Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

Uppsatsen undersöker fem mäns berättelser kring krigsfilmen Saving Private Ryan, med fokus på maskulinitet. Föreställningarna och bilderna kring maskulinitet som kan urskiljas i intervjupersonernas berättelser, knyts till R.W. Connells teoretiska ramverk kring hegemonisk maskulinitet och de hierarkiska relationerna mellan olika maskuliniteter. Vidare resoneras det kring hur berättelserna exemplifierar en syn på mediepublik som aktiva meningsskapare, då intervjupersonerna tar fasta på olika aspekter i filmen samt ger den olika mening och betydelse. Slutligen belyses hur genus- och andra identiteter är något som kontinuerligt skapas i mötet med en mängd olika diskurser varje dag, samt hur själva handlingen att se på krigsfilm i sig kan ses som konstruerande av maskulinitet..

Automatisk sparning i datorprogram underso?ks fra?n perspektivet hur anva?ndare upplever tryggheten till att deras arbete ska finnas kvar na?r de arbetar med en dator, och hur de reagerar pa? en ny typ av design. Det finns ett problem som ligger i hur datorer rent tekniskt a?r uppbyggda, ja?mfo?rt med hur datoranva?ndare a?r vana att objekt fungerar i verkligheten. Nuvarande och gamla dator- program har tittats pa? fo?r att se hur de har lo?st funktionerna kring sparning.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

Oxygen consumption and carbon dioxide production are usual measurements within the sports and training physiology. The same measurements are also common when it comes to establish the amount of energy that is used during work and to establish the intensity of work. The volume of oxygen that is consumed contra the volume of carbon dioxide that is produced can be used to calculate the metabolic rate within the human body. This calculation shows the percent relationship between carbohydrates and fat in the metabolism. The first accurate method to measure the breathing gases for use in metabolic calculation was established in the early twenty century when the Douglas bag method was introduced.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

This report is written on the assignment by Nexans IKO Sweden AB in Grimsås which is a cable manufacturing company. Nexans IKO Sweden AB was in need of help to examine possibilities for saving energy by saving compressed air, in first place by using the compressed air more efficient. The task was to determine the present situation, making the airwipe stations more efficient by reducing the consumption of the compressed air and in turn save money. Even the aspects of the working environment were discussed as the noise levels from the pneumatic systems and engines are usually high. A schedule over the airflow in the factory and the inventory over current airwipessituation was made.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

An ethnographic study loosely informed by the theoretical framework of distributed cognition was carried out in order to describe how mariners have adopted the Automatic Identification System (AIS) in their work practice, or"made the technology their own". AIS is a transponder-based identification and communication system that allows ships to automatically identify and track each other. In addition to facilitating the identification and tracking of ships, objectives behind the introduction of AIS are to"simplify informational exchange", and"provide additional information to assist situation awareness". Participant observation and interviews were made at four different ships, as well as at two shore stations. A focus group was also held at a maritime conference.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

If you have access to wood, a wood burning boiler is a cheap way to heat your home, but it is certainly not the most convenient option. Wood requires many operations and management, which takes time. One way to reduce this workload is to have a modern boiler with automatic ignition. Enertech/CTC has a desire to create an accessory with automatic ignition to a modern wood burning boiler. Today there is no boiler on the market that can ignite firewood automatically without the introduction of paper and sticks.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.