This work aims to evaluate the possibility of using a graphical programming language to develop software for a digital signal processor. A fixed-point digital signal processor called Blackfin BF-537 is used for this. Instead of using conventional programming languages, like C or assembler, for software development the possibilities to use a graphical environment to fill the same purpose are examined. The development environment primarily used is NI LabVIEW, but also the use of Mathworks Matlab Simulink is investigated. A variety of programs consisting of various signal processing operations and utilities are developed using these development environments.

Digital preservation is a relatively new subject to Swedish archives. Alhough computers have been used for a long time, preservation has been made on paper and stored on shelves. These days a lot of cities in Sweden have investigated how to best secure the digital information for the future through electronic archiving, e-archives. One option is to hand in the information as soon as possible, but to let the producer keep the information ownership yet some time. The idea is to let the producers of the information answer questions and hand out material, since they are more competent on their field.

This report describes the procedure in which we accomplished our task, which was to implement a present algorithm. This was made using C++. The algorithm is developed by Sasan Gooran, who is our examiner in this project. The algorithm uses an iterative method to produce the halftoned images. The reason for this project is to speed up the existing program which is made in Matlab.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

The purpose of this thesis is to investigate the function of the museum library. The methodused consisted partly of literary studies, and partly of field investigations, conducted mainlyin the form of interviews.Two different sets of field studies have been conducted. The first one is an investigation ofthe museum libraries in Goteborg. After a preliminary study, three of these have been selectedfor further investigation. These are the libraries of Göteborgs Konstmuseum, GöteborgsStadsmuseum and Röhsska museet.

Någon gång i livet kommer de flesta individer tvingas möta på de svårigheter som en sorg för med sig. Sorg är en reaktion på en förlust. Syftet med studien var att belysa stödformer som kan hjälpa individer i deras sorgeprocess. Där sorgeprocessen i detta fall relaterar till förlusten av en närstående. Deltagarna var 23 stycken kvinnor mellan åldrarna 19-62 som hade upplevt en sorgeprocess till följd av närståendes bortgång.

The aim of this thesis was to develop an objective and automatic method for identifying capillaries in microscope images of the skin. Furthermore, statistical data about the identified capillaries and the capillary distribution should be computed and stored in a database. The method was implemented using the platform independent programming language Java. An analysis of microscope improvement using various polarization filter setups and wavelength filtershas also been performed, as well as a pilot study of the effect of applying a local anaesthetic cream on the skin. The method is developed and aimed at research on various pathological skin conditions affecting the capillary distribution.

Abstract I vår studie har vi intervjuat arbetsförmedlare som arbetar med etableringssamtal på Arbetsförmedlingen. Syftet med vår studie var att undersöka hur etableringssamtal går till och vilka faktorer påverkar samtalets utgång. Med hjälp av etableringssamtal så skall de nyanlända etablera sig snabbare och denna insats är frivillig. Vi genomförde kvalitativa forskningsintervjuer med åtta arbetsförmedlare som arbetar på etableringskontoret och som utför etableringssamtal. Resultatet analyserades utifrån samtalsmodellen The Skilled Helper av Gerard Egan, Vance Peavys konstruktivistiska vägledningsmodell samt begreppet gap som är taget från Cognitive Information Processing teori.

This thesis is intended to review and create a greater understanding for the history and originsof printed scraps from late eighteenth century to the beginning of the twentieth century.A questionnaire survey was sent out to several Swedish museums, containing questionsconcerning their collections, possible exhibits, special difficulties and types of damagesconcerning scraps and their current storage. A visit to the Gothenburg city museum storagewas made to take a closer look at their scrap collection and how they were stored. Thisresearch resulted in an understanding regarding the current situation of printed scraps, whichunfortunately appears to be quite poor and inattentive. These results are presented in the firstchapter.The second chapter describes the history of printed scraps, followed by a chapter presentingrelevant printing techniques and technology. This is followed by various chapters dealing withhow the printed scrap has been used through the ages, history and development of motifs andthe album's significance.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

AbstractThe ability to read and write is a very important skill in today?s information based society. Most of us learn how to read and write, but not everyone is blessed to do this without struggle. Dyslexia is a very common learning disability and therefore I found it interesting to study how teachers teach students with dyslexia.By studying the literature and by interviewing teachers, I found that dyslexia is a very complex disability. The teachers have to adapt their way of teaching in a way that a student with dyslexia can participate.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

The purpose of this study was to examine how food managers of Östergötland County disucss around their possibilities of reaching the government´s orientation towards 25 per cent of the food - procured, prepared and cooked in the school meal - coming from certified organic production. The study was a cross-sectional study in wich a qualitative approach was used. The sample consisted six food managers in Östergötland. Data processing was done through a semantic content analysis.  The result showed that involvment and intrest were significant factors for the introduction of organic food in the school meal. The three municipalities with the highest percentage of organic food used the SMART - concept.

Palm oil has been used in processed food commodities since the 19th century. An increasing demand for regulating and ensuring a more sustainable palm oil production has resulted in various initiatives. However, these initiatives have received critique due to lack of compliance and insufficient revisions of palm oil plantations. The initiatives for creating an ethical, social and environmentally sustainable production are not sufficient for the Swedish industrial users of palm oil. As a result, stakeholders such as Swedish food processing companies, commit to ethical sourcing codes of conduct that go beyond the international palm oil initiatives.