Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

Knowledge is today one of the most important resources for an organization to handle. But knowledge can also be difficult for organizations to manage. The internet is still growing and new tools take form that allows users to effectively share information. The purpose of this report was to describe how organizations can make use out of internal social media to facilitate knowledge management processes. Three issues involving mapping, coding and dissemination of knowledge to were produced to answer the thesis. The study was limited to examining the identification, coding and dissemination of knowledge through the internal social media plattformen, IBM Connections. The theoretical framework emphasizes how social networks can promote knowledge sharing, how a knowledge mapping can promote knowledge dissemination and sharing, how knowledge can be stored in data sources and how important interaction is to spread awareness. The theory has been supplemented by descriptions of how the system IBM Connections works. Surveys were conducted on four companies that use IBM Connections as an internal communication plattformen. The four companies were selected to illustrate how they use the plattformen of knowledge management processes and we chose to interview the people who were responsible for the introduction of the plattformen. The study identified several similarities between the different companies and that although there were some technical and cultural recalcitrant units against this new type of system within the organization so favored IBM Connections knowledge in several ways. The built-in search automatic created a map of knowledge through the plattform's user profiles. Saved files and documents could be found even after the employees left the company, which encodes knowledge into the company knowledge resources. The opportunity to interact with one another, often over great distances, favored the sharing of knowledge. A comparison with the theoretical framework provided us with the conclusion that internal social media can be used in several ways to Knowledge management through automated knowledge maps, the ability to store knowledge within the company and to communicate knowledge across functional and geographical boundaries in interactive discussions..

This study is a degree project in environmental engineering at Mälardalens university. Its purpose has been to perform a risk assessment on whether or not any contaminations are present in the soil at two properties in Köping. The assessment was to be done accordingly to a method that has been set up by The Swedish Environmental Protection Agency (Naturvårdsverket). The method for investigation of contaminated sites is called MIFO. MIFO consists of two stages.

Syftet med denna uppsats är att utifrån ett demonstratorperspektiv föreslå vilken typ av lvrobotsystem som skall vara lvrobotdemonstrator 2010. Metoden som används är att beskriva olika myndigheters uppfattning om demonstrator, den hotbild från luftmål som är aktuell 2010-2020, de aktuella svenska lvrobotsystemen och de uppgifter som FM anser att dessa skall lösa samt teknikutveckling för lvrobotar. En analys av underlaget ger mer konkreta syften och nivåer på demonstratorer, en jämförelse mellan hot och lvrobotsystemens förmåga visar vilka förmågor lvrobotsystemen saknar, slutsatser av lvförbandens uppgifter och teknikutveckling redovisas. Med stöd ur hela underlaget diskuteras sedan vad som skall demonstreras och hur detta skall demonstreras. Avslutningsvis identifieras två system som kan möta kraven på demonstratorn och ett av systemen väljs.

Recent changes in Swedish law suggest new groups of ?desired? labor migrants, which international students is an example of. Despite this, international students in Sweden have received little previous attention in the literature. The current study focused on international master students? experiences of job searching in Sweden and challenges they face in job searching, recruitment, and workplaces.

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

Unmanned aerial vehicles (UAV?s) are nowadays greatly appreciated. The advantage over manned airplanes are great since UAV?s can be much smaller and therefore lighter. The goal of this project is to evaluate the performance of an environmentally friendly UAV using only lithium-ion batteries.

The world we live in becomes more globalized as a result of new communication media. Communication occurs over greater distances which leads to increased travel. In the report AR5, by IPCC, it is showed that the human impact of climate change is clear and that something has to be done. Therefore its very important to change the human impact. A part of it is to change the way we travel within the service which leads to the purpose of the thesis.

Traditionally risk-based measures have been used to assess animal welfare in legislation and certification schemes. With increased knowledge and research, debate today tends to focus on and advocate the use of animal-based measures. However this is not a panacea for welfare and the most sound conclusion should be that assessment of animal welfare needs both. The aim of this thesis is to identify the points that need to be taken into consideration to find the optimal balance in the use of input and outcome measures according to the aim of the assessment and how these should be applied when designing a certification scheme? To answer this, a comparison of the use of resource-based, management-based and animal-based measures in two certification schemes for dairy cow welfare, Freedom Food (UK) and Svenskt Sigill (SWE), was made.

While the technological infrastructure that enables collaboration between municipalities, counties and private health care providers improves, so does the need for health-care providers to gain access to the right patient journal at the right time. For doctors, nurses and other health-care organization employees this goal is achieved by NPÖ, National Patient Summary. NPÖ effectively enables health-care records to be shared across organizational boundaries. This thesis is based on a demand by a mobile application that can give district nurses access to health-care records wherever they are.This thesis describes the development of a prototype of a mobile application aimed for NPÖ. This includes investigating a suitable mobile platform, investigating available card readers for reading electronic identification from SITHS cards and the ability to connect to external services such as NPÖ.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.

The purpose of the present study is to describe adult second language learners? experiences of mathematics learning from a past and contemporary perspective. What experiences in mathematics do they bring? What does it mean to learn Mathematics through their new language?The study is based on life-world narratives from five second language students with another native language than Swedish. Today they all study at a Swedish folk high school, at upper secondary level and they have previously studied at this level in Mathematics. The result shows that the meeting with the Swedish school and folk high school context is confusing.

Abstract Background Todays guidelines for advanced CPR emphasize chest compressions with good quality and early defibrillation. Prehospital CPR performed by ambulance crew, an automated external defibrillator (AED) is used. The AED analyzes the heart rhythm and the performer is following the advice to chock the heart or not, given by the AED. During on-going CPR there are sequences when no chest compression is performed known as hands-off time. Hands-off time includes the time for the AED to analyze the heart rhythm and the time when advice is given to the crew.