Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

In this master thesis outage statistics covering tree years from two distribution grids are analyzed with the purpose to deduce which factors yield outages. The statistics are extensive therefore allowing in-depth analysis of both customer and system related factors. From this starting point and as a model of explanation energy not supplied is studied as the consequence and the measurement of the inconvenience caused by outages. Different methods for calculating energy not supplied are developed and studied and put in comparison to the method used in Network Performance Assessment Model, which is the Swedish frame work for regulating electricity distribution.Analysis of the outage statistics show a relation between the type category of customer and outages that can be deduced to the variance and the density associated with that customer category. Prioritization of different customer categories is elevated also in this aspect.

Home care services have had, and will have a major imortance in the future. More people will be using home care services as a consequence of political strategies but also as an effect of caretakers own wishes. The purpose of this study was to illuminate the factors that are significant for a successful encounter between a caretaker and a caregiver. The study is made as a qualitative analysis of litterature. The data collection was based on Polit and Hungler's model of information retrieval and the data analysis on Graneheim and Lundman's model of analysis.

Home care services have had, and will have a major imortance in the future. More people will be using home care services as a consequence of political strategies but also as an effect of caretakers own wishes. The purpose of this study was to illuminate the factors that are significant for a successful encounter between a caretaker and a caregiver. The study is made as a qualitative analysis of litterature. The data collection was based on Polit and Hungler's model of information retrieval and the data analysis on Graneheim and Lundman's model of analysis.

Entrepreneurial failure is probably a subject that is not well understood. This might have to do with the methodological difficulties of screening out failed entrepreneurs. In this thesis a tool is developed for analyzing supposed entrepreneurial failure. In this model entrepreneurs are surrounded by different stake holders. By using the failure deconstruction model to analyze my own entrepreneurial effort I find that it has neither been a successful project nor a disastrous one.

Abstract ? ?Aggregate complaints in banks MIS?Date:                       June 8th 2012Level:                      Master thesis in Business Administration, 15 ECTSInstitution:                School of Sustainable development of society and technology, Mälardalen UniversityAuthors:                  Abdulla Ahmed Ibrahim         Alexis AnderssonTitle:                       Aggregate complaints in MIS ? A case study of Nordea BankTutor:                      Carl G ThunmanKeywords:               Aggregate, complaint, dissatisfaction, content analysis, Nordea, MIS.Purpose:                  The paper aims to develop a model of how Nordea Bank can monitor customer dissatisfaction through aggregated dissatisfaction analysis. Furthermore, the study aims to identify improvement proposals in Nordea based on the developed model and conducted interviews.Method:                  This thesis consists of qualitative interviews. Personnel at the local office in Västerås has been interviewed as well as Nordea?s customer ombudsmen, former office employee at Nordea, data analyst, head of customer inquiries, Professor of database technology and also a researcher in language technology.

Abstract Title: Veckorevyn.com. A study from power relations in the world of blogs Author: Klara Sigfridsson Department for Media and Cultural Studies, Malmö Högskola Tutor: Kristoffer Gansing This is a report that aims to research upon Fairclough´s Critical discourse analysis to emphasise the power relationship between professional bloggers and former amateur bloggers at the fashion-entertainment web page Veckorevyn.com. Professional bloggers as they appear in the research object and their power within the Media seem to be a subject that is very relevant these days. This paper will look at different factors that make professional bloggers popular and as an example on their responsibility as a role model. However, amateur bloggers do have an importance in this discussion as they are more and more competing with the professionals.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

The main point in this diploma work lies to a beginning on analysis of the existingmodel of WoodEye scanner. The analysis aims to forming a view and understanding ofhow the scanner is designed and how it functions, and certain conditions around thescanner. On the basis of the result from the analysis and obvious criteria, has a numberconcept proposals been put forward. The concept proposals has then been evaluated andbeen compared with current concept, obvious criteria and compared to each other. Thebest proposal has then been developed far to a completed concept..

Background: In previous studies on the subject hope it has been revealed that hope is an important condition for the experience of health, quality of life and well-being. In the literature hope is described as a great support in life that is vital for a person's life and for how the person manages to become afflicted with a fatal disease. Within palliative care the 6S: s is a person-centered model for care that is directed towards the promotion of patient´s participation, relief from suffering and enablement of well-being and support of the patient and his or her family members. Aim: To describe how patients find hope in their situation in palliative care, and to examine whether there is an interaction between the different dimensions of 6 S: s model and with patients' experiences of hope. Methods: This degree project is literature study.

This masters thesis concerns a modeling project performed at Volvo Technology in Gothenburg, Sweden. The main purpose of the project has been to develop a physical model of the climate in construction vehicles that later on can be used in the development of an electronic climate controller. The focus of the work has been on one type of wheel loader and one type of excavator. The temperature inside the compartment has been set equal to the notion climate. With physical theories about air flow and heat transfer in respect, relations between the components in the climate unit and the compartment has been calculated.

In 1999 the Swedish Parliament decided about 15 environmental goals aimed to be achieved in time for the next generation. For example physical social planning must be based on programs and strategies how cultural-historical values has been attended, so called programs of cultural heritage. By law the Swedish municipalities are responsible for reaching these goals by creating program of cultural heritage. But only a few of the municipalities have these programs, meaning that many municipalities need to create programs of cultural heritage in the next five years.The aim of this report is to present a model of analysis on programs of cultural heritage in municipalities for preservation and development of cultural environments. By testing the model on the municipalities of Osby and Tomelilla methods on how to create a new program of cultural heritage or how to complete existing documents are formulated.One of the conclusions is that one document, program of cultural heritage, functions as landscape analysis, model of cultural valuation and strategy of developing cultural values.