The choice of harvest date for leys is one of the most important factors affecting the size and quality of the harvest. An early harvest gives a high nutritive value while a late harvest gives larger quantity. Today?s aim to produce high nutritive leys gives early harvest dates both in primary growth and regrowth in northern part of Sweden. The consequence is a growth in the autumn, a "third harvest".The aim of this master thesis was to study the effects of different harvesting systems and their effect on size, feed quality, wintering and economy for conditions in the northern part of Sweden.

BackgroundDiathermy is the most commonly used surgical instrument in the surgical area today. Diathermy is used in surgery to cut and coagulate tissue. The use of diathermy releases chemical substances in to the environment in the form of diathermy smoke. Research shows that these chemical substances pose health risks to both staff and patient exposed to the smoke. To protect the interdisciplinary, perioperative team from the smoke, smoke evacuation systems can be used.ObjectiveThe purpose of the study is to highlight the work environment of the perioperative team when working with diathermy smoke.MethodThe study is meant to be implemented as an empirical descriptive sample survey.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

The use of ERP in organisations is very popular and many companies have embraced this paradigm without really questioning why. Problems therefore often arise and cause high costs which is a result of poor planning. The paradigm also has its origin in the traditional architectural design that creates a system that has difficulties to adapt to organizations that are constantly evolving. The purpose of this study is to provide a different view of how IT-systems can operate within an organization and show how standard systems can be structured. We emanated from a case study at Linköping University Library, where we studied the implementation and integration of a standard system called Symphony.

The scope of this master´s thesis is the issue of usability in relation to interface design,in particular the interface of a university library´s online public accessed catalogue, orOPAC. Since the OPAC can be seen as the library´s ?shop window? to the world, it isof great importance that the interface to the OPAC can be used by patrons witheffectiveness, efficiency and satisfaction.The master´s thesis is based on a qualitative study performed at Karolinska InstitutetsUniversity library, and contains both a usability evaluation and an interview study. Twointerfaces were evaluated: a standard web interface provided by the system supplier, andan interface developed in-house by Karolinska Institutet´s systems department. The twointerfaces are both connected to the same online library catalogue, thus making possiblea comparative study..

One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

A description and analysis of the sales process of ERP systems is presented; also the consequences for the parties involved are discussed. The chosen methodological basis is an inductive research design consisting of a case study based on interviews. The analysis of the empirical data is done with a proposed analytical framework. Based on the agency theory, the analysis is tightly knitted together with opportunism. There are three controlling factors: relationships (relationship marketing), contracts (principal-agent theory), and competition.

Företaget Radius Control Systems AB sysslar huvudsakligen med utveckling och underhåll av SCADA applikationer. Radius hade önskemål om att kunna visa väderinformation från en väderstation i Radius egna övervakningssystem Uni-View. Detta skulle ske via ABB: s styrsystem AC 800M/ 800xA, med en PM856 processor. Arbetet handlar om att upprätta kommunikation mellan en PLC och väderstation, och från PLC vidare upp till Uni-View. Rapporten behandlar hela arbetsprocessen med början från en prototyp till ett fungerande system.

This thesis examines if commercial-of-the-shelf (COTS) systems meet the needs in different types of organizations. This was investigated through a case study of a COTS system. The system is built for contact centers and used in different types of organizations. Contextual inquiries with users from six different organizations were held together with interviews with stakeholders of the system. This gave an understanding for how the system is used and the needs to be met in the different organizations were recognized.

Pharmaceuticals are environmental pollutants that are a major threat to aquatic ecosystems and very little is known about their ecological consequences. In this study growth, survival and behaviour (sociability, activity and boldness) of perch fry (Perca fluviatilis) were examined in order to study the possible effects of exposure to a benzodiazepine anxiolytic drug, Oxazepam, during embryonic development. The study tested following hypotheses: (1) perch growth is affected positively by exposure during embryonic development; (2) early perch survival is affected positively by exposure during embryonic development; and (3) boldness and activity increases while sociability decreases in perch fry exposed during embryonic development. Embryos of naturally spawned perch were exposed to water with two different concentrations of Oxazepam. The embryos were exposed during different parts (24-hour periods) of the embryonic development, because embryos may be more vulnerable at certain times during embryonic development and/or because the exposure at different times can produce different effects.

The purpose of this study was to illustrate how professionals, who work with psychosocialproblems among children, look at the impact of social factors on behavior that causes ADHDdiagnosis and at the relationship between social factors and the increased diagnosis that hasoccurred in recent years. To answer our purpose, we chose a qualitative approach byinterviewing six professionals who had different professional affiliations. We analyzed theresults using systems theory and attachment theory. The results showed that the professionalssaw various social factors that influenced the behaviors that cause ADHD diagnosis, particularlytroublesome growing environment and the school environment that requires greater cognitiveability and social skills of children today. They also saw that social factors could have an impacton the increase of diagnoses, particularly that the diagnosis can result in that the understandingchanges and that it is considered easier to get extra support at school with a diagnosis..

Skärgårdsstiftelsen, which is responsible for several of the archipelago islands in Stockholm, has chosen to explore the possibilities for more sustainable heating systems in buildings on the islands in collaboration with KTH. A reduction of energy use and improving the efficiency of existing heating systems are included as part of the environmental work. This report studies the island of Grinda, which is located outside the area of Vaxholm in Stockholm. The study area consists of a guesthouse consisting of a restaurant as well as conference facilities and four neighboring cottages used for overnighting. The cottages now run solely on direct electricity, both for heating and hot water.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

Holmen Skog is currently using a GPS-program called TraktInfo, originally developed within the company. They are now planning to switch to a new GPSprogram or allowing the contractors to buy other programs available from the logging equipment manufacturers. To be able to offer this flexibility, Holmen Skog needs to obtain information about the features offered by the different manufacturers in their specific programs, and also when the manufacturers are planning to start selling programs adapted to the new standard called StanFord2010. According to the study, the manufacturers are hesitant to StanFord2010 and there has also been a lack of clear signals from the customers and clients about what kind of different new features to include in the programs. The feature most frequently used by forest machine operators today is the option to keep record of the harvester?s path by creating a ?log plot?. This feature was not used to its full potential however, since only one out of eight of the forwarders included in the study had computers that were compatible with the harvester?s computer.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.