Bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

Buildings today are built to maintain a healthy indoor environment and an efficient energy usage which is probably why damages caused by dampness has increased since the 1960?s.A study between year 2008 and 2010 showed that 26 percent of the 110 000 examined houses had damages and flaws caused by dampness that could prove to be harmful later on. This means that one out of four Bathrooms risk the chance to develop damages by dampness. Approximately 2 percent of the houses had already developed water damages. It is here where the problems appear.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike Bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

An energy study has been performed on two blocks in an area called Gävle Strand. The buildings are owned by a tenant-owner?s association called brf Carolina and were built by the company Skanska 2008. The builder as well as brf Carolina are pussled by the fact that electricity use is higher than expected while heating is less. Skanska is also very interested in finding out how much heat recovery from stale exhaust air through a geo-thermal heat pump is contributing to the general heating requirement and energy balance in four out of the ten buildings located on the properties.To find possible answers to the higher electricity use a literature survey on user behaviour was conducted.

An energy study has been performed on two blocks in an area called Gävle Strand. The buildings are owned by a tenant-owner?s association called brf Carolina and were built by the company Skanska 2008. The builder as well as brf Carolina are pussled by the fact that electricity use is higher than expected while heating is less. Skanska is also very interested in finding out how much heat recovery from stale exhaust air through a geo-thermal heat pump is contributing to the general heating requirement and energy balance in four out of the ten buildings located on the properties.To find possible answers to the higher electricity use a literature survey on user behaviour was conducted.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include Bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.

There was a silence surrounding homosexuality in the People's Republic of Poland. One can almost get the impression that same sex love, and same sex relationships, did not even exist there; that the communists had successfully removed homosexuality from society. The roots of this silence can be found in the Communist Party´s disdain for anything deemed individualist and deviant, and also in the conservatism and religiosity of the Polish society.In my thesis I study when and how gays and lesbians found a way out of the silence that surrounded their sexuality. Gay men did so by creating subcultures, which found refuge in parks, public Bathrooms and a few bars in larger Polish cities, and offered a sense of belonging for them. Lesbians, on the other hand, lacked this access to semi-public spheres, which made it even harder for them to find each other and create a space for their sexuality.