Sök:

Sökresultat:

532 Uppsatser om Automatic saving - Sida 12 av 36

Utveckling av applikation för android-plattformen : Förenklad medicinering genom ny teknik

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

Avvattning av biologiskt slam

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

Automatisk styrning av växtlampor i växthus

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

Vad är verklig kostnad per koplats? :

Purpose There are almost infinite numbers of ways to build dairy farms in Sweden. When building a new free stall barn you have the possibility to affect both working environment and animal welfare for many years to come. The construction costs are influenced by which type of barn that is built and what functions it contains, for example one can predict that automatic milking systems are more expensive to integrate than milking parlours. But what is the real cost of today for the construction of free stall barns with milking centres and how is it affected by construction methods and functions? Is the labour time influenced by the building costs? These are some of the questions this report will try to answer.

Second City Syndrome - en strategisk läsning av Göteborg

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

Automatisk plastlisthanterare

Today a lot of goods is transported on wood pallets because it?s practical and enabels a fast way to load cargo. The drawbacks with pallets are that they weight a lot, are big and are relatively expensive. Therefore IKEA has developed plastic lists that can replace the europallet in some applications. In this examwork an automatic handling equipment for plastic lists are design from a requirement specification to a finished machine.

Provtryck på skärm

This Degree Project is carried through in association with Fototext in Guthenburg. The firmsees benefits using?Soft Proof? technology for both economic and time-saving. The reasonfor ?Soft Proofing? for internal/ external production is to estimate and controll documentswithout using digital or chemical printing output.The different technical solutions to ?Soft Proof?, knowledges and facts aboutColorManagement together with PDF-workflow is going to pattern for a correct succesfull?Soft Proofing? on the monitor.Acrobat 5 in association with Photoshop 6 are effectively used in ?Soft Proofing? technic.The advance and capacity of the graphical softwares which are explained in this reporthelps the users to begin to experiment with ?Soft Proof?.

Flashback eller Backlash? : En strukturanalys av genusordningen i J.R.R Tolkiens och Peter Jacksons Lord of the Rings

Uppsatsen undersöker fem mäns berättelser kring krigsfilmen Saving Private Ryan, med fokus på maskulinitet. Föreställningarna och bilderna kring maskulinitet som kan urskiljas i intervjupersonernas berättelser, knyts till R.W. Connells teoretiska ramverk kring hegemonisk maskulinitet och de hierarkiska relationerna mellan olika maskuliniteter. Vidare resoneras det kring hur berättelserna exemplifierar en syn på mediepublik som aktiva meningsskapare, då intervjupersonerna tar fasta på olika aspekter i filmen samt ger den olika mening och betydelse. Slutligen belyses hur genus- och andra identiteter är något som kontinuerligt skapas i mötet med en mängd olika diskurser varje dag, samt hur själva handlingen att se på krigsfilm i sig kan ses som konstruerande av maskulinitet..

Crescent evolve - Electric bike for youth

The purpose of the project was to design an electric bicycle to offer thetarget group youth an attractive alternative to mopeds. The basis for theproject was user studies in which young people were interviewed andobserved in their daily environment.The project resulted in a product, designed with the focus of integratingthe battery to the shape, to create a wholeness that is simple andintuitive.!The product is easy to use and operate, with an automatic transmissionengine.! A smart modular system allows the user to choose design withmudguards, rear rack, or without. The battery design is based on "cradleto-cradle" to maximize the battery life and minimize environmentalimpacts.It was very fun and rewarding to have the opportunity to present theresults for the youth who showed great interest in the product.The project was conducted in collaboration with Designit and Cycleurope..

Utveckling av virtuella världen "Krimlab" - Spelbaserat lärande för tonåringar

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

Kommunikation med drivlina : Implementering av seriell kommunikation och LabView-gra?nssnitt fo?r DSPer i drivlina

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

Visualisering och beräkning av hudkapillärer

The aim of this thesis was to develop an objective and automatic method for identifying capillaries in microscope images of the skin. Furthermore, statistical data about the identified capillaries and the capillary distribution should be computed and stored in a database. The method was implemented using the platform independent programming language Java. An analysis of microscope improvement using various polarization filter setups and wavelength filtershas also been performed, as well as a pilot study of the effect of applying a local anaesthetic cream on the skin. The method is developed and aimed at research on various pathological skin conditions affecting the capillary distribution.

"No one leaves behind"

?No one leaves behind? är en uppsats som diskuterar vilka berättarstrukturer och ideologier som kan urskiljas i de amerikanska krigsfilmerna Behind Enemy Lines (2001), Black Hawk Down (2001), We Were Soldiers (2001) och Saving Private Ryan (1998), med hjälp av teoretiska metoder från strukturalismen och teoretikern John Fiske. Dessutom behandlas även begreppet nationell identitet för att undersöka om man kan se någon tendens till nationella identiteter i de amerikanska krigsfilmerna. Slutsatsen är att filmerna har en gemensam berättarstruktur och gemensamma teman som är viktiga för de ideologiska tankar och värderingar som kan urskiljas i filmerna. Teman såsom ära, mod och heder, det manliga förhållandet som i uppsatsen benämns brödraskap, och dessutom temat No one leaves behind vilket är mycket centralt i en del av filmerna. Ingen av soldaterna i filmerna skall lämnas kvar i en krigszon, levande eller död..

Skjuvhållfasthet och deformationsegenskaper för Uppsalalera med CRS och standardödometer

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

Utveckling av reglersystem till quadrokopter

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

<- Föregående sida 12 Nästa sida ->