Since a couple of decades the community of Jönköping has worked out an urban vision of how the city should be appropriated expanded. The prospect extends to around year 2040 and deals with the area south of lake Munksjön in Jönköping, Sweden. Today there is a proposal of how this would look like and what main public functions that should be located there. One issue in the so-called urban vision 2.0 indicates a congressional building. This report describes how such an object can be designed according to the urban vision conditions.The work is focused on three main themes;* Architectural concept and a modern form of expression.* A functional attractive congress building in a new planned town centre.* General concept of a realistic structure system that meet the spatial and architectural possibilities.Various concepts in the meeting industry and in the architecture field are identified in order to understand the concepts and ideas with today´s congress buildings.

The purpose of the rebuild of Notnäs AB timber sorting line is to renew the existing drive and turning ends of the transport chain, which has become old. This means that Notnäs AB have problems to get new parts if the gearbox and chain are worn out. They also require that the rebuild should have a maintenance schedule for the new spare parts that will be used in the rebuild. Maintenance workers placed great emphasis on that in a rebuild it shall be a service-friendly design. The maintenance schedule used in Notnäs AB in the current situation is from Statoil and the report uses SKF formulas and recommendations in order to obtain a lubricating schedule.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

Background: Diversified companies, for example audit firms, sometimes offer different kinds of products and services. Different key success factors can in the same company thereby evolve. Goal congruence has to be achieved in the business divisions as well as in the company as a whole even though each business segment might have to focus on different factors. Purpose: The purpose is to analyze if differences in technology and culture between the business divisions in diversified companies motivate a differentiated reward system. Method: The study has a case study approach.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.

Commissioned for this report is Ramboll, Bridge and Tunnel Unit in Stockholm. Theidea throughout the work has been to primarily help bridge designers compilingadvice and instructions on how fatigue verification for railway bridges in reinforcedconcrete shall be performed under the new rules, the Eurocodes.After the introduction of the Eurocodes in 2011 has major problems emerged amongdesigners around Sweden. In some areas, it differs in the calculation rules comparedwith rules from the Swedish Transport Administration and the National Board ofHousing, Building and Planning calculation. Fatigue verification is one area where thenew calculation rules are different from the past.A large part of the report has been to interpret and find the relevant information inthe Eurocodes concerning fatigue. When questions or doubts have surfaced, this hasbeen discussed with Elisabeth Helsing at the Swedish Transport Administration andbridge designers at Ramboll.The result is a report where the structure is organized in the way that the bridgedesigners can move from cover to cover and realize that fatigue verification in realityfollows the same order as the report's sections.

Sustainability reports have during the last decade had a strong development. Both in terms of establishing a sustainability assurance, in its form, and get it assured together with standards, principles and regulations which organisations and accountants have utilized. The growth of sustainability reports and the choice of getting them assured have in particular favoured the accounting business. Due to this result, some critics have voiced that assuring a sustainability report gain accounting firms more than it gains the actual organisation. Other say that it is necessary in order to increase the credibility and the eligibility of the report, while it also has become a requirement from stakeholders.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

The professional football clubs can today be compared with company with profit aim, but the difference is that they also want to achieve sporting successes. In ten years, the Swedish Premier Division´s turnover has more than doubled and because of the strong economic development the license of elite was introduced. The license of elite´s criteria means that professional football clubs must have positively equity and requirements on approved or authorized auditor. Most of the professional football clubs are run as a non-profit association and legislations for these are relatively unclear compared with limited companies. The purpose of this study is to create understanding for how the audit process is implemented in professional football clubs compared with a limited company.

This study is a semi-­structured, qualitative depth-­interview study investigating Swedish institutional investors' perception of the fact that companies purchase non-­audit services from its signing auditor and if they see this as a threat to auditor independence. The study focuses on independence in appearance rather than independence in fact. The study is based on the current media debate on auditor independence and aims to provide a deeper insight to enlighten legislators how users of audited financial information look at the problem. The study builds on agency theory's notion that there is an information asymmetry between management and shareholders, which the auditor is to reduce. The results show that Swedish institutional investors perceive that there is a threat to auditor independence when companies buy non­-audit services from its signing auditor.

BakgrundAlkoholkonsumtionen i Sverige har stigit under senare år och låg 2007 på 9,74 liter ren alkohol per invånare och år. 17% av männen och 9% av kvinnorna beräknas ha en alkoholkonsumtion som kan riskera att skada hälsan. Termen riskbruk syftar på en riskabelt hög alkoholkonsumtion utan beroende. Antalet ?riskbrukare? är mycket större än antalet alkoholberoende.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.