In order to reduce the price for, and improve the performance of automatic control systems for magnetization of synchronus generators, the possibilities of using a PC based software PLC system, Programmable Logic Controller, has been investigated. The result is a system based on the CoDeSys software PLC with runtime environment from 3S-Software, communicating with external units via Modbus fieldbus. System price is reduced from ?5000 to ?2000 and system processing speed is reduced from 10 ms for a Siemens S7 PLC to 4 ms with the CoDeSys PLC system though unsolved problems with runtime seizure caused by improper settings in the PC BIOS..

This paper investigates the automatic stabilizer and the underlying factors behind its function. The paper includes both a literature review and an empirical analysis. The literature review discusses the IS-LM and Mundell-Fleming models and different ways to quantify the automatic stabilizer. Based on the theory, the relationship between volatility in GDP and the size of the automatic stabilizers is then analyzed with the help of regressions. Our main result shows a negative relation between these two variables.

Using the models from van Maanen and Schein (1977) and Dutton et al. (1994), we have been able to investigate the socialization process and organizational identification both from the organizational as well as the individual?s perspective. The link between these two perspectives establishes a better insight into the company?s actual socialization intentions and the individual?s identification with the firm.

Automatic milking systems (AMS) are part of a growing trend in Sweden and the number of milk-producing farms is decreasing rapidly. One main reason for the AMS is its ability to facilitate work for the farmer. The effects of introduction prior to calving have not been documented earlier and farmers are not in agreement, however they seldom see a problem with the introduction. The aim of this report is to find differences between two groups of heifers, where one group is trained i.e. introduced to the AMS before calving and the other group is introduced after calving.

The purpose with this study was to investigate how the behaviour and physiological parameters differ between high ranked and low ranked cows, and between cows in an automatic milking system verses conventional milking parlour. The study was carried out at the Kungsängen research Centre, Department of animal nutrition an management, Swedish University of Agriculture Sciences, Uppsala. Twelve cows, the six highest and the six lowest in social rank were selected from the automatic milking system for the experiment. Ten cows, the five highest and five lowest in social rank were selected from the conventional system. Blood samples were taken during milking and resting.

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

This thesis describes new methods for automatic crack detection in pavements. Cracks in pavements can be used as an early indication for the need of reparation.Automatic crack detection is preferable compared to manual inventory; the repeatability can be better, the inventory can be done at a higher speed and can be done without interruption of the traffic.The automatic and semi-automatic crack detection systems that exist today use Image Analysis methods. There are today powerful methods available in the area of Computer Vision. These methods work in higher dimensions with greater complexity and generate measures of local signal properties, while Image Analyses methods for crack detection use morphological operations on binary images.Methods for digitalizing video data on VHS-cassettes and stitching images from nearby frames have been developed.Four methods for crack detection have been evaluated, and two of them have been used to form a crack detection and classification program implemented in the calculation program Matlab.One image set was used during the implementation and another image set was used for validation. The crack detection system did perform correct detection on 99.2 percent when analysing the images which were used during implementation.

The purpose with this masters thesis was to model the scanner in a system for laser bathymetry. The model was then used to develop a controller for the scanner so a good search pattern was achieved. Two different types of models have been tested, a physical model and a Black Box model of Box Jenkins type. The physical model has been derived from Lagranges equations. Identification experiments have been used to compute the Black Box model and to find the unknown parameters in the physical model.

The use of environmental management systems, and objectives-led corporate management have become a widespread phenomenon today. Identification and assessment of an organisation?s significant (environmental) aspects is crucial within this work. Identification and especially assessment of significant aspects is often considered as a problematic step in many organisations. There are no generally accepted methods how to undertake this crucial step.

In information retrieval there is a problem with ambiguous words. To solve this problem word sense disambiguation WSD is used. Few studies combining information retrieval and word sense disambiguation have been conducted with Swedish words. The purpose of this thesis has been divided in two. The first purpose was to examine Swedish information retrieval and disambiguation in the query phase.

Auditors have a big role in society. The question of auditor independence has been debated frequently after the financial crisis. Long auditor tenure with clients has both advantages and disadvantages so the question is hard to solve.One of the traits that are encouraged with auditors is professional skepticism. An important part of professional skepticism is the personal skepticism of the auditor. The purpose of this dissertation is to investigate if a high professional skepticism can increase auditor independence by increasing profession identification and decreasing client identification.

The web has made an incredible amount of unorganized information available to anyone. There are search engines that help us structuring the information, but it is still difficult to find what you search for on the web. The purpose of this master's thesis is to investigate whether the already existing techniques for automatic indexing are suited for the new information retrieval context on the web and how the choice to support these techniques, or not, affects the search results. This is examined through a literature study on automatic indexing and other related concepts, such as information retrieval and information searching on the web in order to get a theoretical frame to the work and by an observation of the search engine HotBot to approach the purpose of the thesis. The observation is carried out by searching HotBot's database and investigating the search results in order to try to identify patterns that can reveal something about how HotBot's automatic indexing is done.

Automatic trimmerhead is an examination project for making an automatic trimmerhead for grass trimmers with the user and functionality in focus. Our perception is that a happy user is a user who can pick up his or her trimmer, use it and put it back to its place when the job is done. It should not be necessary to interrupt work and perform maintenance on the machine just to make it work as promised.The project has been made in collaboration with the company Husqvarna, which is one of the biggest actors dealing with garden machinery on the market. Together we determined the project goal, ?To invent, construct and test a brand new concept for how an automatic trimmerhead can look and function?.At this day there are several different automatic trimmerheads on the market, both semi and fully automatic.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.