The City Library has a problem getting children interested in reading. Futhermore, there are no clear signs to aid children to navigate themselves to books targeted to their age group. To solve this problem, this thesis aims to design signs that is both illustrative and informative.Of the images that were tested during the research, I would assume that children in such a wide age range requires the simplest level of abstraction from testing the three testing icons, since the second level of abstraction was not interesting enough for the kids. The third, nearphotorealistic level was most liked by the children who were in the city library more often and looked for books themselves..

This study has researched how user click heatmaps and eye tracking can be utilized in usability testing. We have used the tools SessionCam and Tobii. We designed a website for a small clothing store and conducted usability tests, in order to evaluate the users clicks and eye movements in relation to design choices on the website. The aim of this study was to research how these tools can be integrated in usability testing and how results from the tests can be used to improve usability. We were able to use the recordings of clicks and eye movements and make design changes based on the findings.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

The aim of this study is to examine the patient's understanding of the counselling while testing for an STI. The method was an inquiry directed to patients at two receptions, where tests for STI are made, and on the Internet for patients who made a test within the last year. The study involves 95 participants, 39 answered the inquiry directly after the test. The main results show that most participants are positive to talk about their sexuality and sexual strategies with the personnel, irrespective of who takes the initiative to the counselling. Women are yet more negative then men to talk about their sexuality, even if the test is made voluntarily by the woman.

This paper describes Tempus Custode, a smartphone application with which the user may register working hours and travel time during the work day. The application communicates with a database via a server. The data stored in the database may be manipulated using an administrator tool, mainly for the composition of time reports. In this way, the user?s task of time reporting his day is greatly simplified.The application is able to automatically discriminate between work time and travel time, as it continuously fetches positioning data from the smartphone GPS receiver.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

Oxygen consumption and carbon dioxide production are usual measurements within the sports and training physiology. The same measurements are also common when it comes to establish the amount of energy that is used during work and to establish the intensity of work. The volume of oxygen that is consumed contra the volume of carbon dioxide that is produced can be used to calculate the metabolic rate within the human body. This calculation shows the percent relationship between carbohydrates and fat in the metabolism. The first accurate method to measure the breathing gases for use in metabolic calculation was established in the early twenty century when the Douglas bag method was introduced.

The effects of dexmedetomidine and butorphanol sedation on skin reactivity during intradermal testing in healthy dogs were evaluated. The effects of dexmedetomidine and butorphanol were compared to medetomidine, a sedative agent having scientific proof of not interfering with skin test reactivity, in a randomised, double blind, cross over study performed on 8 adult dogs. The dogs were sedated with medetomidine (Domitor vet.®, 0,01 ml kg-1) intravenously, or dexmedetomidine and butorphanol intramuscularly (Dexdomitor vet.®, 0,01 ml kg-1; Dolorex vet., 0,01 ml kg-1) after which they received intradermal injections of positive control solutions (histamine 0,1 mg ml-1, 0,05 mg ml-1, 0,025 mg ml-1), a negative control solution (0,9 % NaCl) and allergen extract (Dermatophagoides farinae, Cladosporium and Artemisia vulgaris). After a wash out period the trial was repeated with a reversed sedation protocol.Skin reactivity (wheal size, induration and erythema) and quality of sedation (immobilization, response to stimuli and injections as well as over all working conditions) were evaluated. The combination of dexmedetomidine and butorphanol provided reliable, good sedation and analgesia without adverse effects.

During the past few years there has been an observed decrease in physical fitness within different patient groups. As a part of the rehabilitating physiotherapy treatment it is important to acknowledge the physical condition of the patient. Physical fitness testing might be difficult due to physical limitations within different patient groups. A broad range of exercise tests is therefore of importance in clinical practice. The aim of this overview was to describe exercise tests used in rehabilitation contexts, and to define areas of use and restrictions.

There are several ways of conducting software testing where some may include users and others may include personnel whose work task is to execute test on systems. Although most developers and project managers understand the point of testing the system, it is not always being done and the most common reason is that there is no time for it. However, this is a false assumption as it may instead cause some bugs in the system that would not have been there in the first place if tests had been there to prevent bugs in the code.My purpose for this thesis was to find suggestions for changes in the development process in an ongoing project used by Acino and Svenska Försäkringsfabriken in order to increase the quality of the system used. In this thesis, I have approached the purpose by pursuing a case study of the two companies through observation and interviews. By doing this I acquired the relevant information to make suggestions for change.

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

This essay examines pull-out strength of threaded rods fixed into glulam timber. The technology is intended to be used in hidden joints between glulam components. The work began with a study of literature focusing on current research within the topic, mainly to create a base of knowledge before the testing was initiated. Studies of scientific articles reveals a lack of research within this area, which makes it difficult to develop standards and calculation models for these joints. The drill holes in the tests have a diameter of 7 mm.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

An ethnographic study loosely informed by the theoretical framework of distributed cognition was carried out in order to describe how mariners have adopted the Automatic Identification System (AIS) in their work practice, or"made the technology their own". AIS is a transponder-based identification and communication system that allows ships to automatically identify and track each other. In addition to facilitating the identification and tracking of ships, objectives behind the introduction of AIS are to"simplify informational exchange", and"provide additional information to assist situation awareness". Participant observation and interviews were made at four different ships, as well as at two shore stations. A focus group was also held at a maritime conference.