In the pulp industry, digesters are used to disolve lignin in wood chips. The concentration of lignin is measured and is called the Kappa number. In this thesis, the question of whether an online Kappa sensor, taking samples from the mid-phase of the digester, is useful or not is analyzed. For the samples to be useful, there has to be a relationship between the measured Kappa at the mid- phase and the measured Kappa in the blowpipe at the bottom of the digester. An ARX model of the lower part of the digester has been estimated.

We are living in network society, where information and communication together with the technical development stands in the centre. Characteristic for network society is quick changes, new meaning of time and space, convergence and new possibilities of communication. Network society contains new technical developments, several with thepurpose to improve the possibilities of communication between human beings, which in some ways creates new social demands and expectations. In this study, I focus on the Internet, which is an important channel for the information, communication and marketing in network society. As whole network society, the Internet is constantly developing.This study, implemented with qualitative interviews, has the purpose to give new, deep and interesting knowledge about business to business companies? communication and marketing on the Internet.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

During the development of microwave based sensors such as radar target seekers, input signals are needed to verify the performance of the system. Therefore, a channel board has been developed by previous thesis projects at Saab Bofors Dynamics. It uses a technique called Digital Radio Frequency Memory (DRFM). The purpose of this board is to sample and digitally store radio frequency signals in order to reconstruct them after a certain delay.The aim of this thesis project was to use the channel board named above to construct a portable instrument for generation of stimuli signals. This assignment has been divided into two tasks: firstly, to construct and put together the hardware components and secondly, to implement a graphical user interface for the instrument.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This report aims to study the condominium prices in central Stockholm and the factors thataffect these prices. A linear regression model was set up and data about relevant covariatessuch as floor area, mortgage rates and where the condominium is situated were gathered toassess if and how they influence the price. The raw data was processed and enhanced to gain asmuch relevant information as possible to the model. To determine the covariates? influence onthe final price, regressions were ran and various tests were performed on the output data.

Does the country people live in affect the probability of them experiencing happiness? Can a country variable in an ordinal regression model be affected when microeconomic and macroeconomic factors are added to the model? The possible outcomes are either that the country variable affects less when the additional predictors are added to the model, or that they stay the same. The micro data is collected from the European Social Survey database, the macro data is collected from the World Bank. The country variable becomes less substantial when additional variables are added to the model. The variable with the most influence over expected happiness apart from the country variable is whether the individual often socializes with friends or not.

At the department of Electronic Warfare Assessments at the Swedish Defence Research Agency in Linköping one of the activities is modelling and simulation of the duel between a robot and a target. The aim with this Master's thesis is to develop a simulation model of an hovering helicopter. First a theoretical description of the forces and moments acting on an helicopter is given. Then the equations of motion are derived. These equations are simplified to be valid only for a hovering helicopter and the result is a mathematical model.

In the 1960?s, Paul Hersey and Ken Blanchard developed a theory called Situational Leadership. Situational Leadership is a model where the leader analyses the needs of the situation and the needs of the people to be led. After analysing the situation, decision is made on what leadership style to adopt. The Situational Leadership model was developed in a company environment.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

Nötcenter Viken is a Swedish nucleus herd for dairy cattle. The goal for the farm is to select suitable mothers for the next top generation of bulls. Today the selection for udder health is based on a pedigree index and phenotype data. The pedigree index is based on the cow?s father and grandfathers breeding values.

This examination paper is the account for the author?s work while arranging and registrating the business archives and business records of the Herman Bergman?s Foundry in Stockholm, Sweden. It is part of the one year Masters program in Archival Science at the University of Uppsala. The records are from the beginning of the 1900s to the 1970s. Most of the business archives are from he 1940s to the 1950s.