Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

In the collections of the Vasa Museum, 100 leather objects have exhibited salt precipitations. The objects, that have previously been impregnated with PEG, have become deteriorated and fragmented due to the precipitations. During a previously conducted study it was established that the precipitations consisted of iron and sulphur. However, it was not established whether they occurred in the leather?s inner structure and no treatment plan was developed.

Aim: The aim is to create a review that examines different forms of massage therapy and their effects on hypertension.Method: Literature review of 10 scientific articles on the subject of massage and its effects on blood pressure. The literature searches were made with PubMed and Cinahl using the keywords "massage therapy", "effects" and "blood pressure".Results: The articles showed that massage had a positive effect in lowering blood pressure. This could be explained by greater extent of relaxation in the participants investigated and an increased activity of parasympaticus and reduced secretion of stress hormones. The articles do not agree on what form of massage therapy is most effective in lowering blood pressure and it is uncertain for how long the effect can remain.Conclusion: Massage is usually seen as a treatment without scientific basis. There is evidence that suggests that massage therapy is an effective treatment for lowering blood pressure.

Aim: The aim is to create a review that examines different forms of massage therapy and their effects on hypertension.Method: Literature review of 10 scientific articles on the subject of massage and its effects on blood pressure. The literature searches were made with PubMed and Cinahl using the keywords "massage therapy", "effects" and "blood pressure".Results: The articles showed that massage had a positive effect in lowering blood pressure. This could be explained by greater extent of relaxation in the participants investigated and an increased activity of parasympaticus and reduced secretion of stress hormones. The articles do not agree on what form of massage therapy is most effective in lowering blood pressure and it is uncertain for how long the effect can remain.Conclusion: Massage is usually seen as a treatment without scientific basis. There is evidence that suggests that massage therapy is an effective treatment for lowering blood pressure.

Although Sweden is considered to be one of the world?s most equal countries, studies show that social work to a large extent is characterised of stereotype conceptions about men and women. This implies that clients with addiction problems are treated by there gender belongings and not from there individual needs. The purpose of this qualitative study was to examine how aware the social services are regarding gender perspectives and equal opportunities among male and female addicts. The social workers that were interviewed had different opinions about what extent the gender perspective had in the treatment of the clients.

The purpose of this study was to investigate the occurrence of Verotoxin-encoding bacteriophages in mussels, cultured downstream the sewage treatment plant in Lysekil.Mussels were collected in three growing areas from April 2008 to March 2009. Real-time PCR was performed for detection of vtx1 and vtx2 genes and enrichment of bacteriophages on non Verotoxin-producing Escherichia coli O157: H7 was carried out. All samples in real-time PCR analysis were negative; no presence of Verotoxin-encoding phages was shown. No plaque was formed on blood agar base plates, indicating that no bacteriophages had been taken up by E. coli bacteriaThe levels of Verotoxin-encoding phages and E.coli outside the sewage treatment plant in Lysekil were not high enough to be able to form VTEC in mussels, indicating that the faecal contamination was low.

On commission of the County administrative board in Värmland County a method was developed for analysis of the occurrence of artificial land use at lakes and watercourses. With artificial land use is meant land significantly affected by man. Two bases have been used to carry out the analysis. In one of the analysis the vegetation database and in the other GSD¹-Marktäckedata (land cover data) was used (this method has been used by County administrative board in Jönköping County).The analysis comprises all watercourses within Alsterälven river basin. The digital water bodies are created by the Swedish Meteorological and Hydrological Institute on the basis of GSD-Översiktskartan (general map).

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

The purpose of the project was to exam steams ability to sterilize carrots infected withLactobacillus plantarum. The project was a cowork with Brämhults Juice AB. They hadobserved an increase of Lactobacillus in the production of carrot juice during the summer. Tokeep the flavour of fresh fruits, the juice is treated carefully with heat. This means that thejuice only stays fresh for a few days, around two weeks for an unopened package and threedays for an opened package.In an attempt to remove the remaining Lactobacillus of the carrots, steam is tested as an extrastep in the production of juice.

This thesis investigates the overall risks of flooding over the Design Basis Flooding Level (DBFL) at the Swedish nuclear power plants (Oskarshamn, Ringhals and Forsmark), using statistical data and methods, but also considers historical events which might affect the overall risk of flooding at the specified sites.Considering the nuclear accident which happened in Fukushima in conjuction with the earthquake and tsunami which struck eastern Japan on 11 March 2011, operators and licensors of nuclear power plants all over the world conducted reviews and investigations on the overall risks posed to the plants from external events. One important such event is extreme water level.One part of the thesis includes an extreme value analysis (using Generalized Extreme Value distribution and Generalized Pareto distribution) of water level data from SMHI (Sweden's Meteorological and Hydrological Institute) measured at stations close to the Swedish nuclear power plants. The results of the statistical studies indicate that considering the return period used in the thesis (100 000 years), the water levels at the Swedish nuclear power plants are not expected to exceed DBFL.The other part of the thesis consists of a historical study of extreme weather-related events. The results of this study indicate that no historical events seem to have occured which would indicate a higher risk of flooding than the one suggested by the statistical study. .

In this bachelor essay an attempt is done, to recreate a probable Bronze Age landscape on Gotland, with GIS as a tool. The landscape on Gotland is situated with many different monuments dated Bronze Age, such as cairns and stone ships. In creating of the maps, two possible shorelines contemporary with the Bronze Age have been calculated and marked on the maps. Furthermore, peat lands have been drawn upon the maps, by using the information from geological maps.A landscape variable have been compared between Bronze Age places and Early Iron Age houses; the soil type. On Bronze Age places gravel is the most common, while moraine marl is the most common on places with Early Iron Age houses.From a selection that were made, all Bronze Age places where within 3 km from the water, either the recreated shoreline or peat land.

Headwater streams are affected by anthropogenic impacts at multiple scales. One aspect of human impact is sediment transport associated to the abundance of stream structures as large woody debris and the composition of the riparian zone from forest to agricultural landscapes. Riparian buffer zones and stream structures like dead wood are considered as generally important structures for protection against an increasing amount of sediment particles in the water. Hence, in this study these structures were quantified in thirty different stream segments on land and in the water. To measure the transport of sediment Whitlock-Vibert boxes were used in three different types of landscapes; forest, transition and fields. The boxes were left in the stream segments for three months, the taken up and dried and weighed. The results showed that the transition-land in Frösvidalsån had the highest sediment transport. The second highest transport of sediment was in Blackstaån at the fields.

During the migration season in 2013 a study on spawning migrating salmon and the effect of water flow on the behavior was conducted of the salmon at the Forshaga hydropower station in the River Klarälven. The River Klarälven with its nine hydropower plants on the Swedish side, constituting migration obstacles for the migrating salmon. Fortum Generation AB has together with the County Administrative Board restored a salmon trap at the lowermost hydropower station in Forshaga, aiming at making it possible for the salmon to swim into the trap, and thereafter be transported by truck past the power plants and then continue their journey to the spawning grounds on their own. Unfortunately, it is believed that the trap does not work as well as it should. In this study, I focused on salmon position in relation to water flow and if the number of salmon that swam into the fish trap differed between salmon with previous experience of the trap (experienced) and salmon without experience (unexperienced).

The aim of this study was to investigate patients? experiences of pain during dental hygienist treatment and scaling. The study is based on a questionnaire and includes 129 patients, from four dental clinics in Skåne, Sweden. The questionnaire consisted of ten questions with a Visual Analogue Scale as a main question. Questions about age, gender and dental anxiety were also included.

Bacteria are a problem that occurs naturally in dishwashers when the dish stands there dirty for an extended period of time. To get rid of the unpleasant smell that the bacteria is causing, the most common solution is to run a regular washingcycle which can cause problems for the environmentally-conscious consumers since this causes unnecessary energy waste and emissions of chemicals in the washwater. To solve the problem in a more environmentally-friendly way by directly attacking the bacteria with an appropriate bacterialreductionmethod can therefore be an attractive feature in a dishwasher. There are many different ways to treat surfaces that have been exposed to the bacteria. Some high-profile methods are UV-radiation, microwaves and oxidant (ozone) that all three have had success in reducing bacteria in different contexts.