The composing of new standards in the area of machinery safety is a continuous work which aims at writing standards that works as a tool for companies and enables them to control if the fundamental demands of security and health which is prescribed by law are reached. It is optional for the companies to choose if they want to use the standards. This report is written in cooperation with SIS and the study were performed within the technical committee SIS/TK 282. The report aims to investigating if the companies that choose to use standards see any economic advantages due to this work, how these advantages take form and where they originate. The main question formulation is how the profitability among companies that have adjusted their production to machinery safety standards are affected. The study was performed with an initial literature study which aimed at obtaining knowledge and an overview over the subject as well as investigate what former studies had resulted in.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

Aim: This paper aims to produce a serviced office concept adjusted to Statens fastighetsverk. The concept will make SFV:s properties more attractive for renting. Method: Information has been collected from interviews with 13 different serviced office companies, one serviced office agent and eleven government authorities. Also litterateur, reports and internet have been used in gathering information.I will use following questions:¨      How is the serviced office concept designed?¨      Which customer segment should SFV direct to and what need does the segment have?¨      How shall a marketing plan look like for the concept?¨      How should a concept designed for SFV look like? Result & Conclusions: Serviced office space is a company that letting functional workspace with access to shared facilities e.g. reception, office machines, internet, phone and more.

The transformer is one of the most common and most important electric machines for power companies. Cost of investment and the economic worth of a transformer are counted in millions of SEK. Because of that, proper maintenance actions that may lead to longer technical life time should be the aim in all situations.The aim with the report was to perform transformer diagnosis by dissolved gas analysis on Umeå Energi AB´s power transformers and a risk assessment. The report should also contribute to longer life time for the transformers.Oil samples were taken from each transformer two times. The first sample in summer 2013 and the second in April 2014.

Aim: This paper aims to produce a serviced office concept adjusted to Statens fastighetsverk. The concept will make SFV:s properties more attractive for renting. Method: Information has been collected from interviews with 13 different serviced office companies, one serviced office agent and eleven government authorities. Also litterateur, reports and internet have been used in gathering information.I will use following questions:¨      How is the serviced office concept designed?¨      Which customer segment should SFV direct to and what need does the segment have?¨      How shall a marketing plan look like for the concept?¨      How should a concept designed for SFV look like? Result & Conclusions: Serviced office space is a company that letting functional workspace with access to shared facilities e.g. reception, office machines, internet, phone and more.

The competition policy in the EU should guarantee that the competition is not distorted in the way that would prevent or create difficulties for the free mobility of goods and services between Member states. It is prohibited for companies to abuse their dominant position according to Article 82, if it affects trade. The essence of Article 82 is control of market power. The perfect competition results when supply and demand appoint the price and quantity of a product. Firms are encouraged to compete then it results in efficiency, quality products and lower prices.

The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district. The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.

The purpose of this thesis work is to create a prototype for an augmented reality application that isaimed to support service technician when performing service and maintenance of machines andengines. The prototype will be used for investigating what technical limitations there is and toestablish basic usability for the user interface. The method that is used is user studies and analysis toevaluate use cases and user stories. An iterative work process is then applied for design and theprototype is continuously user tested.The resulting prototype uses a Samsung Galaxy Tab 2 running on Android operating system. Theframework used for augmented reality is NyARToolkit which handles marker recognition andconnections to Android.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

When building large buildings, such as compartment buildings, there is a number of deliveries arriving on the construction site daily. In order to receive these deliveries without disturbing the rest of the work going on JM often books a fixed unloading time. When doing that they can be prepared when the delivery arrives. Making sure there is a suitable unloading area, someone to meet the delivery and when needed proper machines, such as a tractor or a crane, to help unload bigger deliveries. The person receiving the delivery is supposed to make an acceptance control where they check the delivered goods making sure nothing has been damaged in transport and that they have received what they were supposed to receive.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.