This Master?s Thesis aims to illustrate in what ways the two Swedish environmental Assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

The aim of this essay is to examine the supervisor?s view on the structure and content of the tasks given to students during their vocational training. The investigation could be of help for teachers when devising new vocational training tasks. The study is based upon qualitative interviews with five supervisors, all of whom work at preschools. The supervisors were asked to grade all the vocational training tasks on a scale from one (easy) to five (difficult).

Denna studie har som syfte att beskriva en lärares tillvägagångssätt för att tydliggöra kunskapskraven i Lgr 11 som är relaterade till skriftlig språkfärdighet i spanska, samt att ta reda på elevernas uppfattningar om detta tillvägagångssätt. I den här studien används uttrycket att tydliggöra i en bred mening, vari ingår både lärarens verbalisering av kunskapskraven och alla aktiviteter som läraren sätter igång och som ska hjälpa eleverna att utveckla en förståelse för dessa.Undersökningen bygger på en fallstudie i vilken olika källor har använts: intervjuer med läraren och fyra elever, enkät, klassrumsobservationer, en matris och ett urval rättade uppgifter.Resultatet visar att läraren och hennes elever verbaliserar sina tolkningar av kunskapskraven på ett likadant sätt. För att tydliggöra kunskapskraven använder läraren flera olika tillvägagångssätt, främst utsagor om kvalitet och exempel på korrekta meningar. Som utsagor om kvalitet använder läraren de formuleringar som finns i kursplanen, samtidigt som hon förklarar med andra ord och tydliggör för eleverna vilka konkreta tecken på kvalitet dessa innebär i en text. Återkopplingen till eleverna är också ett tillfälle för att tydliggöra kunskapskraven.Som metod för att tydliggöra kunskapskraven efterlyser eleverna framförallt konkreta råd om hur en text kan bli bättre, samt att få exempel på bra och mindre bra texter.Både läraren och eleverna är tveksamma till vilken roll tydliggörande av kunskapskraven spelar i undervisningen..

Banks carry a great responsibility when it comes to the financial systems in our society. Disturbance in the credit system affects both lender and borrower. All financial institutions must therefore carefully estimate their risk exposure. This assessment enables them to cover themselves from losses with appropriate capital buffers as main guardian. In order to prevent bank crises and also to maintain financial stability in general, new regulations concerning analysis and preventive actions were introduced on the 1st of February 2007.

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

This report was made for the company HordaGruppen AB to investigate how information security was handled. This report fits in the Master program of Internet Technology at School of Engineering in Jönköping University in Sweden.The question at issue was how you protect your information against different threats. One question was how to make an information security policy and which guidelines you can follow in the Swedish Standard, SS-ISO/IEC 17799:2000.Another question was to investigate the information sources at the company and which threats there are against it.The work begins with a presentation about information security for the chief of information and the chief of quality in the company. The next thing was to do a survey of as thing are at present with a tool from Länsteknikcentrum called ?Infosäkpulsen?.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

In public relations and marketing, lawsuits traditionally connote crisis. The purpose of this study is to explore the design and critical considerations concerning risks and opportunities when companies voluntarily initiate lawsuits with the partial aim to get publicity in the mass media. In the following paper, the communicative aspects of two such Swedish cases in the European Court of Justice are studied?a large corporation challenging the Swedish monopoly on gambling and a small company challenging the government on their restrictions for individuals to import alcoholic beverages. The case studies have been conducted through interviews, analysis of legal acts and press articles.

The purpose of this study is to explore how teachers at Swedish upper secondary schools perceive the so-called value words and knowledge requirements of religious studies 1 as defined by the present curriculum for upper secondary school 2011 (Gy11) how they consider themselves to apply these value words in their teaching, and whether they consider the knowledge requirements as alegitimate basis for equivalentassessment. My studyis based oninterviewswithfour teachers in religious studies at four different upper swcondary schools in the municipalityof Jönköping, Sweden. The results of my study show that the interviewed teachers perceive the value words in the knowledge requirements of religious studies 1,as defined by the present curriculum Gy11, aredifficult to interpret and that the value wordsare not definitive, but interpretable. All teachers use the knowledge requirements in theirplanning of teaching,but also in teaching where they are to concretize the knowledge requirements and value wordsthrough their own examples. Half of the teachers, however, experienced a lack of interest in the knowledge requirements by the pupils, which make it even more important to discuss knowledge requirementswith them, while the teachers?assessment has to rely on these knowledge requirements.

This thesis examines conceptions of gender revealed by people when assessing texts. The research questions are: What associations can be discerned between gender conceptions and ideas about the quality of texts? What features of content and style are perceived as female or male? The study seeks to develop a method for comparing different people?s assessments of the same text. The material was collected by means of questionnaires in which 114 informants were asked to assess three anonymous student texts and then guess the sex of the writer. The material has been analysed quantitatively by correlating the assessments of the texts with the guesses about the sex of the author, and qualitatively, as the informants? freely worded assessments of the texts were analysed for content and form with the support of assumptions about how assessments are expressed in text.