Cheetahs in the wild are declining due to hunting, lack of prey, exploitation of habitats and loss of cubs to predators. Those are the main reasons to why cheetahs are kept in captivity today for conservation. Many cheetahs kept in captivity are seen pacing ? a behaviour that arise when the animal is prohibited from performing natural behaviours. It is believed to being attributed to a lack of stimulation in the environment where they are being held.

Tail-biting in pigs is an animal welfare issue and in Sweden during 2002 the producers lost tree million Swedish crowns because of tail biting. This economic loss depends on the pigs which are discarded at slaughter because of tail biting. Tail biting can be separated into two stages, "pre-injury" and "injury". The aim of this study is to investigate if tail biting depends on environment or genetic background.A lot of research on the environments effects on the behaviour of pigs but not so much on the genetic effects has been performed. The frequency of tail biting in pig farms influence among others of environment enrichment, ventilation, gender and breed of the pig.

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

Modern forestry requires a high degree of machine traffic for clear felling and scarification operations. The machines most frequently used are big and the traffic often results in tracks on the forest ground. There are many small streams running through a forest, in connection to logging operations, machines might cross these frequently. These crossings could result in the erosion of fine particulate inorganic matter, which ends up in the stream. The aim of this thesis was to give a general description of small forest streams of order-one in the county of Värmland and to determine the frequency of machine tracks in small streams.

Tail-biting in pigs is an animal welfare issue and in Sweden during 2002 the producers lost tree million Swedish crowns because of tail biting. This economic loss depends on the pigs which are discarded at slaughter because of tail biting. Tail biting can be separated into two stages, "pre-injury" and "injury". The aim of this study is to investigate if tail biting depends on environment or genetic background.A lot of research on the environments effects on the behaviour of pigs but not so much on the genetic effects has been performed. The frequency of tail biting in pig farms influence among others of environment enrichment, ventilation, gender and breed of the pig.

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

ObjectiveThe objective of this study was to investigate the clinical application to use ASSR in anesthetized childrenDesignOne main ambition of the investigation was to compare hearing threshold using ABR with estimated hearing threshold using ASSR. Another aim was to examine if the duration of an ASSR measurement could be reduced by only using the frequencies 1, 2 and 4 kHz and exclude the frequency 0.5 kHz. This is a retrospective study using electrophysiological measurement from a database.ResultResults showed a high correlation between hearing threshold using ABR and estimated thresholds using ASSR, with the frequency 0.5 kHz showing a slightly lower correlation. Result also showed that the test duration was increased when using all test frequencies in ASSR-measurement compared to when 0.5kHz was excluded. ConclusionThe study showed a high correlation when comparing hearing threshold using ABR and ASSR.

The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

Tail-biting in pigs is an animal welfare issue and in Sweden during 2002 the producers lost tree million Swedish crowns because of tail biting. This economic loss depends on the pigs which are discarded at slaughter because of tail biting. Tail biting can be separated into two stages, "pre-injury" and "injury". The aim of this study is to investigate if tail biting depends on environment or genetic background.A lot of research on the environments effects on the behaviour of pigs but not so much on the genetic effects has been performed. The frequency of tail biting in pig farms influence among others of environment enrichment, ventilation, gender and breed of the pig.

Svenskt Rockarkiv is an organization located in Hultsfred, Sweden. Its goal is to collect and document the history of Swedish rock music. The archive contains several types of documentation, such as audio recordings, photographs, posters, video recordings and books representing Swedish rock music history. In order to store information about the audio recordings in the archive, Svenskt Rockarkiv uses a SQL Server 2000 database and a client application written in Microsoft.NET C# and Windows Forms. The purpose of this degree project is to audit the database and windows client, since the organization has needs of new functionality.

To achieve an optimal combustion, an even air/fuel ratio in the combustion chamber is required. An optimal combustion leads to reduced amount of emissions due to a more complete combustion, which is an important matter because of the sharpened environmental laws. This can be attained, among other things, by applying entirely variable cam times. To optimize the engines efficiency and its emissions at all workloads and speeds, an active valve control can be applied. This means that the intake and exhaust-valves can be opened and closed at any time, independent of the crankshaft position.

LEXION is the name of the largest series of combines made by the CLAAS factory in Germany. LEXION was introduced on the Swedish market 1996 and was for sale in Sweden from 1997. LMB have sold over 400 LEXION-combines in Sweden. In cooperation with the Swedish general agency we decided to make a market research on the Swedish LEXION-market. The questionnaire was supposed to give answers about capacity and technical equipment. Before I made the questionnaire I studied manuals and combines. I got 81 answers of about 325 questionnaires. That makes 25 % reply frequency.

A helicopter based system equipped with a millimetre-wave fire control radar is studied for improvement of the detection probability for moving ground targets. The system is a pulse doppler radar that sends out the electromagnetic wave in repetitive pulses. The frequency in which radar sends this pulse is called Pulse Repetition Frequency (PRF). The velocity of the moving targets is measured by spectral analysis of the pulses received. With this sort of system some targets will not be possible to detect.

The majority of all power cuts that affects individuals and communities are caused by earth faults on the power transmission lines at 10kV and 20kV level [1]. If these power cuts could be eliminated, less disturbances and interrupts would lead to large amounts of money savings.Swedish Neutral has developed such a protection system. When an earth fault occurs power is injected into the neutral point of the transformer. The RCC (Residual Current Compensation) protection calculates a compensation current exactly 180 degrees out of phase to the fault current. Doing this, the voltage at the fault location becomes very close to zero, without affecting the power transmission.The protection system can only compensate automatically for the fundamental frequency (50Hz), and manually for the 3rd, 5th, 7th and 9th harmonics.

This report deals with RFID systems and how to detect nearby tags with the Mifare standard using only a microcontroller and an antenna circuit.The aim was to investigate whether there was any possibility to continuously search for a nearby tag for a system operated with batteries without compromising   the lifespan of the battery. At this time the system would take too long time to wake up and look for a tag to give a satisfactory battery lifespan, which should be done a couple of times every second.The report has two issues, namely:Is it possible to direct the microprocessor to detect and identify a nearby tag after the Mifare standard?What hardware is required for this to be possible?As the research method to provide answers to the above questions an action research was used. This approach has meant that the group worked on information retrieval, examined existing solutions, tested their own solutions and documented the results.The group examined an existing solution that can search for nearby tags with minimal energy consumption. An antenna circuit was built that was connected to the processor.