Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Use of computers and computer networks is nowadays a part of everyday life. You do not use them only at home when you sit at you computer, but you can use them all the time everywhere. This can involve everything from surf to any website when you are at home, to checking your email on your mobile when you are on your way to work. Most people do not think about how it really works when they try to access a web page by typing the address into their browser, but something that most people probably notice is how long it can sometimes take to access a web page.All items which are directly connected to the IP network have a unique IP address that is used to make it possible to communicate. The IP address is either a period separated sequence of digits representing 32 bits or a colon separated sequence of digits representing 128 bits, depending on whether the address is an IPv4 or IPv6 address.

The jetengines of today are growing in complexity. Reliability for aircraft engines are of extreme importance, mainly due to safety reasons but also economical ones. This master thesis deals with faultdiagnosis in the turbine section of RM12, the engine used in Saab/BAe's Gripen. Three different faults which can occur in the turbine section was studied. These faults are: clogged fuel nozzle, hole in outlet guide vane and sensor fault.

Assessment of the level of the pupils´ knowledge and understanding are important parts of teaching. There are diverse ways to do this and many different tools to use.The purpose of this study is to explore, through qualitative interviews, how five teachers work with assessment. The focus lies on both how they work with assessment in general and how they use the assessment tools called »LUS» and »Nya språket lyfter!». The pupils´ participation in their own education is an important part of the Swedish curriculum, which is why the study also focuses on how the informants work to enable the pupils´ participation in the assessment and in their education.The informants all think that both assessment and the pupils´ participation in the assessment are important, since teaching is easier when the pupils are aware of what they need to know and learn. Many of the informants express that time is an issue when it comes to making the assessment trustworthy.

Försäkringskassan (FK) har fått i uppdrag av regeringen att vidareutveckla bedömningsförfarandet för sjukskrivna i Sverige. Som en del i detta har bland annat ett nytt bedömningsinstrument tagits fram för att användas vid arbetsterapeutisk kompletterande bedömning av medicinska förutsättningar för arbete. Instrumentet bygger på det redan befintliga bedömningsinstrumentet Assessment of Work Performance (AWP), med tre utvalda arbetsuppgifter och kallas för AWP-FK. Syftet med den här studien var att göra en initial prövning av AWP-FK med fokus på innehållsvaliditet och användbarhet. Som metod användes kvalitativa telefonintervjuer med nio arbetsterapeuter som ingick i Försäkringskassans pilotstudie.

Risk assessment is made to determine risks with contaminated areas and to determine which treatment the area requires. In Sweden, risk assessment is divided into three levels: risk analysis, facilitated risk assessment and detailed risk assessment. In detailed risk assessment site-specific guideline values are developed to compare with values of contaminants that are measured in the area.Site-specific guideline values vary with geological and hydrogeological parameters. The purpose of this report is to examine which of these parameters that affect the guideline values. The examination was done using a calculating program for consideration from the Swedish Environmental Protection Agency from the year of 1997.

This thesis discusses various approaches that venture capitalists have when evaluating investment prospects. The thesis is a case study of the business angel network Firm Factory Network. The empirical material is based on an extensive interview with Firm Factory CEO Daniel Kaplan. Our conclusion is that Firm Factory Network uses both informal and formal methods when they evaluate interesting prospects..

Swedish school children's results have deteriorated in recent years and formative assessment is, in accordance with previous research, a way to develop students' learning and performance. A part of formative assessment is based on feedback that students should receive before, during and after a new assignment. In this study, we want to find out how students and teachers apprehend students' development in relation to feedback and what general attitudes towards feedback can be seen in both parties. The literature and theory discussed is linked to formative assessment, both at international and national level where many important aspects of formative assessment are essential in relation to pupils' further development. The theories are based heavily on human interaction and socio-cultural perspective as a concept.

Purpose - To analyze the relationship between supply chain management maturity, supply chain performance and financial performance in small and medium-sized enterprises (SME:s).Design/methodology/approach - The data comprises 15 SME:s that participated in a local logistic study in Gävleborgs län. The levels of supply chain mature within these firms were based upon an interview study and the financial performance of the firms was then examined using financial reports-based data.Findings -The results of this study indicate that there is a strong relationship between SCM maturity and SC performance in SMEs, some relationships between SCM maturity and financial performance, as well as some relationships between SC performance and financial performance. This means that if firms use maturity indicators in the SCOR areas to improve their processes, they will most likely achieve a positive effect on supply chain performance and probably also on financial performance. The result implies that the supply chain maturities in these firms are higher than expected with no one at the adHoc level.While this study is based on a rather small number of participating firms, it would be valuable to further test the significance of the indicated correlations between SCM maturity and performance in a large-scale survey.Research limitations/Implications - The research is an attempt to understand supply chain maturity and it´s implication on financial performance. Developing supply chain maturity is an opportunity for a company to gain superior performance.

This examination work is about implementation of Cisco Systems Network Admission Control (NAC) within a leading IT-company in region of Jönköping. NAC is a technique that is used for securing the internal network from the inside. NAC can verify that the client who connects to the network has the latest antivirus updates and latest operative system hotfixes. Clients who don?t meet the criteria can be placed in quarantine VLAN where they only have access to the update servers.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

The porpuse of this paper is to find out how three teachers working in years four to six in a Swedish school say they use formative assessment and how they use it in educational practice, and if there is a difference in the use of formative assessment between year four, five and six. Formative assessment is the kind of assessment that aims to enhance the student?s learning, as opposed to summative assessment wich is intended only to summarize student?s accomplishments. To answer the purpose, I conducted qualitative interviews with the teachers, and observations in each of the teachers? classrooms.