Piled friction soil show a set-up which is increasing with the time after installation. The cost could be reduced if the set-up had been taken into account when designing but in Sweden it is very unusual to do that. Previous studies showed that set-up can vary between 25 % and 75 % during the first 90 days after pile installation. This showed that the effect of the phenomenon is difficult to predict. A study involving five projects have been carried out by specifying certain parameters like pile type, method for pile installation and test method for measure the bearing capacity in friction soils located in Sweden.

This study aims to evaluate the value relevance of Piotroski?s (2000) nine fundamental signals. In order to do this, the signals are tested on the OMX Nordic Exchange Stockholm between the years 2003 and 2009. The hypotheses of the study are whether the signals are value relevant and if the value relevance has changed. To test this, a Chi-square test and a regression are used.

Transformation of inorganic mercury (Hg) to methyl mercury (MeHg) is a biotic process that is proposed to be conducted primarily by sulphate reducing bacteria (SRB). The formation of MeHg is of great interest because it is the mercury species that biomagnifies to the greatest extent in the aquatic food webs; about 90 % of all Hg in fish is MeHg. Our understanding of factors involved in the production of MeHg is very important for making a reliable risk assessment. The purposes of this study were to investigate the different factors that control the solubility of Hg and the production of MeHg in a contaminated lake sediment. The lake Ala-Lombolo, Kiruna municipality, is well-known to be contaminated by mercury from different sources. Sediment cores were sampled at three different locations (N, SW and SE) in the lake and divided in three different layers; 0-5, 5-10 and 10-15 cm.

This report is a qualitative study on children aged three to five years who are in the Swedish preschool. The purpose of the study is to investigate how five experienced preschool teachers view the way children between three and five years acquire basic mathematical concepts, basic numeracy and geometry. The aim is also to find out whether teachers feel that the size of the group of children affects their learning.The study contains information about what preschool teachers think about the way children learn mathematics and how the size of the group of children affects this learning. From the results it can be seen that children learn Mathematics, both in everyday situations and when playing. Moreover, the group size does not seem to affect the mathematical learning of the child.

ABSTRACT Epilepsy describes a neurologically caused condition which involves seizures. Epilepsy can be classified according to different types of causes and the nature of seizures can vary. Medication for epilepsy in dogs is limited in comparison with human medicine. Idiopathic epilepsy is the most common neurological disease and one of the most common genetic diseases in dogs. Because epilepsy has a higher prevalence in certain breeds, there is reason to suspect that it is a hereditary disease. The inheritance of idiopathic epilepsy is for most breeds not determined, except for a few variants of the disease.

Undersökningens huvudsakliga syfte är att ta reda på hur elever uppfattar experiment och laborationer inom ämnet fysik. Ett annat syfte är att kartlägga elevuppfattningar om grupparbetet inom det laborativt arbete som kan ha betydelse för elevens aktivitetsgrad och lärande. Som grund för detta examensarbete har vi använt oss av en kvantitativ enkätundersökning som genomförts på 250 elever i grundskolans senare årskurser och gymnasieelever som läser natur eller teknikprogrammet. Resultatet av undersökningen visar att eleverna tycker att det är intresseväckande med laborationer, de ser till viss del kopplingar mellan deras vardag och fysikundervisning och de tycker att de lär sig mer genom att laborera. Dessa uppfattningar stämmer väl med vad didaktisk forskning anser vara syften med laborationer..

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

The purpose of this report is to evaluate different methods for identifying states in robot models. Both linear and non-linear filters exist among these methods and are compared to each other. Advantages, disadvantages and problems that can occur during tuning and running are presented. Additional measurements from accelerometers are added and their use with above mentioned methods for state estimation is evaluated. The evaluation of methods in this report is mainly based on simulations in Matlab, even though some experiments have been performed on laboratory equipment.The conclusion indicates that simple non-linear models with few states can be more accurately estimated with a Kalman filter than with an extended Kalman filter, as long as only linear measurements are used.

The purpouse of this study is to find out how and if a Content Managment System (CMS) can benefit from applied User Experience Design (UX). A work project has been executed where a client wanted the students to create a user friendly CMS for adding content to a global hotel review site. A prototype of a CMS was created based on literature studies about UX and CMS. The prototype of the user friendly CMS was then tested through user tests and interviews with key users. After input from the key users the prototype was changed until the users were satisfied with it..

In latter years there has been a discussion about the increasing importance of intangible assets and how to incorporate this fact into strategies, accounting and valuation. The ?Internet-bubble? is a recent event that drew much attention to intangible assets, and was an indicator of how complex it can be to value assets in general and intangible information in particular. Legislators recently addressed this issue by introducing IFRS3, which led to an update of IAS38, which in turn revised the methods for handling intangible assets. A specific intangible asset that has caused much debate is research and development (R&D), since it is commonly not allowed to be realized as an asset, which could cause implications concerning analysis and valuation.

AbstractThe knowledge about pesticide residue in private wells is not well documented in Sweden.Previous studies have detected pesticide residue in private wells, this issue is what made themunicipality of Laholm commission the study. The purpose was to collect water samples from50 private wells in Laholm and have them analyzed for traces of pesticides. The wells in thestudy are spread geographical over the entire municipality. The analysis of the water sampleswas carried out by the accredited laboratory Eurofins. Nine of the 50 wells in this studycontained residue of pesticides and two of these exceeded the allowed concentration of 0,1 ?g/l.Nine different pesticides were detected, among these were BAM, Atrazin and breakdownproducts from Metribuzin.

Hypertrophic cardiomyopathy (HCM) is the most commonly diagnosed cardiac disease in cats. The phenotype varies from mild focal thickening to severe concentric hypertrophy at the left ventricle. Two separate myosin binding protein C (MYBPC3) mutations have been identified in Maine coon cats (A31P and A74T) and one in Ragdoll cats. All three of them seem to cause familial HCM in an autosomal dominant pattern. The purpose of this study was to investigate the presence of these three mutations in population cats of different breeds with HCM in Sweden. The results may show if HCM is present in the absence of these mutations.

The automotive industry is increasingly studying lightweight solution in their designs, also rational production and low costs in materials and manufacturing methods are of great interest. This thesis consisted in the practical evaluation of anchors for sandwich panels. The object was to study loads of shearing and pull out of the plane. The experiments were carried out on panels made up of 1mm aluminium coatings and 50mm extruded polystyrene (XPS) at its core. As the fasteners used simple methods such as blind rivets, screw and glue.

This thesis discusses the possibilities to distribute digital video in a military vehicle. Today, an analogue system is used, which has a maximum capacity of eighteen video sources and the same number of monitors. The purpose of this thesis is to increase the systems capabilities regarding secure distribution and additional functions. Both software and hardware tests are made to investigate the features of the digital video standard MPEG-2. Both the coding delay and the image quality are of great interest.