This study was carried out at the request of the bio energy company Naturbränsle. The company handles annually 750 000 m3 of chips from logging residues from a large area, from Östergötland in the south to Härjedalen in the north. In that area, about 50 bio fuel plants are customers. When Naturbränsle deliver chips from logging residues to their customers, the moisture content varies from 30 % to 60 %. The aim of the study was to sort out the affecting factors on the moisture content in the chips during handling and storage processes.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

Cattle production systems are changing to bigger intensified systems with larger numbers of animals per farm and more free range systems while at the same time employing fewer people. Aversive handling has been known to affect cattle production negatively for many years, but lately scientists have started to focus more on what positive effects gentle handling and positive human-cattle interactions may have on beef and dairy production. Fear can cause high stress in production animals and this can contribute to not only reduced production within beef and dairy cattle, but also increased risks for accidents and decreased animal welfare. Therefore, by reducing the fear cattle experience of humans, it could be possible to increase production, decrease accidents and increase the welfare of the animals. Reducing the animals fear and stress can be done by simple means, such as walking and talking calmly around the cattle, associating humans to positive feelings (such as feed) and stroking the cattle?s body regions associated with social grooming.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

Background: Due to outsourcing, the material flows in the telecom equipment industry have undergone major changes, which in turn has imposed new challenges for packaging supplier Nefab who delivers to the industry. In order to achieve market intelligence, Nefab wants to map the material flows, and investigate possibilities of further reusable logistical packaging systems.Purpose: The purpose of this thesis is to describe the typical features of the logistical material flows in a technically based, rapidly growing industry, and analyze the driving forces and obstacles, which influence the selection of logistical packaging system. Procedure: After developing a theoretical framework consisting of general logistical theories and theories related to logistical packaging, we have interviewed companies in the logistics channel of Ericsson Radio Systems.Results: We have found the main characteristics of material flows in our investigated industry to be Variations in Demand, Focus on Time-to-Customer, and Globalization of Logistics Channels. Regarding driving forces and obstacles in the selection of logistical packaging systems, we have identified Transportation Characteristics, Customer Demands, Quality, Handling & Administration, and Current Packaging System as important factors..

Food insecurity is a great problem worldwide and Ethiopia is one of the sub-saharan countries that are suffering from poverty and food insecurity and a large part of the population are living in a state of undernourishment. To reduce these problems, a successful horticulture production can be an important factor. Compared to other crops, fruit production in Ethiopia has not been a large part of the agricultural sector. However, the demand on the domestic market is increasing as well as the production for avocado and mango. To increase food security it is important to focus on ways to decrease post-harvest losses of food products and not only have the productivity of agriculture in focus.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The combustion engines in today?s vehicles are getting more and more advanced and there are increasing demands on that the engines should operate during optimal conditions. Examples of internal combustion engine parameters which may be carefully controlled are the rate between fuel and air, that this gas mixture is homogenous enough and that it is ignited at the correct moment. Moreover, the requirements of these parameters vary depending on, among other, engine speed and load. To meet these requirements in all occurring operation conditions, it is required that many subsystems work together.

The purpose of this master?s thesis is to contribute to the development of business relationships between a supplier and its customers. The research area and research problem was further developed into three research questions. The research questions concerns the following subjects: the substance of business relationships and dimensions within relationships management that can be used in order to contribute to the development of a company?s business relationships.

Agriculture has to be performed in a sustainable way in order to sustain high yields and to support a globally growing population. Functional soil properties are fundamental for high yields and in order to achieve good soil conditions sustainable management is a key. Loss of soil organic material and increased soil acidity are problems associated with degradation of soils and hence less sustainable agriculture. In this thesis, the effect of different agricultural systems on soil organic matter, pH and yield was examined. The systems examined are a cereal system with straw removal or returning and a ley system, all with different nitrogen levels.

To produce milk of good standard the feed for the animals kept for milk production is an important part in the work of quality. This makes it important to feed them with good forage, especially when feeding with silage. The process of making silage is very complex and requires a careful handling to be successful. The fundamental idea is to create an anaerobic environment in the herbage to favour the desirable micro-organisms, in this case the lactic acid bacteria. This environment is created by careful handlings were the importance is to pack the crop well and cover it as soon as possible to exclude oxygen.

AbstractWe live in a world today that is characterized by the Internet. We can get hold of people on the other side of the globe whenever we want and we can purchase what ever we want, from who ever we want, anytime we want. This development has made it important to find systems of dealing with the payment in a safe and secure way, both for a private person as well as for a company, when you do transactions with people far away, and those systems is the core of this essay. As a private person you sometimes need to transfer money to family members who live abroad and you can then use clean payments. This means that banks all over the world has systems which makes it easier when their customs wishes to transfer money abroad.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

Title: A hosting service for software development projects that use the Git revision control system. To learn using tools to make software development more effective should be self-evident at a high level institution as the competitive industry races on. The absence of directives for programming students in Sweden to use source code management (SCM) was the basis for this report. The report describing the developing of a hosting service for software development to use SCM of Git, which includes a web application, storage, API and authentication of students. The project resulted in a hosting service and a smaller survey of how the today Swedish students using habits of SCM during their studies..

Developments in milk production are heading towards fewer but larger herds where the milking process is often fully automated. Automatic milking systems were launched in the 1990?s and in the year 2010 the Automatic Milking Rotary (AMR) was introduced. As a rule there are no supervision personnel present during the milking event in systems with automatic milking. This means that there is a risk that cows can be incompletely milked in one or more udder quarters, for example if the robots fail in attaching the milking cups or if the cow kicks off the milking unit.