The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

With the advance in computer and network technologies, multimedia systems and Internet applications are becoming more popular. As broadband network is prevailing, more clients are able to watch streaming videos or to play multimedia data over the Internet in real-time. Consequently, there is an increasing demand in the Internet for streaming video systems. As the run-time environment of such applications tends to be dynamic, it is imperative to handle transient overloads effectively. The goal of this work is to develop an algorithm that would provide a robust and controlled behavior of the video system so that important data is delivered on time to the video clients.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Handling materials and packaging, which is the focus of this study, requires efficient logistics, both internally and between companies. To achieve an efficient material flow, good information systems, whose role is to collect, store, process and distribute information, are required. The assumption that packagings are handled in an efficient manner is currently not a matter of course, when many companies do not prioritize the internal management of the package.The purpose of this report was to investigate how medium-sized businesses working with distribution and handling of spare parts packaging can improve their internal management of packaging. In order to answer the purpose, we have used an abductive process and a qualitative data collection. The study had Logistic Center Ljungby (LCL) at Electrolux Laundry Systems (ELS) as a case company and two other respondents, Nibe in Markaryd and Enertech in Ljungby.

Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

Blekinge Hospital suffers from a budget shortage of 100 million SEK, while the government now requires that hospitals will no longer be running a deficit. Blekinge Hospital will then use their limited resources to survive in the future and the activity must be enhanced in order to keep costs low without having to lay off personnel. The idea is that the organisation should be more efficient with a more efficient resource usage. Performance measurement systems are important tools for achieving the policies set out within an organization, measuring and evaluating performance is a way to see where improvements in efficiency may be necessary in the business. Balanced Scorecard (BSC) is one of several measuring systems, where the focus is on measuring non-financial performances.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

This thesis investigates in which way principles and theories of usability is revelant when evaluating interactive systems for children aged 10-12. It also investigates whether there are specific factors that you should keep in mind while developing interactive products for the targeted group.The results of the qualitative study shows that priciples and theories of usability is relevant when evaluating interactive systems for the targeted group. However there is one concept that is more significant than the others. Our study shows that our targeted group is sensitive to time-consuming activities such as loading times etc. which has to do with the efficiency of the system.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

Article 4.1(h) in the Rome I regulation establishes which law that will be applicable on contracts concerning financial instruments concluded in multilateral systems. The main problem is that most contracts concluded within these systems have standard clauses which contain a clause on the applicable law. If this is the case, Article 3.1 in the Rome I Regulation is applicable instead. This problem makes it difficult to find a need for article 4.1(h) if it will only be applicable in exceptional cases. However, the legal position on this matter is still unclear since the Rome I Regulation has just been put into force.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

This bachelor thesis in science Informatics contains the qualifications for the applying of IT in education for students in elementary school, grade 1-3. By empirical case study on an existing elementary school, whose success on IT use is noticed, describes how to apply IT in the classroom in an adequate way. We look at different theoretical frameworks in interaction and design of systems designed for learning purposes, and satisfies their specific needs and situations within the classroom's four walls. The current lack of statistical measurements on students' results and effects of the use of IT in teaching, prevents further improvements. If we simultaneously work to develop more well-designed systems that are designed for this purpose, it is possible that the effects become more and better.