AbstractBachelor thesis in political science by Alexander Hassan, autumn 2008, ?Effects of external factors on a nations democratisation process during the transition from authoritarian to electoral democratic rule ? A categorical analysis?Supervisor: Tomas SedeliusIn recent years globalization has become a hot topic in understanding the world we live in today. Globalization has indeed had a great impact on international relations and with it a great influence on the domestic conditions that determine a nation?s possibilities. It is therefore rational to hold true that this also would apply to a nation?s democratic process.

The voltage level in the power grid varies due to variations in load and production. Normally these variations are manageable, but they may be excessively large during a disturbance. If the voltage is too high it may damage the equipment in the grid and too low voltages may cause problems like voltage instability. The magnitude of the voltage variation depends on the short circuit power capacity of the point of interest.This problem may become lore prominent due to automatic voltage regulation that acts on shunt reactors and shunt capacitors. When the shunt reactor is connected or disconnected to the grid it may cause such large changes in the voltage that the shunt reactor starts hunting.

The purpose of this study is to develop and practically evaluate a new approach for the introduction of changes in internal and external processes in a customer front, but with the aim of maintaining or increasing customer perceived quality during insertion. A working model has been developed and is used in a qualitative research in the form of a case study carried out in a customer front, on a customer group in Telia's mobile customer service in Sweden. There is currently little research that has studied the implementation phase.The results of the study show that the designed working model works satisfactorily, but also that it can be developed more. Employees are satisfied and the sale was a positive boost, however, declined the customer experience a little bit. Employees raises questions as leader behavior, confidence in the group ahead, everyone's different circumstances and desire for the individual choice.The biggest challenge for future leaders will be to manage and lead continuous change.

The high incidence of cranial cruciate ligament injury in dogs results in both suffering and significant costs due to treatment and care of affected dogs. Today there are several different technics for surgical treatment in dogs with ruptured cranial cruciate ligament. At University Animal Hospital (UDS), SLU, in Uppsala two fundamentally different methods; TPLO (Tibial Plateau Leveling Osteotomy) and external fixation with suture material are practiced. The aim of this study was to estimate if the different surgery technics result in any difference regarding the function of the dog in a long term perspective. Since motion and function are very affected by arthritis, was the purpose also to determine if there are any differences in developing arthritis between dogs surgical treated with external fixation respectively with TPLO. Development of arthritis is common after surgery or traumatic injuries in a joint, such as cruciate ligament rupture. Unfortunately was the number of dogs in the study to small to achieve two comparable groups.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

An evaluation: how have the goals of ?Vårdkedjeprojektet? been implemented at the treatment centre of RällsögårdenThis evaluation was commissioned on behalf of the treatment centre of Rällsögården. The aim of this study is to evaluate how the goals of ?Vårdkedjeprojektet? (VKP) have been implemented in the institutional care at the treatment centre of Rällsögården. This study was focused on the following questions: a) how is the function ?internal coordinator? experienced by staff at Rällsögården, b) in the function of internal coordinator what aspects are thought of as effective/non-effective concerning the cooperation with ?external coordinators? and contact with clients and staff, c) how is Vårdkedjeprojektet and its treatment approach ?Community Reinforcement Approach? (CRA) experienced by coordinators, clients and staff and d) how well is the aftercare functioning for clients who have finished their treatment at Rällsögården, and still participate in VKP?The choice of research method was triangulation; a combination of qualitative and quantitative methods.

The municipality, of Gatukontoret in Local government of Borås has in the long run, a required need to look after the current heating devices (the gas production plant) in sewage treatment plant, called Gässlösa. The practical work of the examination is about, trying to find a better way to take care of the current heat recovery. That may be one way or another, rather easy to implement in the existent construction.Through the work to increase the efficiency of the gas engine, implement of some external cooling system by heating exchange device. That gives an opportunity to heat (primary) the digester, (but even all internal public areas) with its own superfluous heating.The report shows that if the management group may invest 422 704 crown to implement a heat exchanging device, it gives more space to reduce the need to buy expensive external energy. Gatukontoret´s pay off time, for buying machines, is 20 years, with reservation to calculate with 4 percent internal interest, leads to the yearly mount of 31103 crowns.If Gässlösa increases the gas engine time in (effective) duty approximately (correspondingly) 48 hours a month the entire investment will generate a profit in January in year seven after the implementations.

This report is the result of a thesis as been implemented during the spring term 2009 atthe University of Gävle.The company Bruks produces mobile chippers which are used for chipping loggingslash, roundwood and parts of trees. The chipper is powered by a separate diesel engineand the chipper can be assembled on trucks, trailers or some other carrier vehicles.When the chip has passed the chipper drum, the chip is collected in an integrated binwhich is mounted on the vehicles frame with dumping yokes. When these dumpingyokes were designed they were probably created with large material dimensions. Theaim with the degree project is hence to study the strengths of materials and, if possible,to suggest an arrangement that can decrease the total weight on the dumping yoke onBruks´ mobile chippers 805 CT.The CAD-program Pro/ENGINEER was used during the project for outlining the 2Ddrawings,as distributed of constructors on Bruks, to solid 3D-parts. The three-dimensionalassembly from Pro/ENGINEER was transferred to Pro/MECHANICA.

För många verksamheters långsiktiga överlevnad, är det av stor vikt att kunna göra korrekta analyser för att därigenom också kunna fatta bra beslut. Till sådana analyser krävs data av olika slag. Sådana data kan komma från källor inom verksamheten (interna), men många gånger kan data från källor utanför verksamheten (externa) också bidra med värdefull omvärldsinformation. Dataunderlaget till analyserna kan med fördel inkorporeras i ett Data Warehouse (DW), vilket ger möjlighet att använda informationen på ett strukturerat sätt inom ramen för någon form av Business Intelligence (BI)-lösning.Processen att inkorporera data från olika källor till ett DW kan vara komplex - i synnerhet då externa datakällor används. Ett ramverk har tidigare tagits fram i syfte att fungera som stöd vid en inkorporering.

The following thesis is examining compliance with EU-law from a member state perspective. The variation in the compliance level between the member states from 1995 to 2005 is analyzed to prove the fact that the Nordic member countries during the measured time period experienced a low number of infringements. The infringements that did occur were resolved faster and more efficient in the Nordic countries then in the other member states. The theory used to explain the Nordic compliance rate is divided between external and internal pressure in a pull and push model. The external pressure is illustrated with argumentative persuasion from the EU-commission to the individual member states; how the state responds to the persuasion in order to act compliant.

Business and organizations use computer network in a greater extension than ever before, especially for business-critical use. That increase the demand of security for all systems, both against internal and external threats. The demand on the authentication method used today increases. Today they normally uses password or some kind of smart card. I will performa literature study that will investigate the possibility to increase the security in authentication of users without the use of extra hardware.

In the United States, see recommendations for cardiac safety of sports arenas but also to health and fitness facilities. However, this does not exist in Sweden today. Objective: The purpose of this study is to identify the health- and fitness facilities today are equipped with respect to cardiac safety and specifically relating to preparedness for cardiac arrest. Method: Quantitative data are collected and compiled with the help of a questionnaire. The questionnaire contained 19 questions in total.

Our purpose is to report on a few of the internal and external factors that influence a person to choose and dare to start his own company, instead of being employed. We would also like to get an insight on what is of strong importance when you establish a new company. This will be done with a theoretical and empirical study..

The purpose with this essay is to study the public support givers view of the concept innovation and to study how the public support givers discuss and act around the division of public support to entrepreneurs innovations. The purpose is further to describe if the division of public support favour or not favour environmental innovations and to examine if the public support givers consider the industry for environmental innovations is profitable for the society?s economy.We have done several case studies where we have interviewed eight public support. Support givers in this essay are defined as public authorities and other organisations on local, national and/or international level that gives public support to innovations. The public support givers that take part of the essay is VINNOVA, ALMI Stockholm, Innovationsbron, Energimyndigheten, SU Holding AB, KTH Holding, Västra Götalandsregionen and MISTRA.Our theoretical starting point is Silverman and Baums theory ?Picking Winners or Building Them?.

The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..