At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether Bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for Bark powder, the work has mainly been focused on Bark powder.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

Frågeställningar:- Hur arbetar Carpenter Powder Products och deras anställda med att upprätthålla relationerna till sina kunder?- Vilka faktorer ser Carpenter Powder Products anställda som de viktigaste i en affärsrelation?Syfte: Syftet är att kartlägga hur de anställda på Carpenter Powder Products arbetar med att upprätthålla relationerna till sina kunder samt vilka faktorer som är viktigast inom affärsrelationer. Detta för att skapa en djupare inblick i hur ett industriellt företag inom en B2B bransch arbetar med sina kundrelationer.Metod/teori: För att kunna se hur Carpenter Powder Products arbetar för att upprätthålla sina kundrelationer genomfördes kvalitativa intervjuer med sex respondenter. Studien utgår från Grönroos teorier då författarna anser det intressant att testa relationsmarknadsföringsteorier som är menade för ett tjänsteföretag, på ett industriellt B2B företag istället.Resultat: Resultatet av studien visar att Carpenter Powder Products arbetar aktivt med sina kundrelationer för att skapa långsikta relationer på olika sätt men att det i nuläget saknas ett strukturerat kundvårds-system som både kan förbättra och förenkla deras kundrelationer. Av de faktorer som anses viktigast i affärsrelationer var det förtroende som stack ut hos studiens respondenter.

Bark-stripping by red deer (Cervus elaphus) cause extensive damage to economically valuable spruce trees (Picea abies) in Swedish forests. The underlying causes for bark-stripping are not fully understood, and the frequency and severity of damage unpredictably differ between regions. In this study, I investigated if landscape structure (e.g. agricultural dominated landscape opposed to forest dominated landscape), forage availability, population density and disturbance (e.g. roads and settlements) affect bark-stripping frequency.

The background to this study is that the forest company, Holmen, has found large discrepancies between harvested volume and the measured volume at the industry. Factors like bark features, breakage, double tops, bends and stem damages was noted, and all stems were measured manually. Hypothesis testing with the method "random in pairs" were used to examine whether the harvester measured values significantly differed from the manually measured. The result of a properly calibrated harvester shows in average underestimation of the volume with Skogforsk Pine as a bark function. This means that the harvester isn´t the reason why the volume measured in the industry is lower, the fault is elsewhere. The study also indicates a need for a unique bark function for logepole pine..

Humans have inhabited mountainous areas in northern Sweden since the end of the last glacial period, ca 8000 B.P., and their presence has marked the landscape in various ways. Older traces include the remains of hearths and dwelling sites, but there are also remains, such as culturally modified trees (CMT's), resulting from more recent activities in forested areas. This study aimed to document how people, both indigenous Sami's and Swedish settlers, have used an area northwest of Ammarnäs in Västerbotten, during the last 300 years, and what traces their activities have left in the area. I used historical records as well as an inventory of CMT's in the area to address this aim. Historical records of Sami activity are meagre, but it is clear that the people of the Ran and Gran Sami villages utilized the area long before 1500 A.D.

Bark-stripping by red deer (Cervus elaphus) cause extensive damage to economically valuable spruce trees (Picea abies) in Swedish forests. The underlying causes for bark-stripping are not fully understood, and the frequency and severity of damage unpredictably differ between regions. In this study, I investigated if landscape structure (e.g. agricultural dominated landscape opposed to forest dominated landscape), forage availability, population density and disturbance (e.g. roads and settlements) affect bark-stripping frequency.

The filters used today to purify water are often expensive and the need to find new filter materials is substantial. Studies of pine bark have shown that this is a material that may be used as an alternative to conventional filter materials, such as activated carbon. However, the study of pine bark has shown that a leakage of phenolic compounds may occur when using the material for water purification. Therefore, the purpose of this report is to investigate the release of phenols from pine bark, in order to evaluate the use of pine bark as a filter material. Another assignment is to investigate the amount of metals adsorbed by the filter material.

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.

Studies have shown that air pollution, as well as bark fissure depth and sun exposure of a tree can have an effect on lichen growth as well as abundance of lichen species. The aim of this study was to find out the relative importance of these factors. 211 oaks in south eastern Sweden were surveyed for presence of 17 lichen species, as well as the total number of lichen species. Half of the trees were situated in urban areas and half in the countryside. For each tree the bark fissure depth was measured and the sun exposure of the trunk was estimated.

The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

Plagionotus detritus is a threatend longhorn beetle that only exists at one site in Sweden. It is saproxylic and depending on recently dead coarse oak wood for its larval development. Trees at Djurgården, Stockholm that have been colonized by Plagionotus detritus has been studied to find out the habitat preferences of the species and to see what affects the density of beetles in a tree. The bark of some trees and wood from the breeding project at Nordens Ark has also been studied to find out what affects the species reproductive success. The reproductive success was measured in two ways, the larval mortality and the size of the hatching holes.

The spruce bark beetle (Ips typographhus) is one of the 25 000 species of insects in Sweden, an insect of great economic importance because it can alone terminate forest of high value. During the past decade, insights of climate change received with increasing attention. If the future brings a milder climate in the north and therefore a longer growing season, one would think that it would only affect the forestry to the better? Yet in recent time, outbreaks after storm felling seems to occur more frequently. The Spruce bark beetle ruins millions of cubic meter of Norway spruce (Picea abies) in Sweden alone, with more frequent storm felling and a larger amount of wind thrown threes in the forests there will also be room for an advancing reproduction.

Naturen inspirerar mig, i detta projekt jobbar jag med strukturen hos trädstammar och bark, och översätter det jag ser till vävda textiler. När jag befinner mig i naturen känner jag mig ofta lugn och kan koppla bort allt annat i min omgivning. Det lugnet vill jag återskapa och föra in i en rumslighet. I barkens olika strukturer såg jag intressanta varierande ytor som jag ville jobba med i textil. I mitt examensarbete har jag designat textilier med uppmätt akustiska egenskaper för offentlig miljö.