This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

This study focuses on the transfer between a product-oriented to a service-oriented perspective regarding marketing activities in companies due to the development of information technology. It illustrates how this very transfer has been, and can be, contemplated through the eyes of organizations working with marketing in a digital world on a daily basis. Technology has turned several industries - their price-setting, communication channels and supplying possiblities - upside-down. This turnpoint brings out a new way of observing and working with marketing. Therefore, we find it interesting to gain a better understanding of how actors within industries where the turnpoint is a fact observes marketing, and how this service perspective can be seen in their various organizations and daily.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders. Now thanks to their new system they can access their documents easy and on demand through their intranet..

Ipendo Systems in Linköping, Sweden, is a small IT consulting firm developing among other things custom portal applications based on Microsoft Sharepoint 2010. The purpose of this thesis is to investigate whether the test tools TestComplete and LoadComplete provide sufficient compatibility for functional and non-functional testing of Ipendo Systems? Sharepoint based applications, as well as design testing related activities to be incorporated into their existing software development framework. A test process maturity framework was chosen and applied for the design of the testing activities, while the test tool investigation resulted in guidelines on how to apply the tools effectively and circumvent any issues discovered..

During the 90s most companies organized and adopted routines for their environmental work. This work included for example eco-efficiency improvements and the introduction of environmental managing systems. At the UN conference in Rio in 1992 the concept Sustainable development was defined, but it was not until about the year of 2000 that companies in Sweden shifted their work from environmental management to sustainable management. A consequence of this is that they now have to focus on environmental aspect in conjunction with social and economic aspects.The purpose of this study is to gain understanding of what a change of focus to sustainable development means for companies. Has the environmental work suffered in the competition with social/economical aspects under the new sustainable focus? How will the new way of working affect the balance between environmental and social aspects? Changes were studied in five companies by analysing their annual-, environmental- and sustainability reports and through interviews of sustainable managers.

This work has been done by three development engineers and one computer engineer and in some cooperation with the company Phoniro. This report is written for computer science and is mainly oriented on the programming part in the project. The goal has been to develop a program that ensures the quality of the care that the home care organization delivers. The program is developed for cellphones and is supposed to be used in every visit. Several functions have been developed for the reason of reducing mistakes in patient visits, where the focus was on safe medication.

Many professions, such as doctors and psychologists, have a long history of work practice which have resulted that these professions have created their own ethical guidelines. The IT profession, which can be viewed as a relative young and somewhat immature profession, have yet to accommodate any clear guidelines regarding ethics. It?s therefore imperative to create discussions regarding ethical actions to raise the ethical awareness and also create ethical guidelines. The development of the IT profession is moving forward at a quick pace and it?s important to understand that this rapid advancement is not only changing the profession but also changing the society and the environment.

This master thesis has been carried out at Scania R&D at the department for Powertrain Control System Development during the winter of 2010/2011. In the thesis the writer examine and evaluate the existing method for collecting information from the tests carried out during the development of the Powertrain Control Systems software. It also contains suggestions for how a new method that enhance the validation elements could look like.The master thesis uses Vicentes theories of the ecological approach and theories of how knowledge sharing of tacit and technical information works within an organization and between the organization and its customers. First a workplace analysis at Scania R&D is carried out to see how Powertrain Control Systems work and how they test their software. Second a control task analysis, where the aims decided on after the interviews, is compared to the existing method.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

Cellulose nanocrystals (CNC) are great candidates for composite materials. The reasons why CNCs are such attractive materials for them are due to their great mechanical properties, high aspect ratio and low density. On the other hand, hydroxyapatite (HAp) is a kind of calcium phosphate and a main component of bones and teeth. The purpose of the present study is to make oriented nano-sized composites with CNC and HAp. Although some researchers carried out to make CNC composites with HAp for biomedical materials, nano-sized and oriented ones haven?t been achieved yet.

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user.

I vår produktion har vi tagit fram ett system för order- och lagerhantering, med vikt på realtidsuppdateringar, åt en extern mottagare där infrastrukturen inte hängt med i företagets utveckling. Vi valde detta projekt i syfte att bredda våra kunskaper inom både programmering och projekthantering. Denna slutreflektion tar upp den förundersökning vi gjorde för att kunna besluta om vilka verktyg vi använde i utvecklingen, den tar även upp vårt sätt att hantera och planera projektet. Under projektet har vi arbetat med en egenutformad arbetsprocess vilken även beskrivs här. --- Our production has been to design a system for ordering and supply management with emphasis on realtime updates to an external recipient, where the infrastructure has not kept pace with the development of the company.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

Distributed system development is a common occurrence in today?s technological and global world. Because the consequences of its geographically distributed nature it creates barriers between people that affects their communication and collaboration efforts in the distributed context. Despite a lot of technological breakthroughs over the last decades and the occurrence of video-conference applications and other tools for communication and collaboration, cultural and geographical issues have so far not yet been completely resolved. In this study I have made a literature study over distributed system development to form a set of central factors that affects the distributed development process.