In my thesis I have sand blasted different type of woods - ring-porous and diffuseporous deciduous tree species and conifers - to show different results depending on the species, the direction of the grain and the effects of surface treatment of a blasted surface.The results of my tests were sometimes unexpected, such as that the sand from blasting almost completely disappeared, that all wood surfaces after blasting exhibited a much lighter or paler surface than before and that the diffuse-porous tree species showed differences in hardness between the beginning and end of annual rings.By creating a library of different kinds of wood and sandblasted surface treatment, I have created a reference bank that I will be able to use me in the manufacturing of interiors, furniture and other objects..

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

This study deals with the contribution of the genetic variant lactase persistence among Neolithic people from the Baltic Island Öland. Skeletal remains from twelve individuals went through DNA sequencing in order to find the mutation that allows adult individuals to digest milk sugar. The twelve individuals were chosen from two different Neolithic sites, where the archaeological and isotopic data suggest that the individuals from Köpingsvik were hunters and gatherers and the individuals from Resmo were early farmers. The individuals with the genetic variant lactase persistence can be described with selection and genetic flow.  Only five individuals produced results and the mutation was found in two of the subjects. All the individuals who were successfully sequenced came from Resmo, whereasno individuals from Köpingsvik yielded any results.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Konservatorsprogrammet 15 hp Institutionen för kulturvård Göteborgs universitet 2014:45.

The competition for Norway spruce pulp wood in Central Sweden increases, forcing the supply-structure of Holmen to face two important challenges. Firstly, it is of the outmost strategically importance to secure the long-term supply of Norway spruce pulp wood to the industries. Secondly, Holmen desires to increase the obtainable volume of Norway spruce pulp wood. This would enable the company to choose volumes in the lower price-segments and thereby decrease the dependency of costly marginal volumes. As this work shows, one part in managing these challenges could be to lower the quality standards concerning root rot (Heterobasidium annosum). Facts presented in the work shows that: 1. Technically, the TMP-industry of Braviken can handle a much more rotted pulp wood than that used today, although the cost of refinement increases.

I have done a follow up study of the restoration of two rivers, Röälven and Grundan, in order to evaluate the effects of the restoration on the endemic population of trout. Both rivers have been used for timber floating during many years throughout the 20th century, and because of this, had all obstacles such as rocks and wood parts removed. In 2004-2005 both rivers were restored, and rocks and wood were put back into the rivers. Spawning grounds were created and boulder dams were constructed to promote the streaming water. The result showed that the trout population of both rivers increased after the restoration, but also that the trout population of Röälven increased more than that of Grundan.

The Swedish forest have about 100 000 km of watercourses and it?s an important structure in Swedish landscapes and catchments. In some of the watercourses lives spieces like the freshwater pearl mussel (Margaritifera margaritifera) and brown trout (Salmo trutta) which both are sensitive for inteference from the forestry. The new EU water framework directive has a goal that all surface water will have high or good ecological- and good chemical status at latest by the 22nd December of 2015. The study has been made in the catchment of Håltjärnsbäcken and it is from a national perspective one of the most valuable streams in Sweden and which also have been included in a LIFE-project. The catchment is situated within the Eco-park of Malingsbo-Kloten and managed by Sveaskog AB.

The European Council agreed in 2008 on a climate and energy package to combat global warming. This package is valid for each EU member country and means that greenhouse gas emissions must fall by at least 20% and the EU's energy use to 20%, consisting of Renewable Energy in 2020. The Swedish Government has set stringent climate and energy with the intention to set an example for the rest of Europe. For example, renewable energy sources account for at least 50% of energy use and our climate emissions to fall by 40% by 2020. A combination of these goals and a steadily rising oil price has led to an increased demand for wood fuel in the form of such branches and tops.

In the collections of the Vasa Museum, 100 leather objects have exhibited salt precipitations. The objects, that have previously been impregnated with PEG, have become deteriorated and fragmented due to the precipitations. During a previously conducted study it was established that the precipitations consisted of iron and sulphur. However, it was not established whether they occurred in the leather?s inner structure and no treatment plan was developed.

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

Italy is the third largest market in Europe with a population of almost 58 million. The country is the tenth most important market for Swedish sales. Italy has a fairly good economy at the moment and the forecast tells of an increasing strength during coming years. Despite all of this, Sweden is exporting a fairly small amount of wood to Italy. Only around 2,3 % of all Sweden?s wood export goes to Italy.

How does the visitor experience the message and symbolism in an archaeological exhibition?Can they notice hidden elements in the exhibition and what decides if they see it or not?In my work I studied these things by making an investigation among exhibition visitors thathave much or none knowledge about archaeology and history. I wished to see how well theycan notice this and if knowledge is important for the understanding of the message and thesymbols. The case study takes place at the exhibition Metropolis at Kulturen in Lund, wherethe history behind and about the Medieval town of Lund is shown.My results show that the possibility for understanding the messages and symbolism exist, butthe chances to do so increase with knowledge.My goal was also try to give some guidelines for exhibition which will improve presentationof the exhibition. To express it shortly this include knowledge, self-awareness and to makevisitor´s studies.My paper also discuss related things: how exhibitions are made, the visitor, the society versusthe museum, the new growing trend towards the museum as a great experience, the changeswithin the museum world and how this affect the future of the archaeological museum..