Background: Today businesses are largely structured in projects and temporary organizations. In many companies, the ability to pursue projects is decisive for the business efficiency and competitiveness. The risk literature do not discuss identification and handling ofproject risk in building- and construction companies to a large extent, which has led us to investigate how project risk can be treated and handled in Swedish building- and construction companies. Purpose: The purpose of this thesis is to cover and describe business risk in Swedish building- and construction projects with focus on different risks and risk tools, and also to modify a model for evaluating the business risk maturity. Realization: This thesis has both traces of a case study and a cross-section study and examines eight different companies that are active in the building- and construction business.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

Evaluation of joint swelling is an important part of the orthopedic examination and can be used to follow a patient?s progress during rehabilitation and therapy. Usually a swelling is assessed by palpating the joint but a more objective, but still easy to use, method would be preferable.This study seeks to increase the knowledge in veterinary rehabilitation by validating four different measurement tools (three recognized and one novel) for the assessment of elbow joint swelling: palpation, tape measure (circumference and figure eight measurement), slide caliper (craniocaudal and mediolateral positioning) and tonometer. This was achieved by calculating the inter- and intra-rater reliability and correlating the results from the different measurements with each other.The methods with best inter- and intra-rater reliability as well as good correlation among themselves were shown to be slide caliper with craniocaudal positioning, circumference and figure eight. Additional studies, with a larger and more diverse material, ought to investigate these methods further..

The purpose of this study is to analyse and compare how religious and non-religious world views are described and represented in three Swedish textbooks. The main question of this study is: How do three textbooks for the first stage of religious studies in high school represent non-religious and religious world views based on the text analysis tools: ethos, modality and transitivity?The three textbooks that are being analysed and compared were produced in the years of 2000, 2002 and 2009. The textbooks are used when teaching the first stage of religious studies in Swedish high school. The text analysis that I´ve chosen to use in this study is a part of Norman Faircloughs critical discourse analysis.

Title: Nu är det dags för fotboll 2.0 I En studie om hur fotbollsklubbar i allsvenskanarbetar med relationsmarknadsföring med hjälp av sociala medier.Short explanation of the titleWe chose the title ?Nu är det dags for fotboll2.0?because it relates to the socialhabits that occurs between individuals within society today. People are moreinteractive online than before due to the development of Web 2,0 and social medias.Main purposeThe main purpose of this thesis is to describe how professional football clubs usesocial media tools to establish, maintain and develop relationships with costumerswithin the field of sports.MethodologyThe thesis is based on a qualitative research with an inductive approach to make itpossible to create a depth within the research. In addition, we have a hermeneuticperspective to build an understanding for the hard labour that is put in action byworkers in the football clubs only for the reasons of making relationships possibleand strengthening bonds by using social media tools. We have gathered theempirical information trough interviews with main leaders within chosenorganizations that use social media tools on an every day basis.

Kronisk smärta är vanligt förekommande bland befolkningen och kan ge stor påverkan på det dagliga livet. Personer med kronisk smärta blir ofta överkänsliga i det centrala nervsystemet (central sensitisering). Läkemedlet capsaicin är potent för att lindra smärta och lugna ett överretat nervsystem. Syfte: Att utvärdera effekten av capsaicinkräm på självskattad smärta och aktivitetsnivå hos patienter med långvarig, benign smärta från rörelseapparaten. Metod: Av 40 tillfrågade personer valde 13 att delta.

This study has researched how user click heatmaps and eye tracking can be utilized in usability testing. We have used the tools SessionCam and Tobii. We designed a website for a small clothing store and conducted usability tests, in order to evaluate the users clicks and eye movements in relation to design choices on the website. The aim of this study was to research how these tools can be integrated in usability testing and how results from the tests can be used to improve usability. We were able to use the recordings of clicks and eye movements and make design changes based on the findings.

Traumatiska skador och kotledsinflammationer kostar hästägare och försäkringsbolag stora summor varje år. För hästägaren innebär dessa skador dessutom förlorad tid för träning och tävling samt stress och oro. Under år 2005 genomfördes en större enkätstudie (ännu ej publicerad) med syfte att identifiera riskfaktorer för uppkomsten av dessa skador. Den innehöll bland annat 10 frågor där hästägare skulle uppslatta hästens temperament. Dessa frågor är utformade som så kallade VAS-skalor (Visual Analogue Scale) och är de som analyserats i detta arbete.

The aim of this study was to investigate patients? experiences of pain during dental hygienist treatment and scaling. The study is based on a questionnaire and includes 129 patients, from four dental clinics in Skåne, Sweden. The questionnaire consisted of ten questions with a Visual Analogue Scale as a main question. Questions about age, gender and dental anxiety were also included.

Due to the increasing international operations for the Swedish Armed Forces these new types of opponents needs new tools to cope with these commitments. A couple of years ago the Swedish Armed Forces had no non-lethal weapons, but today the Swedish soldier has a number of tools to choose from.The purpose of this paper is for the reader to get a presentation of which non-lethal weapons are used today by the Swedish Armed Forces and a sample of what non-lethal weapons are out on the market today. My main question is which non-lethal weapons do the Swedish Armed Forces? miss in their non-lethal capabilities set.I have collected information from a wide selections of sources like reports from the Swedish Defence Research Agency, the Swedish Armed Forces? own regulations and the Internet. The information is then processed and divided into five chapters: The development of non-lethal weapons, description of technologies, non-lethal weapons in the Swedish Armed Forces, Non-lethal weapons on the market and Results.This paper is limited to handheld, portable and man to man non-lethal weapons, all non-lethal weapons in the Swedish Armed Forces or on the international market are not covered.My conclusion is that the Swedish Armed Forces should acquire three 40 mm projectiles, one 12-gauge projectile and one TASER®..

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bebyggelseantikvariskt program15 hpInstitutionen för kulturvårdGöteborgs universitet2014:12.

The domain of this thesis is Personal Information Management (PIM) which is a sub-domain to human-computer interaction (HCI) that specifically concerns the interaction between human and information. The purpose of the study is to make an exploration of information management in a scientific research setting, to study which tools and strategies for information interaction that are used in the context and to suggest possible improvements of today's practices. Three in-depth interviews with scientific researchers have been conducted followed by a qualitative analysis of the results. The results show that there are great variations among the three respondents and that there can be distinguished as much as 15 different dimensions that when put together forms a unique PIM profile for each individual. The recommendation following this is that tools for PIM have to allow a high degree of individualisation.

Poorly maintained forges are a common sight in the province of Gästrikland. Because of their changed appearance, possible move from the origin location and poor items related knowledge they will rarely qualify for the range of funds available through Länsstyrelsen. Therefore this study deals with the problems associated with the forges in southern Gästrikland, i.e. Hedesunda and Österfärnebo parishes.The aim of the study is to increase the items related knowledge of forges and perhaps form the basis for restoration projects in the area. Eleven forges have been examined and the changes they have undergone have been highlighted.A forge was erected on the farm and was used for the households needs such as producing and repairing tools.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

The purpose of this study is to investigate teachers? efforts to teach students with dyslexia in Swedish. The intention with this study is to get the right tools to work with these kinds of students in a more improved and giving way in the future. My questions of issue are:- How can teachers facilitate the learning process for students with dyslexia?- Are pupils with dyslexia included in the teachers? education in the classroom?- How do the other pupils integrate with the dyslexia pupils in the classroom?- How does the teacher manage the situation to teach the whole class at the same time as he/she helps the pupils with dyslexia?- How do you practice when to assess and rate the students with dyslexia?The method used in this paper is a combination of participant observation and interviews with two teachers and their classes.