This master thesis covers the seasonal planning of a small scale hydropower system. The system in this study is owned and operated by Mälarenergi Vattenkraft AB. The total system consists of 4 different main rivers with 24 hydropower stations and several dams. The total installed power in the system is 43.75 MW. Most of the hydropower stations are regarded as small scale hydropower stations and thus entitled to green certificates.In this report the issue of planning is formulated as an optimization problem.

The purpose of this report was to investigate what characterizes a good psychosocialwork environment, and whether it may have impact on a vessel's safe voyage. Thisreport is proposed to increase the understanding of what creates a good psychosocialwork environment and its potential effect on safety at sea. In order to find out thesuccess factors for a good work environment group interviews were conducted in socalledunstructured focus groups. During these conversations, the participants discussedfreely by the question "what is a good psychosocial work environment for you?? Thesuccess factors were thereafter applied on selected accident reports, to investigate theextent to which they were represented and taken into account.The results of the study show three categories of factors: colleagues, communicationand competence, where colleagues are the main contribution to a good psychosocialwork environment.

The big change is a project where I created patterns on fabric. It is a collaborative project with Lotta Niemi. She studied fashion and textile designers and tailors from the Swedish School of Textiles in Borås and University of Technology in Sydney. The collaboration was to create designs on fabric for her upcoming clothing line for women, Fall / Winter 2013. The clothes will be sold online, in stores in Sweden and Japan.For Lotta Niemi?s clothing line, I wanted to create exclusive designs, rich patterns that worked out handmade and digital.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

ADHD has for a long time been perceived as something that affects children and grows away with time. American psychiatric association state that ADHD may appear differently with adolescences and adults than with children. That could lead to misunderstandings and exclusion by adults and adolescences with ADHD at work life amongst other situations. This report investigates that exclusion and tries to find what information that needs to reach certain target groups to prevent it from happen.The works focus is text design, a part of information design, and looks firstly at the factors that make good information material. Then I investigate if there is a need for more information about ADHD within working life and if so what it would contain.

The aim of this report was to do a case study at a geothermal heating system which has been in operation for about 5 years, and study if its performance has changed during this period of time. A literature study about the processes involved was also done in purpose of background knowledge.The tenant-owner?s association Duvan at Petterslundsgatan in Uppsala installed year 1999-2000 a geothermal heating system. The purpose of this installation was that they hoped it would lead to a smaller usage of district heating which would lead to a reduction of the heating expenses for their buildings. The geothermal heating system consists of 19 energy wells and 4 geothermal heat pumps, and it is one of the first systems of that size in the region of Uppsala.

Syftet med denna studie var att synliggöra förskollärares tankar om vardagsmatematiken. Studien skulle även innefatta hur förskollärare tar tillvara på den vardagliga matematiken. Vår metod i studien gick ut på att intervjua förskollärare genom en self report, som tillhör den kvalitativa forskningen. Vår self report innebar att de tillfrågade förskollärarna skriftligt fick redogöra sina tankar och erfarenheter utifrån frågeformuläret. Med hjälp av vår self reports öppna frågor synliggjordes förskollärares djupgående tankar om ett visst fenomen, vilket leder in vår studie till en fenomenografisk forskningsansats.

Background: The environment and the design of auditing regulation can vary significantly between countries, which can affect the form, content and quality of the audit report. The purpose of the International Standards on Auditing, ISA, is to facilitate the work for auditors on an international basis. Sweden today follows the RS 600 which is based on ISA 600, which contains standards for when an auditor use work performed by other auditor. In October 2007, came a revised and redrafted version of ISA 600 that will be enforced in Sweden in the audit of the financial year beginning on 1 January 2011. To what degree the new requirements will affect the group audit is clearly dependent on how the reporting, evaluation and instructions between the group auditor and other auditor has been carried out previously.Aim: The aim with this paper is to explain the reporting between the group auditor and other auditor in an international corporate group.

The purpose of this report is to examine the possibilities to decrease the number of insects and other pathogens in a crop of pak choi (Brassica rapa), grown with different types of cover and living mulches. Included in the report is a study of literature where amongst others, a summary on the vegetable pak choi and theories of living mulches and different kind of covers are to be found. To examine the amount of predators in the field, traps were used. During the autumn 2002 the tests were conducted in Alnarp. The pak choi and the living mulches were planted/sawn at the same time, the different covers were also applied at this time. The total experiment was divided into six different treatments (plus control) of which three were with covers and three were with living mulches. Once a week the number of leaves, the height and damages were read on ten of the plants from each parcel.

BT is a global company within the lift truck industry. The main office is located in Mjölby. In Europe all sales and service activities are carried out by fully owned sales companies. I North America, BT RAYMOND develop and distribute trucks under a different brand. For the rest of the world BT works together with a distributor network, most of them are fully independent others BT has a small ownership in.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

This is a report about accessibility. For this project the accessibility of a building in the city of Halmstad was evaluated. It´s a three storey building with five apartments on each floor divided by two stairwells. These five apartments have since been divided into three different types of apartments. Each type of apartment has been assessed separately.

In April 2008 an official report, SOU (2008:32), was presented. In that report it was suggestedthat the statutory audit for approximately 96 % of the Swedish companies was to be abolished.The report suggests that the new regulations should apply to all limited companies thatare below two of three limits that have been suggested: a) a balance-sheet total of 41,5 millionSEK; b) a net turnover of 83 million SEK or; c) less than 50 employees. The regulations aresuggested to come into force July 1, 2010. According to the Swedish laws that regulate thelimited companies, Aktiebolagslagen 10:11, should all limited companies regardless of sizehave an chartered accountant or otherwise approved. The purpose of the audit is to create atrust towards the figures that the company shows and also to act as an assurance towards thirdparties (Collis, 2003; Strenger et al, 2008).

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.