The Department of Forest Products and Management, Swedish University of Agricultural Sciences has received means from Vinnova for a preliminary study of the organisation of logging work of today and how a better logging organisation should be brought about. This thesis reports results from qualitative interviews with nine forest machine contractors regarding the situation of their companies. The interviews have been analysed with respect to the genesis of the companies, which tasks they perform or that they could consider perform-ing, business relationships of the companies, relationships between the different partners of the companies, and the state of competition experienced by the contractors. The companies have developed either from the contractor previously being machine operator employee or from that the contractor in making has owned a machine and needed work. Their primary business is mechanised logging.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

This thesis concerns the Gotlandic hill-forts (sw. fornborg) situated on a cliff or in an elevated position and which traditionally have been referred to as cliff-forts (sw. klintborg/höjdborg). The study derives from the notion that these monuments, diverse in size and shape, by archaeologists have been viewed and treated as a homogeneous category of ancient remains. The author?s key aim is to challenge this perception by identifying various subcategories from the 28 cliff-forts on the island.Ever since the archaeological discipline initiated the study of cliff-forts in the late 1800s and more or less to present day, the interpretations have been almost solely dominated by explanations of the military and defendable nature of them.

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

Piles of deadwood are often retained in forests after management to support the biodiversity ofsaproxylic organisms which depend on deadwood to survive. Any knowledge about the crucial role ofpiles as suitable habitat of saproxylic organisms compared to single distributed deadwood objects thatare around the piles would help conservation actors to motivate more forest owners to supportsaproxylic organisms during their management. Therefore to give facts to this the saproxylic fauna ofdifferent pile positions (up and low) was studied and compared to distributed deadwood samplesaround each pile. Our study was focused on saproxylic beetles. Some other parameters such asdiameter, deadwood volume, pile volume and decay stage were assessed to define any effect.

Many wood living insects are considered threatened by modern forestry due to the reduction in amount of dead wood. During the last decade various methods have been used to enhance the quantity of dead wood in managed forests. However little is known how and if these methods are aiding saproxylic insects. The threatened tenebrionid beetle, Upis ceramboides, is already extinct in southern Sweden. It develops in white rotted dead birch (Betula spp) and requires sun-exposed sites.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

The background to this work was to see if there was a connection between large woody debris (LWD) and the presence of brown trout in our Swedish forest streams. Previous researches by Degerman et al. (2004) have shown that there is a strong correlation between the amount of dead wood and the presence of brown trout. The goal was then to find a way to restore, maintain and increase the trout habitats by constructing and adding manmade wooden structures that would mimic natural deadwood and its features in flowing water. The inspiration was partially taken from a water restoration program in the Klamath River of northern California, USA.

This bachelor thesis brings up a discussion about museums availability and access to thearchaeological display objects towards blind and visually impaired visitors. The study phasewill take start in analyzing four museums in south Sweden, all which have exhibitions aboutthe prehistory.Visually impaired and blind visitors don?t have a lot to go on at the current exhibitions aboutprehistory. This is because of the lack of access and availability when it comes to their specialneed. To raise awareness to this problem I took out a survey for the museums to answer.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

In this work I have tried to reconstruct the forest history within Särna-Idre forest common in northern Dalarna from the 19th century until present time. The Särna-Idre region has been an extensively used landscape for a long time. Pollen which indicates grazing has been found in samples orginating from the 10th century. Early travellers from the 18th and 19th centuries seem to have been passing trough a "used" landscape. Burned forests on naked ground are described as common. Also large areas are mentioned as undisturbed with lots of large trees, snags and dead wood.