The supply of uninterruptible power can be applied to many areas wherecontinuous operation is highly prioritized.The application of uninterruptible power for motor operation is facilitatedusing a frequency converter. Direct current operated frequency converters canbe applied directly to the power reserve which removes the need for additionalpower-converting.Batteries have long constituted the power reserve but advancements inthe development of ultracapacitors have created a viable substitution. Ultra-capacitors have high energy storing capabilities and can be applied to highpower applications.Maxwell is a leading manufacturing company of ultracapacitors and pro-vide different modules with built-in solutions for voltage balancing. Unevenvoltages between series-connected capacitors is a phenomenon caused by vary-ing capacitance. A configuration containing Maxwell?s 56V module is createdand constitutes the power reserve in the simulations.The discharge simulation shows a significant current that could damagethe system.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

Detta är ett examensarbete inom textil produktutveckling som har sin grund hos uppdragsgivaren Bellaobastian. Syftet med rapporten är att ge en inblick i miljöarbetet i värdekedjan hos mindre konfektionsföretag, vilka svårigheter som kan förekomma och hur den hållbara utvecklingen kan effektiviseras. Vi vill ge mindre svenska konfektionsföretag råd och förslag om hur de kan uppnå en tillfredställande nivå på deras miljöarbete utan tillgång till enorma resurser.Vi har utfört intervjuer, litteraturstudier samt jämförelseanalyser mellan företagen H&M, ACNE och Lindex. Vid diskussion och analysarbetet var det tydligt att miljöarbete i värdekedjan är en komplex process och att det är flera aspekter som spelar in.Vi har kunnat identifiera åtgärder som företagen kan utföra i hopp om att uppnå en mer hållbar utveckling, både specifika som tex, materialval men även mer övergripande som att ändra sitt synsätt. Åtgärderna vi kunde påvisa kretsar kring:- Minska överkonsumtion och effektivisera resurssparandet- Minska koldioxidutsläppen- Använd miljöledningssystem och märkningar- Ändra företagets synsättEn av slutsatserna vi kunnat konstatera genom våra undersökningar är att det inte räcker med att åtgärda problemen.

The main purpose with this master's thesis was to develop a survey with the intention to examine what expectations the JM AB:s customer had on a future garden and also to discuss if the lawn has a symbolic meaning in gardens. The lion's share of the thesis is based on a survey, aimed at people in the company's customer database. The intention was to examine what expectations they had on their future garden and if their expectations were met when they later bought a house from the company. The work also consists of interviews and visits to areas with newly built homes. I interpreted the result from my surveys as the lawn on its own being is a strong symbol for a garden and also signals a social status of the owner. To the company the pre made lawn on a role is a way of saving time and easily achieve what the customer request. The company wants to create a concept of a "preset-garden" that meets the company's vision as well as the expectations of the customer.

This essay in how to create a brand identity is a result of a case study of the Spanish mobilephone company Xfera and their new brand ?Yoigo?. Our object was to identify the critical variables in the process of building a brand identity. To achieve this we collected data about the company through several interviews with respondents with good insight in the company. The critical variables that we obtained by analyzing the interviews are presented in an empirical driven model.

The report is a project in cooperation with the Swedish toy company Playsam. The assignment was to design a new toy to their range of products, a pull along toy in shape of a snail with a mechanical function. The research phase contains studies and analysis of the company, its identity, product range and its customers. The research phase includes all the information needed to complete the project. A number of concepts were presented for evaluation by the company.

Background: Employees acting towards company goals and having a strong desire to remain in the organisation are very important for the success of a company. In order to generate such organisational commitment of the employees, the knowledge about what motivates and satisfies them is essential. Purpose: The purpose of this thesis is to investigate and analyse the factors which motivate employees, under consideration of individual characteristics. Limitation: Age, gender, marital status, work area, position and the years a person has been working in the company represent the individual characteristics examined in this study. Realisation: Literature research as well as a practical survey consisting of mail questionnaires and personal interviews were carried out in order to best serve the purpose of this thesis.

It has been even more important in the forest sector in recent years to look at the whole chain from suppliers to end users, to improve operations and improve performance and the profits of the company. The research and development have been concentrated on the buyer?s market and product development, probably because this research has capability to give an increased cash flow. But to obtain stability and continuity in the production and selling units, the suppliers should also be investigated. The aim of this thesis is to study a one company's existing suppliers of roundwood and investigate the differences and attitudes they have about the company offerings.

All companies wants? to be as profitable as possible. The company in question is one of the leaders in it´s field in Sweden. In order to increase profits as much as possible it is important to identify and eliminate eventual quality defect cost as far as possible.This study was performed in Huddig AB, and the purpose of this study is to try to develop a routine for monitoring the quality defect costs, and to improve communication and create feedback between production and aftermarket.In addition to an extensive literature review on quality defect costs most of the work have been conducted at the company. Own observations and interviews have been done with the staff to get a picture of the current situation and to try to come up with improvement proposals.During the study it was proved that much of the quality defect costs in essence, derived from the production, which is seen as positive because it is the easiest part of the company to improve.

During twelve weeks of practice experience at the company Sydved AB, I received the mission to develop a structure for the company?s internal communication. A part of this mission was to find out what the company?s employees thought of Sydveds internal communication and the most important; Sydveds intranet called ?Outlook?. Due to Sydveds plans of developing the intranet I designed and accomplished an inquiry-study to find out about the employee?s opinions on the company´s internal communication and in particular their intranet.The answers I want from this study are if I shaped the inquiry-study correctly the first time.

The purpose of this paper is to survey the textile based proto-industrialism in Sweden in the middle of the 19th century. This case study is founded upon Anders Hansson?s pre-industrial textile production at the estate of Mölneby, Östra Frölunda in the rural district of Kind in the province of Västra Götaland.Account books from the year 1853 related to Anders Hansson?s wool fabric manufacturing have been looked into and categorized using a quantitative research method. The research has also been supplemented with a number of interviews.The result of the survey shows that Anders Hansson?s business activities fit into Mendel?s theory of proto-industrialists at a practice level.By collaborating with a merchant in Gothenburg the fabrics were traded in unknown markets, as well as in more familiar neighbouring districts.

The increased specialisation and complexity in products and services has created the need for Swedish companies to focus more on their core businesses. This has resulted in them opting to buy services and products that lie outside of their core business from consultancy businesses or other types of suppliers. When companies describe their offers in internal and external marketing it is done often in terms of company or service attributes that are not based on customer value or offered value for the customer. The reason for this is that companies have not adapted their services to the different needs of their customers. As a result of this, they run the risk of offering the same services as their competitors and communicate values that the customers either do not understand or experience as value adding.

Background: It is today common for companies to provide some sort of incentive for CEO's and senior management positions to motivate, retain and benefit employees within a company. This is in order to drive the goals of the CEO and management in the direction that is desired by the owner. Currently, the Swedish centre-right government has forbidden the use of such variable pay within state-owned companies. There are two different attitudes to variable pay, one that is in favour and one that rejects it. However most people agree on the fact that a well-functioning incentive scheme can be of great strategic importance for a company.Approach: has variable pay to CEO's had any effect on the company's profitability.Aim: the aim of the study is to compare companies who use variable pay to CEO's with companies that do not in relation to their profitability in terms of profit margins, yearly performance, returns on total capital and returns on equity.Method: the study uses a quantitative approach.

AbstractThis paper is based on a research conducted in a medium sized company, situated in Sweden, with the intent to study possible connections regarding views of gender and the existing sex segregation within the company. How is gender constructed, and does it exist representational ideas of the sexes, that leads to restrictions for men and women to be working within different areas of the company? Why are there such few women working within the company? Through five interviews with employees within the company, three women and two men, I found answers to these questions. My thesis and the specific questions were categorized into three different themes. The first theme aims to understand the interviewees? discussions of gender and labour.