The purpose of this dissertation is to describe small businesses? opinions about the auditor as a business adviser as well as their need for advice, dependent on which stage of the lifecycle model they belong to. This dissertation has a qualitative approach as the authors wanted to gain a deeper understanding about the problem area. As the lifecycle model in this dissertation consist of three stages, the authors have interviewed six small businesses, two in each stage. The interviews were conducted with the owner and took place at the location of the business.

SELF CONTROL är ett undersökande examensarbete i textildesign. Med en textil hantverksmetod undersöker jag mötet mellan kontroll, tidsåtgång och material. Detta med utgångspunkt i en feministisk diskurs. Jag ser kontroll som något som exkluderar, censurerar och begränsar möjliga uttryck inom textilt hantverk på samma sätt som kvinnokroppen kontrolleras i ett patriarkat. Jag har använt mig utav en performativ och repetitiv metod som aktivt har gått ut på att bryta mot föreställningar om hur hantverket ska utföras.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

This study investigates the corporate sustainability activity, linked to the company's core business, which is a relatively unexplored field in a Swedish context. The study examines how the organization has used management control for its sustainability activity within two social initiatives; and whether these initiatives have generated value for the organization and involved stakeholders. Management control of social initiatives are examined within the theoretical framework of The Sustainable Balanced Scorecard and the organization's value creation contributions are outlined in accordance with a definition of the concept of Creating Shared Value. The method used for the implementation of the study is a qualitative study, embodied in an illustrative case study of a large Swedish company operating within financial sector. The empirical data was collected through 12 in-depth interviews with representative interviewees within the organization and with other stakeholders involved in the company's social initiatives.

The aim of this study was to gain insight into how two enterprises work with competence development and thereby study how the relationship between competence development and workers, employees, look like. The focus was on the workers motives and motivation towards a participation in a competence development course, their attitude to education, and how the transfer of skills gained from the course, into the workplace looks like. Further on, the work situations influence on the workers competence development has been taken into account.In the study, six people were interviewed in the role of either manager, coach or course participant who are employed in two different enterprises in the south of Sweden.The results showed that the participants were motivated by a strive for personal development or that the participants viewed education implementation as a part of the professionalcareer, which has resulted in a positive attitude towards the competence development course. The managers? motive for decisions about education was to change the prevailing attitude among the staff for the better and thereby strengthen the company?s brand. The work situation has encouraged the desire to participate in developmental education as the feeling of control has encouraged the workers to further development.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

This study focuses on the internal marketing and how it affects the complaints by companies? communication control. Our purpose with this subject is to increase the understanding of which components affects the relation between internal marketing, communication control and complaints. We have chosen the subject, internal marketing because it caught our interest in an earlier course. On the basis of the literature of costumer complaint there have not been so much research about it and that is why we have chosen this perspective on internal marketing.This study is based on a qualitative approach.

According to the basic values of the Swedish Trotting Association the horse and its welfare should always be held in highest consideration. One part of the animal welfare work in the organization is to ensure good horse management practices by controlling all active trainers through the local licensing committees situated at the Swedish racetracks. The Swedish Board of Agriculture stated that high quality animal welfare assurance programs used by the industry organizations can be used in the risk assessment of the official animal welfare control to make the official control work more effective and the ambition of the Swedish Trotting Association is to establish an animal welfare assurance program which may be approved by the Swedish Board of Agriculture. Racehorses are exposed to welfare hazards both in their management as well as during training and racing and factors like handling, training, feedstuff, stable environment, medication and the possibility to express natural behavior all affect the welfare of the horses. The aim of the project is to investigate and evaluate the animal welfare work performed by the licensing committees and to give advice on how to improve the industry?s animal welfare control.

Detta arbete syftar huvudsakligen till att bidra med rekommendationer för hur ett system för mätning av kvalitetsbristkostnader hos ABB-enheten Control products Sweden bör upprättas. ABB:s globala riktlinjer för vad som ska mätas i ett sådant system har fungerat som utgångspunkt. I rapporten diskuteras vidare hur arbetet med mätsystemet ska upprätthållas utifrån ett ledarskapsperspektiv. I studien har en litteraturstudie legat till grund för en nulägesbeskrivning, en benchmarkingstudie, deltagande observationer och intervjuer. Rapporten innehåller också en sällsynt detaljerat beskriven kvalitetsbristkostnadsmätning som fungerar som riktmärke för enhetens fortsatta arbete med kvalitetsbristkostnader..

For many providers of ERP-system, Poland is one of the most valuable markets in Central andEastern Europe. The Polish market for ERP-systems is still a growing market, especially; wecan see the low utilization of ERP-systems among small and medium-sized enterprises. Thisis due to several factors, primarily the cost of implementing the system and the necessary infrastructure.Subsequently due to the lack of knowledge, where there is no sufficientknowledge of the benefits arising from the use of an ERP-system in their business, and thereis a fear within the companies that its business would start stagnating.This paper investigates the implementation process of a Polish consulting company whichworks towards small and medium-sized businesses. The key success factors will be studied inthe implementation of ERP-systems, and the instance factors of the interrelationship betweenthe consultant and client from a consultant perspective. The review of the literature has beenidentified and discussed in relevance to the empirical study.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

The aim of the study has been to gain an increased understanding of the sense of participation and influence that the enrolled nurses, working with home-help services within the purchaser ? provider model, feel and how this participation and influence affect them. Five enrolled nurses in three of Stockholm's districts related their experiences of participation and influence at work in the qualitative interviews that were conducted. The result was then analyzed with the help of two theories, Karasek's and Theorell´s Demand- Control Model and Antonovsky's theory regarding ?a Sense of Coherence (SOC)?.

This report is part of the major thesis carried out at Stoneridge Electronics in Bromma,Stockholm during autumn and winter 2005-2006. The background to the thesis is the trendwithin the automotive industry where color displays have become more common for presentationof information to the driver, a trend that has come to the commercial vehicle market. Thepurpose of the thesis has been to evaluate whether programmable logic, with respect to FPGAtechnology, could be suitable for display control and graphics generation of these more complexcolor displays in automotive environment.Within the scope of the thesis the FPGA technology has been investigated, i.e. whatopportunities and threats there are with aspect to environmental and security requirements. Inaddition, the market of FPGAs and pre-built IP-cores has been investigated.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes that is needed to manufacture a product from origin to consumption. Globalization, technology and increasing time and quality-based competition are all driving forces behind the concept and reasons for an increasing interest in supply chain management.The purpose of this essay is to by using a qualitative case study examine which decisive success factors that can be identified for effective supply chain management. We have compiled different theories on the subject to use for analyzing a case study Li & Fung, who is a successful supply chain management company.