Sedan år 1990 har medeltemperaturen i Sverige ökat med en halv grad. Denna temperaturhöjning är inte naturlig utan beror på människans moderna livsstil. I och med detta blir det viktigt för företaget som producent att hitta nya tillvägagångssätt att förmedla sin medvetenhet om företagets påverkan på miljön. Den frivilliga hållbarhetsredovisningen kan vara ett sätt. För att denna ska förmedla en så hög trovärdighet som möjligt kan den granskas och bestyrkas av en oberoende part, i de flesta fall av en revisor.Syfte:Syftet med denna studie är att utreda vilken roll revisorer har i hållbarhetsredovisningen och hur dessa anser sig kunna påverka hållbarhetsredovisningens utveckling.Genomförande:Studien har genomförts genom att koppla ihop olika teorier och modeller med den empiriska information som vi samlat in i form av intervjuer.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

Strömstad is a small city located on the Swedish west coast. Urbanization and development is acurrent issue for the municipally, as for many other in the current situation. The municipal housingcompany Strömstadsbyggen is one of the parties involved in the extensive development that mustbe implemented to meet the changes and developments which the issue holds.One area that is of interest in the discussion is Rådhusberget - this due to the existing infrastructureand unique qualities that the area holds. In order to achieve the best solutions possible for the area,Strömstadsbyggen wishes to listen to what the existing tenants at Rådhusberget thinks and feelsregarding the area and its future potential.This thesis has therefore been carried out in collaboration with Strömstadsbyggen and has beenaimed at identifying the current tenants' thoughts and opinions in the existing area of developmentand infill potential. The aim of this work was also to investigate how the tenants value their homeand local environment in its current state, and what their wishes are for the possible futuredevelopment of Rådhusberget.To achieve analyzable results concerning how the tenants perceive these aspects, an extensivesurvey have been carried out which were sent out to all tenants in the area.

The aim of this study is to examine the significance of having a music department at the public library in Enköping, and how the organization of the phonograms is handled. The different areas examined are the reason of the reintroduction of a music department, its budget, its users, the work with selection, the marketing, statistical data concerning loans, the work with classification, indexing, and organization of the phonograms and the future of the music department. The empirical material consists of qualitative interviews with staff connected to the music department at the public library in Enköping. For the theoretical frame, Sanna Taljas discourse analysis of music libraries in Finland is used. Talja presents three discourses which all show different views on what kind of material a music library should contain.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Abstract The extraction and usage of energy give rise to immense environmental problems which helps to accelerate climate change. Energy is an important resource for the community and there are a variety of different types of energy sources available, that are either classified as renewable or non-renewable energy sources. The usage of renewable energy sources cause less environmental impact than the usage of non-renewable energy, which in turn means that the energy?s strain on the environment is strongly affected by the type of energy source used.The aim of the study is to describe to what extent attitudes towards renewable energy are affected by whether the individual is male or female, by examining the hypothesis regarding how women have a closer connection to nature and to a larger extent shows on an pro-environmentally friendly behavior than men, and if it also can be detected on issues related to renewable energy and thus imply that women have a friendlier approach towards renewable energy than men. A number of ecofeminist believe that women have a stronger bond with the nature through her embodiment as a woman and by her maternal role, which according to previous research also leads to the fact that women shows on a more extensive environmental behavior.Through a qualitative research method in the form of semi-structured interviews has three female and three male respondents been asked questions with regards to the environment, individual responsibility and energy.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

pelago. There is an old inn that is located on the island that has become a very popular attraction in the last couple of years. The inn has both a well-known restaurant as well as conference facilities that are used by tourists as well as the people of Stockholm over the summer months. The inn was built 1908 and has since remained in the same condition.make islands in the archipelago more environmentally friendly and promote sustainability. One of their project islands is Grinda.

Today it is mandatory for every college or university student to pay a union fee to their student?s union. The fee is mandatory and is a payment for writing examinations, receiving grades. The fees purpose is also intended to secure the education quality and student influence. In the presence of the abolishment of the union fee the Swedish student?s unions stand before an uprising competition between themselves and most likely a decrease in membership.

It is important to investigate the potential of biological control measures in agricul-ture, especially where economic issues restrict the use of expensive inputs or when there are environmental concerns about toxicity of agrochemicals. The bacterium Bacillus subtilis has proved promising as a biocontrol agent (BCA) in suppressing various plant diseases and it has also been shown to promote plant growth in certain cases. During this study, the effect of B. subtilis on Fusarium wilt (caused by the fungus Fusarium oxysporum) on tomatoes, as well as its effect on the earthworm species Pontoscolex corethrurus was investigated. Furthermore, the combined ef-fect of the BCA with P.