Knowledge is today one of the most important resources for an organization to handle. But knowledge can also be difficult for organizations to manage. The internet is still growing and new tools take form that allows users to effectively share information. The purpose of this report was to describe how organizations can make use out of internal social media to facilitate knowledge management processes. Three issues involving mapping, coding and dissemination of knowledge to were produced to answer the thesis. The study was limited to examining the identification, coding and dissemination of knowledge through the internal social media plattformen, IBM Connections. The theoretical framework emphasizes how social networks can promote knowledge sharing, how a knowledge mapping can promote knowledge dissemination and sharing, how knowledge can be stored in data sources and how important interaction is to spread awareness. The theory has been supplemented by descriptions of how the system IBM Connections works. Surveys were conducted on four companies that use IBM Connections as an internal communication plattformen. The four companies were selected to illustrate how they use the plattformen of knowledge management processes and we chose to interview the people who were responsible for the introduction of the plattformen. The study identified several similarities between the different companies and that although there were some technical and cultural recalcitrant units against this new type of system within the organization so favored IBM Connections knowledge in several ways. The built-in search automatic created a map of knowledge through the plattform's user profiles. Saved files and documents could be found even after the employees left the company, which encodes knowledge into the company knowledge resources. The opportunity to interact with one another, often over great distances, favored the sharing of knowledge. A comparison with the theoretical framework provided us with the conclusion that internal social media can be used in several ways to Knowledge management through automated knowledge maps, the ability to store knowledge within the company and to communicate knowledge across functional and geographical boundaries in interactive discussions..

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers.

ABSTRACT Tobacco Rattle Virus (TRV) is a soilborne plant virus. It is an important pathogen in potatoes where it causes spraing disease. This disease can lead to significant economical loss for the farmer, so it is imperative to get the proper diagnose before planting. TRV is spread naturally by free-living nematodes (Trichodorus and Paratrichodorus). Transference of TRV to a plant occurs when the virus-carrying nematodes feed on plant roots. The relationship between virus, nematodes and plants is complicated, and has to these days not been fully characterized. The diagnostic methods available today do not work sufficiently.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

The theoretical focus in this master is information retrieval (IR), and especially the part of IR that includes interactivity. This research is by some researchers called IIR. Our principal aim was to examine if search engines on the WWW are taking advantage of research results from IIR research. A way to do this is to look at the application of special features, in this case query expansion (QE) and relevance feedback (RF). Both these methods aim for a better matching of documents and the searchers information need.

This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

This report is about how HDR (HighDynamicRange) can be created and used in combination with Tone mapping. This work has been carried out together with Kapsch TrafficCom AB in Jönköping.The objective of this project is to:Evaluate and investigate the effects given to pictures by HDR and tone mapping.Evaluate if the technology may lead to improvements in Kapsch?s systems.To construct a program which is able to handle some form of tone mapping or HDR-algorithm.These questions will be answered in this report:What kind of effects has HDR and tone mapping-algorithms on pictures?Can the HDR-technology give better data in Kapsch?s systems?The research method used in this report is called action research. This means the authors has investigated the technology by reading different documentations and by testing different algorithms to see what kind of result they give. The report describes some of the tests made to see if the technology is appropriate in Kapsch?s system.There is two smaller reports made by the authors which documenting some of the work.The first report describes the work with different settings for a camera to create pictures with HDR-quality.

The trend towards increasingly large farming units raises questions regarding how to better monitor production. Larger units make the impact from possible errors more severe, which increases the pressure on management supervision. To cope with management issues, prevent errors and handle increased demands on traceability and documentation, the Real Time Location Systems (RTLS) concept is making its way into various parts of agriculture. In sectors outside agriculture, RTLS are already being used successfully to track and locate items through nodes at different levels of accuracy, such as room level or the relative or absolute position. Empirical data can be received in real time from the nodes.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

Due to the growing wild boar (Sus scrofa L.) population in Sweden there has been an increase in wild boar related traffic accidents, damage on cropland, and conflicts regarding the management of the wild boar. Knowing what makes the wild boar reproduce and survive more or less successfully in different geographic areas is an important part of managing the population. According to previous studies the wild boars rate of increase varies from county to county. The aim of this study was to test, on the county scale level, if landscape composition and diversity as well as people and hunter densities might be the reason for this variation. The first hypothesis was that a big proportion of forests and cropland would increase the rate of increase.

Swedish dairy production has during the last decades undergone considerable structural rationalisation and the number of dairy herds has decreased to less than 7000. At the same time the average herd size has increased and a large proportion of those investing in new buildings today choose automatic milking (AM). During 2008 more than ten percent of the Swedish cows will be milked with AM. The development has been faster than expected and the need for consulting has increased rapidly. This study aims to evaluate whether a check list originating from the FRISKKO (?healthy cow?) programme can be a useful tool when assessing how well the herd functions in various areas.

This paper aims to broaden the discussion on how press freedom can be a powerful tool in the war on corruption. Previous studies have shown a significant relationship between more press freedom and less corruption, it also shows that the causal link runs from press freedom to corruption and not the other way around. There are quite a few studies on the impact of a free press on corruption and therefore there is a lot more to be published on this issue.This paper looks at press freedom as one of the most important parts of a democratic society and that it plays a vital role in reducing corruption as both an informant on key issues and also as a ?watchdog? on society. But press freedom cannot be seen as an ?easy fix? in a country or the international community's struggle to reduce corruption.

Rapporten är en sammanställning av gruppens samlade erfarenheter och lärdomar av ett projekt vars syfte var att utveckla ett verktyg som ska visualisera svarstider mellan mobila klienter och datacenter. Genom att använda kontinuerlig prototypning har gruppen kunnat arbeta på ett användarna sätt för att uppfylla kundens verkliga behov. För att uppnå detta användes utvecklingsmetodiken Kanban. Under projektets gång anpassades metodiken för att bättra passa in i arbetet.Projektets användartester har lett till sammanfattande erfarenheter om visualisering av data. Visualiseringar som projektgruppen ansetts tydliga uppfattades inte alltid på samma sätt av användarna.