Utgångspunkten för examensarbetet var att med ett arkitektoniskt förslag kommentera urbaniseringens effekter för små orter på landsbygden. Första fasen i projektet bestod av en bred analys av orten Arvidsjaur. Den andra fasen bestod i att forma förslaget. Förslaget blev en innovation baserad på en sammansmältning av följande kvaliteter i Arvidsjaur:- Försvarsmaktens vinterenhet och fjälljägare- Biltestningsindustrin- Ökande naturturism- Bra serviceutbud- Exotisk natur och klimat- God infrastrukturPå grund av att fler människor numer bor i storstäder har intresset för turistresor till den orörda naturen ökat. Den starkast växande gruppen är personer som både vill ut i naturen och samtidigt ha närhet till god service och bekvämlighet.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.

Harmonics are a well-known problem that has to be dealt with in the design of thegenerator. Internationally accepted standards limits the amount of harmonics allowedin the no-load voltage. These limits can be difficult to fulfill with integral slot winding,where the number of slots per pole and phase is an integer. The presence of thedamper winding often makes the problem with harmonics even worse and harmonicswith frequencies of order 6q±1 arise with significant amplitude. How the damperwinding is designed affect the content of harmonics in the no-load voltage and the aimwith these ? has been to investigate in which extent design of the damper windingaffects the contents of harmonics.Simulations with the 2-D finite element method have showed that if the damper barsis centered in the pole shoe, the amplitude of the harmonics of order 6q±1dependsboth on the ratio between the stator slot pitch and damper bars slot pitch and if thedamper bars are connected between the poles or not.If the damper bars is displaced with ¼ stator slot pitch alternately, the amplitude ofthe harmonics of order 6q±1 is reduced and the influence of the ratio between thestator slot pitch and the damper bars slot pitch will vanish.

Uppsalahem is the leading housing corporation in Uppsala with its over 160 real estate properties. Uppsalahem is owned by the municipality of Uppsala, which has a climate and energy goal that aims for 100 MW of solar energy to be installed in Uppsala by 2030. The 100 MW goal, combined with Uppsalahem?s environmental policy, is a strong incentive to investigate the possibility of installing PV modules on the many available roof areas that Uppsalahem possesses. The objective of this thesis is to create a foundation for future decisions regarding PV systems for Uppsalahem.

ABSTRACTBackground: Children and adolescents growing up in families where parents have serious problems are exposed to an increased risk of developing poor mental or physical health themselves. In a support group work they can meet other children in the same situation, receive help and support to process their emotions and manage their everyday life.Aim: To investigate if support group work at Trappan can reduce the psychological problems load and increase the experience of life quality, hopefulness and optimism in children and adolescents growing up in families where either addiction or mental illness occur in one of the parents. The purpose was also to investigate if there was any difference between these both child groups regarding psychological problems load, experience of life quality, hopefulness and optimism before and after support group participation.Method: Questionnaire study on children and adolescents of parents with addiction or mental illness. The children participated in support group work at Trappan. The measuring?s were conducted before and after support group participation.Results: In both groups an increased life quality in connection to finished support group participation was observed.

The calf extrator?s function has been studied, through measuring traction and how this varies in different situations, in comparison with corresponding manual traction situations. This was done against the background that excessive force at assisted calvings at dystocia can mean life threatening damages on the calf such as grave acidosis, vertebral fractures, femur fractures and rib fractures. The calf extractor has earlier been measured to pull with greater force than the established maximum force of ?two strong men?.

The aim of this study was to examine the current and historic mercury(Hg) load of the lake Storjuktan due to its recent exposure to a local potential source of Hg in form of the Sulphide mine Blaikengruvan(2006) and an earlier potential sources of Hg-load, the damming of the lake(1960s). Sediments were extracted using a HTH-sampler, freeze-dried, and analyzed for tot-Hg, LOI and activity of 210Pb and compared to samples extracted prior to the opening of the mine(2006). Constant initial concentration (CIC)-dating model was used for dating the samples. Low levels of Hg (100ng/g) were found throughout the lakes sediment. The highest levels of Hg(220ng/g) was detected at a depth of 4-5cm dating back to the mid 1970:s, suggesting that increased levels of atmospheric Hg rather than damming of the lake has caused the increase of Hg.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

Background: Today many companies are competing to get space in our minds. Companies spend a tremendous amount of money on building strong brands. It is not just about making us aware of their logo, today it?s more about giving the brand a ?soul? and to load it with different values. Due to today?s globalization there is also interesting to look at it from a cultural perspective.

The aim of this Master's thesis is to study how DIK (Documentation, Information and Culture), the major trade union for Swedish librarians, work with the status and professionalization of the occupation. The status is, as we see it, low and depending on several factors. They are among others: the knowledge base, how extended the research base is and the domination of women within the profession. These factors all work together to maintain the status and the prestige of the occupation at a low level. With the help and work of the trade union DIK the status can improve if the focus is right.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

As a consequence of increasing wind power installations in the Nordic grid the last years, the need for regulating power has become larger. In the Nordic grid, regulating power is mainly provided by hydro power. One part of the regulating power is called frequency control, which ensures that the grid frequency is stable and close to 50 Hz.However, setting the turbine into frequency controlled operation may cause stress and wear of the components in the mechanical control system. Frequency controlling implies large and frequent servo forces and longer travelling distance of the sliding bearings in the Kaplan turbine.Based on one selected Kaplan turbine, Selsfors G1, measurements and MATLAB calculations have been performed in order to determine forces and movements of the linkage system. With these forces and movements as input, stresses and fatigue have been determined as well as sliding distances, bearing pressures and wear of bearings during a typical lifetime of 40 years.The results indicate that no severe wear exists on the bearings during 40 years of service.

BACKGROUND: Today?s societal changes, including high rate of change and increasing information flows, are increasing the demand on the individual mental capacity. It becomes increasingly difficult to analytically process all the different dilemmas and everyday decisions as individuals have a limited mental capacity available to make these decisions. Thus, it has been suggested that ego-depleted relies more heavily on intuition, which is less burdensome, when making decision. However little is known about to what extent intuitive decisions differ from analytic.

Today, we use BKR and BBK 04 when designing concrete structures inSweden, which will, in the near future, be replaced by Eurocode 2. When you are designing buildings, you will use Eurocode 2 Part 1-1 and with this new standard, some new rules and general rules will be necessary to adopt. To examine how BKR and BBK 04 tells apart from Eurocode 2 when designing concrete structures, one beam and one column with often common dimensions, is studied. The beam is designed with consideration of (considerate to) durability at bending moments, shear forces and control of cracking. The column is designed with consideration of durability at eccentric axial load and bending moments in cross section on account of (due to) geometric imperfections. BBK 04 has gone one step closer to Eurocode 2 than earlier editions and the things that are different, when calculating reinforcement, is how they use the partial factors.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.