This is the final documentation of the basis that can be the foundation of how to solve theproblem with leaking hydraulic oil in a shoe press at the company Albany InternationalAB in Halmstad, Sweden.The project has been performed at Halmstad University as a degree project commissionedby Albany International AB. The purpose of the degree project was to find a way ofdetecting the hydraulic leak of a shoe press. The reason is that the shoe press runsunattended during nights and weekends, this can cause an extensive decontaminationwork and production stop if leak. The hydraulic oil could be leaking in large amounts orslowly as a fine mist. The development of a working system that can detect a hydraulicoil leak and stop the machine before a large amount of hydraulic oil leaks out wouldconsiderably reduce the cost of the decontamination work.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

AimThe purpose of this study is to compare the level of activity between playing wii Sports Tennis and wii Sports boxing, and the usual sports, and to see how the two variants are perceived.Issues:- How much strain ratio and energy consumption it gives to exercise wii sports compared with the playing of sport for real?- How do the test participants experience the different tests?- How are the two wii sports games against each other in terms of activity and fitness in the school environment?MethodThis is an experimental study in which 10 test participants (5 men and 5 women) have carried out four different physical tests. The tests consisted of either playing an exergame or playing a sport for 25 minutes. Physical activity was measured during the test using a heart rate monitor. All test participants completed all tests in the same order.

Sydkraft Vattenkraft AB owns and operates the Traryd hydropower plant, located in the river Lagan in the southern part of Sweden. The gravity dam is classed according to RIDAS guidelines (Hydropower Industry Dam Safety Guidelines) as a class 1B dam. This means that the dam must discharge a class 1-flow which has a return period of 10 000 years. The inflow into the dam has been calculated in an earlier report to 495 m3/s, with a waterline at an elevation of 126, 3 meters above sea level. The gravity dam has a discharge system with two rectangular weirs, which results in a smaller discharge than the necessary 495 m3/s.

Eutrophication is an environmental problem that affects more than ten percent of Swedish lakes. Excess nutrients increase the growth of algae, and cause major problems in the ecosystem through oxygen-free bottoms, fish kills, and at worst dead bottoms. Agriculture accounts for 44% of human emissions of phosphorus to lakes and rivers. Leaching occurs of particle bound phosphorus and of dissolved phosphate. The amount of phosphate in the soil solution that may be leached is partly due to the prevailing pH in the soil solution. The purpose of this study was to investigate how the relationship between phosphate solubility and pH was affected by liming.

The capacity to process and to remember information is a basic condition for language ability and for coming reading ability. Reading ability is strongly connected to phonological awareness, receptive vocabulary knowledge and working memory capacity. In what way hearing impairment in children affects development of cognitive skills and later on reading ability is an area that has attracted minor attention for research.The aim with this study was to investigate changes in cognitive skills and reading ability in children with mild or moderate hearing impairment after one year of progress and furthermore if any connections between any increases of the abilities were to be found. Comparisons were made with results from age adequate normal hearing children. Moreover prosodic ability on word-level was tested this year.

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The aim of this study was to find possible relations between behaviour and physiology for puppies during different parts of a puppy test. This work deals mainly with the physiological part of the study. Thirtysix puppies, från five litters, were tested in a behaviour test where heart rate was measured and saliva samples were collected before and after each part in the test. Saliva and urine samples were analyzed for corisol concentration as an indicatior of stress. The tests were performed during two consecutive days in the breeders' home when the puppies were seven weeks old. In addition, heart rate and cortisol levels were also measured in the bitch since we were interested in finding out if there were any relations between physiological levels in bitches and puppies.

Purpose: The purposes of the current study were to investigate whether there were any differences in the perceptual ability between professional and non-professional ice-hockey players and whether professional players are better at distinguishing, paying attention to and concentrating on what is important during intense physical activity. Method: Twenty male ice-hockey players (10 from both the Swedish first and third divisions) participated in the study. Wingate test were used for physiological measurements while three psychological tests were presented in front of the participants. Stroop, Flanker and Fast counting tests were used to measure perceptual and coping abilities during intense physical activity and the differences between the two groups. Results: Fast counting and Flanker word 2 tests showed a significant difference between the two groups, whereby the professional groups was faster and more accurate than the non-professional group in answering.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

The main topic of this thesis is to evaluate the impact on the usability of web pages when using responsive web design, a concept for developing web pages whose design adapts to the screen size being used. This is done by creating a responsive prototype based on an existing web site. A number of usability tests are conducted on the two versions of the site in order to compare the time to complete the tests and to observe the behaviour of the test participants. The tests are conducted on desktop as well as on mobile devices with varying screen size.The number of test participants was relatively low, and so the quantitative result is not statistically valid. However, the conclusion is that the most effective combination is to use either of the sites on desktop format.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.