Rising energy prices and higher energy demands have led to an increased focus on energy efficiency, in particular in the real estate business, where high potential for energy savings exists. Within the next few years, buildings that were constructed in the sixties and seventies will be in need of renovation. One of the challenges of these renovations will be to improve energy efficiency. A real estate company that is facing this challenge is Uppsalahem AB, based in the city of Uppsala, Sweden. This study focused on analyzing energy efficiency measures when renovating old buildings.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

Every year a number of tenant-owner flat deals are concluded and the availability of real estate agents on the market is today very widespread. It has become increasingly difficult for estate agents to distinguish themselves in a way that makes the estate agent the customer?s choice. Estate agents must have a good understanding of what is important to the customer. An apartment deal is, for most people, an important event in their life.

All around the world more and more people move from rural areas to live in the cities. Because of this, the urban areas have become an important part in the debate about the effects on the environment and sustainability. In many countries word wide initiatives have been taken to build sustainable cities and eco cities, the Stockholm Royal Seaport is one example. The vision for the district is to become a world class sustainable city based on the three dimensions of sustainable development: social, economic and ecologic. The municipality of Stockholm has set requirements for the buildings? energy usage, emissions and amount of waste generated during the building process.

Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.

Poorly maintained forges are a common sight in the province of Gästrikland. Because of their changed appearance, possible move from the origin location and poor items related knowledge they will rarely qualify for the range of funds available through Länsstyrelsen. Therefore this study deals with the problems associated with the forges in southern Gästrikland, i.e. Hedesunda and Österfärnebo parishes.The aim of the study is to increase the items related knowledge of forges and perhaps form the basis for restoration projects in the area. Eleven forges have been examined and the changes they have undergone have been highlighted.A forge was erected on the farm and was used for the households needs such as producing and repairing tools.

This thesis tries to clarify why more houses such as passive houses is not built and at the same time the differences is described with the conventional construction as a starting point. Sweden has set environmental objectives to reduce energy consumption in buildings by 50 percent by the year 2050 compared to 1995. The passivehouse concept could have a significant role, particularly in the reconstruction of buildings with high energy consumption. For sustainable building the passivehouse technology is an economically viable concept while benefiting the environment. Initially an introduction is given of the background to the problem, purpose and objective of the thesis.

Uppsats för avläggande av filosofie kandidatexamen ikulturvård, bebyggelseantikvariskt program15 hpInstitutionen för kulturvårdGöteborgs universitet2014:21.

The purpose of this paper is to analyse and discuss clinch-nails found at an excavation at terrace II in the Garrison of Birka, on the island of Björkö in Sweden. This type of clinch-nails is common in Viking age Sweden and is usually interpreted as coming from boats. The study will try to show that these types of nails could have been used in several kinds of wooden constructions. It will also show how the nails were made and what kinds of tools were used by the Viking smiths. The study has shown that this type of nails were used in several different types of wooden constructions such as boats, sleds, cart bodies, coffins, Birka's ramparts and buildings.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

I have studied the suburban municipality of Botkyrka, south of Stockholm, from a rural perspective. Through that I`ve compared how countryside comes into being with the planning and building of suburbs. I have looked for a definition of Countryside, and found that it is often explained or defined in negative terms, as what it is not. In that it says nothing about what it really is, or about the qualitiies it has to it. Botkyrka is a suburb, but it does in large parts consist of countryside. Apart from defining countryside and rural I´ve been searching for a definition of suburbia, of it´s structure and the mental picture we have of it as a cultural phenomena. In order to understand the role that suburbs have in planning I describe their history from Italian renaissance villas to sprawl. By opposing urban and rural, modern urban planning and how rural areas are created, I´ve come to a definition of rural planning and the making of countryside. To make countryside, planning and building should come from individual needs and desires. A relationship to the surroundings based on continous interaction between the human beeing and it´s environment, a constant process of shaping and reshaping. To put my thoughts to the ground I have collected examples of projects and ideas, that fits into my view of what rural planning and making countryside is all about. They are put in different categories according to the possibilities of influence and to what degree it is put into private hands. The first category is ?allemansrätten?, every mans right. That is the rigt to use private land as long as you don´t disturb or destroy.

The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

District heating covers around 80 % of the heating demand in Apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The author has, with the help of AK Consultancy Indoor Air AB, formed a series of questions regarding moisture problems in buildings and how these are handled in extreme climates with high temperatures and a high relative humidity. Furthermore to analyse and indentify key material that makes a construction safe against moisture problems. Ventilation, AC and the choice of materials have in a later stage of the thesis been investigated to enhance the knowledge of moisture protection. The research for this report includes measurements on existing buildings, calculation models on the building envelope for analyses and the ingoing materials of the envelope. The health aspect of moisture problems related to ?sick building syndrome? has been included and interviews have been conducted to gather relevant information.A study of the American system, ASHRAE, American Society of Heating, Refrigeration and Air Conditioning Engineers and the standards used in Singapore has been made to highlight the difference.