The demands of environmental effects in today?s companies have been increasing more andmore. To be able to withstand customers, cooperatives and government demands the ISO14001 certification should not be neglected.In January 2007 the general management of SAS decided to introduce an environmentalmanagement system for SAS Tech. The work which has been carried out is a part of thecertification process of ISO 14001 which will be completed by the end of year 2009.The aim is to create auditroutines for the company in order to be able audit ISO 14001standard internally which is a demand to get certified and to keep the certification in thefuture. A schedule has been done which audits different part of the standard at every auditduring one year.

NorFor is a cooperative project between the consulting organisations owned by the farmers in the Nordic countries ? Sweden, Norway, Denmark and Iceland. The project started in 2001 and the outcome, the system for ration calculation NorFor Plan and the model for evaluating the ration NorFor Evaluation, was completed in 2006. Along with NorFor Plan economical optimization are available and according to literature, the optimization will generate a 2 öre lower feed cost per kg milk, and thereby improve the profit for the farmer. The use of NorFor Plan in Sweden for feed optimization during spring 2008 has been very small. In this study eight herds in the middle of Sweden fed half the herd according to the classical system used in Sweden and the other half according to NorFor Plan system.

In almost every workplace today IT-systems have strong and significant roll in theeveryday work. It is therefore important that the systems have a good functionalityand that they work as an aid for the users. This thesis aims to study the systems atthe company Telge Nät and to analyse them from a usability perspective. By using thisperspective it has been obvious how difficult it is to make improvements on usability,once the system is in place. Even other larger improvements of the systems aredifficult to make at this stage and this is something that the users are aware of.

This thesis work is the result of the company Prisjakt?s wish to develop and improve its current system of opinions for online stores. The challenge was to develop a similar system that competitors are using but better. The collection of information is based on purchases and are collected from Web-shops. The purchases can then be monitored in a control panel.

Detta är ett 10 poängs examensarbete på C-nivå vid Karlstads Universitet. Målet med examensarbetet var att utveckla ett befintligt system för webbaserade kurstest så att det också kan användas för duggor. Säkerheten skulle förbättras så att studenter blir tvungna att logga in med användarnamn och lösenord när de ska skriva duggor. Resultaten från de studenter som skriver duggor skulle sparas i en databas. Vi hade också som mål att låta studenter testa systemet och att låta dem fylla i en enkät med frågor om vad de tycker om ett webbaserat system för duggor.Det resultat vi har kommit fram till är ett system som både hanterar webbaserade kurstest och webbaserade duggor.

The demand for district heating is expected to decrease in the future, due to competition from heat pumps and energy efficiency measures in buildings. Development of existing district heating systems is therefore necessary for district heating companies to maintain market shares. This Master?s thesis describes and investigates the heat and electricity production and profitability of a combined Organic Rankine Cycle (ORC) and heat pump that is integrated with an existing district heating system. The studied district heating system is utilizing heat from waste incineration. In Sweden waste constitute 20 % of the fuel mix used in district heating systems, and this share is expected to increase in the future.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Under de senaste åren har e-underhåll väckt ökat intresse. Det är en underhållshantering där exempelvis ett fordon hanteras och övervakas över internet. Inom detta område finns det olika tekniker. En sådan teknik som vuxit fram under de senaste åren är ?remote diagnostic system? eller fjärrdiagnostiska system.

Syftet med detta examensarbete var att undersöka vilka faktorer som påverkat acceptansen hos användare, inom den kommunala verksamheten, vid införande av ett datoriserat system. Med acceptans menas att användarna ska kunna utföra sina arbetsuppgifter på ett bra och lätt sätt. Studien har gjorts utifrån användarnas perspektiv.Genom att genomföra en intervjuundersökning på ett flertal kommuner där användarna använder systemet Vabas/Duf, har undersökts hur användarnas upplevda acceptans påverkas av faktorerna delaktighet, användbarhet och lättanvändhet, vid införande av ett datoriserat system. Delaktigheten vid införandet av ett system innefattar även information och utbildning.Resultatet från undersökningen visade att delaktigheten ökade användarnas acceptans. Ingen avgörande slutsats kunde däremot dras mellan acceptans och faktorerna användbarhet och lättanvändhet, då resultatet från de båda grupperna inte visade någon märkbar skillnad..

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

Organisations and projects use CSCW/Groupware systems for collaboration purposes. These systems and applications are in many cases using a non-transparent GUI, witch is also hard to learn. This paper present a novel system that aims towards being transparent and easy to use. This system, called CollMX, will be evaluated and different ideas for future development will be presented.  The evaluation and ideas are generated by an empiric evaluation and research in different areas related to CSCW. The research does not only focus on the area of CSCW, but also extends towards the Web 2.0 and ideas about awareness..

To support, enhance and, in the future, develop the activity within the county councils in Sweden, IT support systems are currently used to a large extent. The need to document is central to the health care organizations and the counties have come a long way in the introduction of electronic patient record systems (EPR). The aim of the EPR systems is to support the care processes and the clinical professions in their work.This is a master thesis in the area of human-computer interaction (HCI), Department of Information Technology at Uppsala University. The aim of the thesis was to describe and compare the five most common EPR systems in Sweden. The comparison will focus on some usability aspects and on how well they support the users in their clinical practice.