Different abilities are of importance to pragmatics, there among hearing. Hearing impairment can affect language development and also pragmatic ability. The aim of the present paper was to study the pragmatic ability in terms of request for clarification in children with Hearing Impairment (HI) in conversation with children with no known hearing impairment, henceforth normally hearing (NH). The present study also describes requests for clarification sequentially in detail, and also highlights points where there may be observable differences between children with and without hearing impairment. Eight conversational pairs consisting of one child with HI and one NH child were studied.

Prioritisation of software requirements is a critical part of the development of software. Whichrequirements and in which order they will be developed is one of the main tasks that requirementprioritisation supports.There are different ways that a requirement prioritisation can be used, for example alone or in agroup and with different methods.The purpose of this report is to map out how you can carry out a requirement prioritisation alonewith different types of prioritisation methods and how you solve the problems that can arise whenprioritisting requirements. This is done by documenting the use of three different types of methodsthat can be execute alone. The methods are "100-dollar test", "Ranking" and "Top-tenrequirements".To be able to prioritise requirements, you need to establish which requirements you shall prioritise.The paper retrieves this information by interviewing stakeholders in the system and analysing theresult of the interviews and the execution of the requirement prioritisation.Three problems arose during that work and I present solutions on these problems. The problemswere 1) equivalent requirements when using the "100-dollar test", 2) low differentiation gradebetween the prioritised requirements in the "100-dollar test" and 3) that the requirements that wereprioritised weren't classified before the prioritisation, which leads to inaccuracies in the resultingprioritisation.The solution to the problems that the paper presents is to increase the amount of distributable unitsin the "100-dollar test" to 1000 per requirement, suggestions of classes of the requirements andthe combination of the methods "100-dollar test" and "ranking" to bypass the equivalentrequirements.The report is written in Swedish.Nyckelord: GoTRIS, requirements retrieval, requirements analysis, Viktoria Swedish ICT,requirements prioritisation, requirements, 100-dollar test, ranking, top 10 requirements..

I ett samhälle där upphovsrätten och immaterialrätten blir allt mer uppmärksammad är det viktigt för företag att vara medvetna om sitt innehav av licenser för mjukvaror. I detta arbete kommer företags medvetenhet om deras licenshanteringssituation att undersökas. I den här rapporten kommer problemställningen att undersökas med hjälp av intervjuer med företag. Dessa intervjuer kommer att ske via telefon och per e-post. Ett liknande arbete har tidigare inte gjorts och därför känns det relevant samt intressant att göra denna undersökning.Arbetet resulterade i intervjusvar från 11 företag.

Leisure boats of today have a lot of electronics that needs battery power to work. In additionto that electric propulsion systems have gotten more popular lately, which further increasesthe demand for high battery capacity. The batteries used are mostly lead-acid batteries and toget the most out of the batteries it is important to treat them right. To optimize the electricsystem it is important to have knowledge of how the batteries and the electric motor are usedand which factors affect e.g. efficiency and recharging.A new electric drive that can replace old diesel engines is being developed and needs testingand evaluation.

Bakgrund: Ett antal nya idéer har blivit introducerade i ekonomistyrningen på senare tid och mycket har skett inom Business Intelligence (BI). BI har dock mest funnits som del av ett större system eller eget system som implementeras till företag på plats. Konceptet att istället hyra olika IT-lösningar, så kallade SaaS-lösningar (software as a service), blir allt mer populärt inom affärsvärlden och kan minska företagens börda när det gäller installation, konfigurering, underhåll och andra inneboende projektriskfaktorer.Frågeställning: Vad innebär fenomenet SaaS BI och hur ser spridningen ut?Syfte: Syftet är att beskriva Business Intelligence som hyrtjänst, samt studera hur detta sprids och anammas av marknaden i Sverige.Metod: Vi har använt oss av en kvalitativ undersökningsmetod för att samla in djupgående data till studien.Resultat och slutsatser: Studien visar att SaaS BI är en innovation. Spridningen av SaaS BI på den svenska marknaden är begränsad och spridningen sker i dagsläget främst från utbudssidan, alltså förespråkare av innovationen.

In this qualitative study the authors explores, by studying several quality-development models what quality in leadership is. The models are: Total Quality Management; SIQ?s model for customer-oriented organizational development; the EFQM excellence model; the ISO 9000:2000 standard; and Six Sigma. These models will be compared from Deming?s list for upper management; the Situational Leadership Theory; and the Contingency Theory.

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

The purpose of the essay is to study and create understanding to the bilingual students' perspective on their linguistic skills and the use of them as resources in a scholastic context. A qualitative method has been used to collect empirical data, based on the experiences and perspectives of the students. Bilingualism is defined and past research, which has shown how their bilingualism has influenced them, has been linked with this study. Definition of mother tongue and the meaning of mother tongue tuition for student immigrants' development have been discussed. This research has shown that the students feel their bilingualism is a natural occurrence.

The thesis examines the crisis that the Swedish-flagged merchant marine underwent in the 1990s, that resulted in a narrow market for the Swedish-flagged fleet. In order to save the industry, the TAP- agreement was created, consisting of three parties, government- market and interest organizations.  Purpose in this thesis, is to exam how the TAP-agreement was carried out in relation to the parties, and how it correlates in relation to how the global political economy affected the Swedish maritime politics. Two questions are presented. Is the TAP agreement an expression of Swedish corporatism?  Which aspect of Global Political Economy is characteristic for the TAP agreement? A case study is preformed in three steps. The different parties of the TAP-agreement have been interviewed.  A comparative study of two Swedish crises has been performed, in order to establish the correlation between them, in regards to corporatism.  A survey, with the aim to pinpoint which aspect of Global Political Economy is characteristic of the TAP agreement. Findings in this thesis are that the TAP-agreement was designed through corporatism, and that the most important aspect of all, the Swedish flag was worth saving, for all parties. .

This report documents the development of a software system for automaticscheduling called Hazel. This system is comprised of a server where an automaticscheduler has been implemented, as well as a web and mobile applicationthat allows users to interact with the system. The scheduler hasbeen developed with the functional programming language Haskell and usesa SAT-solver.Manual scheduling has long been the bane of managers everywhere, asmatching the needs of the employer with those of the employee is often adifficult and time-consuming task. There already exists several automaticschedulers that attempt to solve this problem. The issue with said schedulersis that thay tend to be expensive, or developed to only fulfill the needsof a particular organisation.