In times of increased flooding, enhanced by climate change, polluted stormwater poses an increased threat to the environment through contaminated water entering waterways. Bioretention utilizes natural processes in soil and vegetation to treat pollutants and combat this threat. Biochar produced through pyrolysis, has a high cation exchange capacity (CEC) and could therefore increase treatment in bioretention systems. This research applies a literature review, interview, and a model to explore the benefits and disadvantages of biochar in order to specify a soil-mix through an understanding of the production process and preferred application rate. High purification through CEC, increased water holding capacity, and carbon sequestration being the benefits discussed.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

At night, the visibility is reduced and the demands on the driver increase. A safety system that enables the driver to discover warmer objects in the surroundings when the visibility are reduced, such as the Vision Enhancement System (VES) contributes to safer night-time driving. Since the benefits of this system are established, it is of interest to investigate different design aspects. The VES display has in earlier studies been positioned in front of the driver but different display positions such as peripheral placement should be evaluated. The present simulator study is an investigation of the effects of different display positions inside the car.

Flooding events are no longer rare, floods occur all over the world. Accordingly, it is vital for the society and different authorities to work with flood mapping. To meet the goal of Uppsala kommun to map the risks of floods in Uppsala län, a map of the different areas around Funboån which are inside the area of risk for flooding have been developed.In the work, cross sections and the water flow have been measured. Moreover, an echo-sounding have been carried out in Funboån to map the bottom topography. From the bottom map and laser scanned data covering the study area, a terrain model was created.

A mobile testing application using Unity was developed to analyse what impact button sizes and button layouts has on the accuracy of touch as well as the time to finish a labyrinth. This was tested on a Nexus 4 phone. 28 users navigated a small object through a labyrinth in which they collect keys to open the door to the exit. Each participant did the test 6 times with different combinations of button size and button layout each time, done in a random order. Hits, misses, completion time, order of button size and order of button layout was collected and then visualized using R.

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

I have with this thesis sought to understand how chick lit could be useful in the classroom in the teaching of Swedish B-course in high school. Based on the model of critical literacy I am arguing that this genre would help to meet the objectives of the policy documents which, among other things, are to critically examine and analyze various types of texts.I have found that some of these texts could be used for analyzing and critically examine the ideological dimensions of texts and cultural heritage by the model of critical literacy, and also as a counterweight to the more traditional teaching of the canonical literature as a literary historical stuff that students should learn. I have also wanted to create a basis for discussions about literature in the classroom based on the chick lit genre. To do this I have, based on three themes and questions from the model of critical literacy, tried to focus on issues that might emerge from the ideological analysis and critical review. The model aims to deconstruct norms of society, and in the work of chick lit, I wanted to show how you could deconstruct norms around gender..

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

This thesis explores different ways of navigation in virtual environments. It also investigates how virtual environments can support human memory. Tests are done using a self made virtual model of Orkanen Library, Malmö högskolas school library. Among the different navigation tests that were done, a visual guidance in form of a line on the ground leading to the goal is showed superior when navigating a virtual environment but that people prefer legible landmarks instead. Tests were also done which show that a 3D-model of a real location supports context based memory.

This thesis discusses main problems associated with dictionary-based Cross-Language Information Retrieval as lexical and translational ambiguity of query terms, translation of compounds and phrases, dictionary limitation. The purpose of the study is to investigate how query structure influences the effectiveness of CLIR regarding performance of three query types: original query, unstructured query and structured query. Query structuring refers to the application of #syn-operator to group query terms. The study comprises an experiment that was performed in the InQuery IR system with TrecUta database that contains 550,000 news articles from different American newspapers. 24 topics were used for the experiment.

Triage, which means "to sort", determine the priority of the patients need of care. The aim of the present study was to describe nurses? perception of triage at a pediatric emergency department. A questionnaire with open- and closed-ended questions were distributed to all 25 nurses that worked at a pediatric emergency department. The answer frequency was 48 % (n=12).

The purpose of this thesis is to construct a marketing model to be used both theoretically and practically when working with marketing in Swedish public libraries. This objective is achieved by first making a literature review of the written works on the marketing of libraries, and then studying the marketing activities at the public library in Bollebygd, Sweden. The theory is based on the marketing mix model the 7 ps, which serves as a framework for the presentation of the empirical result and the analysis. One of the questions posed in the beginning of the paper is how the library has worked with marketing over the past ten years. Through a combination of methods observation, textual studies and interviews the marketing activities employed at Bollebygds library are noted.

The Swedish Armed Force has a need to streamline the preparation of an exercise in tactical training for soldiers because the preparation of an exercise is currently laborious and time consuming when commanders manually share files to each computer that will be included in the exercise. The degree project was to create a file sharing program within the internal network of the Defence Forces? international centre (Swedint). The program is used by the training management to effectively start up an exercise where soldiers train tactical training in a simulated combat environment. The training management use this program to upload files to a server which notifies all the computers on the network to download these files.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.