My curiosity concerning what pupils read and write during leisure time led me to gather information using a quantative method. The study's aim is to investigate which reading and writing habits they have during their time outside school. A comparison was done of pupils at school year level 3 and level 4 in two different schools with the intention of investigating the influence of social background on reading and writing habits. 137 pupils filled in survey forms and thereafter the MYSTAT statistic program was used to process the information. The results point towards that the pupils read story books both more often and for a longer time than any other type of literature and that they read them often or very seldom.

Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe.

Purpose/Aim: The aim with my study is to reveal changes in the construction of gender in weekly press over time. To do so I study the picture of the woman on front pages of the Swedish magazine Veckorevyn.Material/Method: Qualitative research method, semiotic picture analysis.Main results: There have been a lot of changes in the picture of the woman in Veckorevyn over the years and the results points to a more objectifying picture. The woman has gone from doing something and actually having a role, to simply being there to be looked at, all passive..

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

Purpose/Aim: The aim of this essay is to study the expectations towards the launch of an intranet in a large organisation.Material/Method: A qualitative method has been used to fulfil the purpose of this essay. Indepth interviews have been made with eight informants of dioceses.Main Results: The study shows that the eight informants of dioceses all are positive towards the launch of an intranet in the organisation. They believe that it in time will lead to a more effective intern communication with less channels and more efficient messages..

Retinoscopy, also known as skiascopy, is an objective method for assessing therefraction of the eye. This method has been used for a long time, both in animalsand human patients. According to the literature, it has been postulated that it is notnecessary to obtain cycloplegia before the examination in lower mammals. Someauthors even mention that it can make the examination more difficult. Therefore itis not recommended.

In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

The views on and the knowledge of the introduction of iron to Scandinavia have change by the history of archaeology. The results and discussions are put in the context of time and how that time is reflected in their work and texts. This limits that scholars put up to orientate themselves conceal the complex reality. The limits are changing all the time and is dependent of time and person..

Food-poisoning is a major health problem and an estimated half a million Swedes are food-poisoned annually, with acute gastroenteritis as a consequence. One of the major causes of contaminated foods is related to food- and waterborne viruses. To be able to trace back the source of contaminant, the method of detecting viruses must be specific and sensitive. No standardized method for detecting foods for sapovirus exists today. The aim of the work described in this bachelor thesis is to implement and opti-mize a real-time RT-PCR method for the detection of all genogroups of human sapovirus in foods.

The global Positioning System (GPS) provides location and time information as long as there are unobstructed lines of sight to four or more GPS satellites. However, when this is not the case the signal may be inaccurate or sometimes even completely blocked. In these situations the Inertial Navigation System (INS) is an appropriate choice for positioning.  An INS has already been proposed in a previous thesis by Erik Andersson and the objective of this thesis is to fuse the GPS with the INS in a proper way. A part of this project is to decide the reliability of the GPS.Three methods for GPS reliability detection have been proposed. One method based on the statistical properties of each of the separate systems, and two methods based on the statistical properties of the residuals between the GPS and INS.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

The genus Campylobacter is globally recognised as the leading bacterial cause of human foodborne gastroenteritis. Every year around 8000 Swedes are infected by Campylobacter. Most people are infected by thermotolerant Campylobacter species, commonly C. jejuni and C. coli.

This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.