With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

The knowledge of the chloride content and its fluxes and patterns in trees is insufficient. Increased knowledge would be desirable, one of many reasons is to be able to more efficiently meet the problems that the substance causes in the pulp industry. The purpose of this study was to examine and describe the chloride concentration of Norwegian spruce (Picea abies L. Karst.) in the south of Sweden. Furthermore the aim was to be able to predict chloride concentration from readily measurable site factors.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

The project, Flexible Snowboard System, has been carried out by the project group independently and is a module developed for snowboarders, ski rentals and ski schools. The problems of today?s solutions are that they cause the user an inconvenient standing position when riding the ski lift or skating the transportation slope, also mounting, adjustments and disassembling of the bindings are time consuming and brings undesired wear to the screws and screw holes. In addition any adjustments require that the user steps out of the bindings and have tools at hand. Flexible Snowboard System is a universal module which means that it can be assembled with all of today?s snowboards and bindings.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

The objective for this master?s thesis was to test and evaluate two methods for determining the content of tannin in a pinebarkextract. The methods used at Södra for this previously have not been specific enough, only the amount of polyphenolics have been measured. One of these methods is a test based on the Stiasny test and it determines the extracts ability to form a gel with formaldehyde. When this test was carried out it showed that the extract did not contain much tannin.

The use of renewable resources is rapidly increasing in Sweden, especially the use of fuel pellets. Through pelletizing the energy content per volume unit is greatly increased and the pellets are more homogeneous with regard to moisture content, particle size and density compared to unrefined fuels like forest residues and chips. For further development of the Swedish pellet industry, the use of different assortments from lodgepole pine (Pinus contorta Dougl. var. latifolia) is of particular interest, mainly because of its high volume production.

This work was conducted during spring and summer 2012 together with the company Uppsala Academy of Management as the principal. The two main objectives for the work are that: ? Make a comparison between the measured volume in the standing forest and the measured volume at the industry on Uppsala Academy of Managements actual stumpage sale volume to see how well it conforms. ? Examine if the buyers see any particular advantages or disadvantages of actual stumpage sale volume and what they think of Uppsala Academy of Managements actual stumpage sale volume and structure in general. I chose to use actual stumpage sale volume from the tree years 2009, 2010 and 2011 in my work. I divided the actual stumpage sale volume following four categories which was pine, spruce, pine/spruce and seed trees. After that I picked out sixteen actual stumpage sale volumes from each category to be a part of the work.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

The calculations in this thesis are evaluating the profit as a consequence from treating young stands of pine in Sweden with birch bark extract, BBE. Treatment is to be done with the object to lower or fully reduce the moose browsing on pine. The study is made in three versions. The results from each version separately will follow below. Version I.: The size of the moose population is in no way affected by the reduced resources of food as a consequence of large scale treatment with BBE on pine. Results show profit at a 3 percent level of interest with the exception of treatment program with more than 4 treatments all together and with the exception of Västerbottens Län with an early first treatment. Version II.: The population of moose decrease from 10 to 5 individuals per 1000 ha as a consequence from large scale treatment with BBE on young pine stands.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

 Inse mitt värde och behåll mig en stund till är ett utforskande projekt i hållbar textildesign. Huvudfokuset i projektet är att utforska vilka möjliga designlösningar som kan ge produkter egenskapen av föränderlighet och på så vis möjliggöra en förlängning av deras livscykler. Detta undersöks utifrån ett eget formulerat förhållningssätt till hållbar design, genom praktiska experimentella undersökningar av olika material och föränderliga mönsterbilder. Detta kombinerat med att ge konsumenten en aktiv roll i förändring av en produkts utseende och funktion. Projektet resulterar i tre produktprototyper som på olika sätt gestaltar föränderlighet och det formulerade förhållningssättet.