In the media world today it is important for TV-companies to differentiate since the number  of competitors has increased. The competition is more complex today because of the  possibility to broadcast throughout satellite and cable. As a company you need a strong brand  in order to differentiate the company from the competitors. The brand of media companies are  set by the content of the offer, which means that the program and the people connected to the  television program has an importance for the sake of how people experience the company. For  a commercial TV channel the content is also important because it attracts the viewers and as a  consequence, also attracts the advertisers.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The study has shown that retailers in the mid-price segment differentiate their brand through developing a strong company identity around the brand. The personality involves store atmosphere, merchandise and advertising. Larger companies have chosen to lay the responsibility on management level, which facilitates on store level. By controlling the strategies on a central level the company can make sure that the stores are steered in the direction that the company wants them to be steered in, and also that they follow the positioning-concept. The company can also devote its efforts to working with its core value, which is service.

Mergers and Acuisitions are becoming increasingly common. This can be explained with the fact that the competition is increasing. Therefore many companies are forced to join other markets. This thesis inquires into the process of Mergers and Acqusitions when one company buys another company. The main focus is set on how three different banks handle the process of Mergers and Acqusitions and what results this leads to. These are: Kaupthing Bank, Nordea and Citibank.

In this paper we have looked closer on a car-retailer in the middle of Sweden. We have chosen to dig deeper in the different problems that can occur, related to the supply. Soon we realized that that the problems weren?t related to stock management. Through studying the whole of the company, we have identified reasons to why details aren?t in the stock.

AbstractThis bachelor thesis deals with the close company rules in chapter 56-57 within the Swedish income tax law (IL). The purpose of this thesis is to analyse the outsider rule in 57:5 IL. If a shareholder or a family member works or have worked actively within the company within the fiscal year or the last five fiscal years then the partner has qualified shares and is to be taxed according to the special closed company rules.If an outsider, directly or indirectly, is a significant shareholder within the company, and directly or indirectly, are entitled to dividends then an active partner only has qualified shares if there is special reasons. When making the assessment regard must be made to conditions under the fiscal year or the last five fiscal years. There is special reason not to apply the rule if there are agreements regarding how the profit should be split or cross-ownerships between companies.If a taxpayer can show that an outsider own 30 percent of the closed company and has a right to dividends and there is no special reason to why the rule should not be applied then the outsider rule is applicable.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The study has shown that retailers in the mid-price segment differentiate their brand through developing a strong company identity around the brand. The personality involves store atmosphere, merchandise and advertising. Larger companies have chosen to lay the responsibility on management level, which facilitates on store level. By controlling the strategies on a central level the company can make sure that the stores are steered in the direction that the company wants them to be steered in, and also that they follow the positioning-concept. The company can also devote its efforts to working with its core value, which is service.

Background: Many companies have outsourced their IT-operations and their expectations of what this IT-outsourcing will contribute to the business are high. Cost cuts are not always a natural outcome of IT-outsourcing. Many companies that have outsourced their IT-operations consider it to be problematic and complex to exercise management control and reach cost control which was the purpose of the IT-outsourcing. Purpose: To describe and analyze what affect IT-outsourcing has on a company?s management control system and a company?s possibility to exercise cost control.

By means of group contributions the legislator has made it easier for company groups to transfer profits from a parent company to a subsidiary. A parent company can choose to reconstruct by acquire a company, create a subsidiary or perform a partial fission. The choice can affect the possibility for a parent company to perform a group contribution with deduction right.The parent company has to own more than 90 percent of the subsidiary?s shares for a whole taxation year or since the subsidiary began to carry out any economic activity in order to perform group contributions with deduction right. If a subsidiary is acquired, it has to be owned for a whole taxation year before group contributions with deduction right can be made, unless the acquired company never has carried out any economic activity before.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.