The purpose of this thesis was to help the company Medius AB with optimization of selected parts in an existing system to minimize the execution time by implementing multithreading. The idea was to manipulate the code so that calculations could be executed at the same time. The main work in this thesis consisted of three optimizations. The first one was to reconstruct a big ?for-loop? so it would execute every loop's work in an own thread. The second optimization also was a reconstruct of a ?for-loop? so it could execute the work in different threads. The third and last optimization consisted of reconstructing a stored procedure on the database, so different parts of it each could be executed in an own thread to create data at the same time. To implement the optimizations Visual Basic .NET and its support for multithreading and connection-pools was used. The result of the optimizations meant that one of the modules could be executed more efficiently and it was 12 % faster. The other modules execution time was more efficient by 25 % faster. The meanings and requirements for this thesis are fulfilled by now letting the system make use of its resources in a better way..

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

This thesis work is performed on VSM Group Ltd in Huskvarna that produces sewing machines under the trademarks Pfaff and Husqvarna Viking. On these sewing machines is an application that helps the user to thread the needle. The aim with the work has been to study today's applications on VSM and their competitors' sewing machines in order to since developing a new Needle-threader that divides itself from all the ones used today. The objective with the work has been an entire new concept with an operational prototype.As a base the competitor analysis was used where today's applications was studied in order to identify positive and negative aspects of these. This led to a number off ?concept families? where different variants off the same ideas were collected and evaluated.

Visas inte innan 30 juni 2015.

Today's society is facing major challenges. In order to reduce the climate impact fossil fuels should be replaced with fuels that do not contribute to the greenhouse effect. The growing population generates organic waste originating from industry and households so called organic fraction of municipal solid waste (OFMSW). Through anaerobic digestion, waste can be utilized to produce energy-rich methane gas. In this way, waste can be a resource instead of a burden on society.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.

The aim of this study was to establish knowledge about the most suitable substrate for cultivating different kinds of anaerobic beer spoilage bacteria in the brewing industry. During the study, two other aspects were investigated; if the sample volume affects the results and which anaerobic beer spoilage bacteria are present in the micro flora at the brewery. The method used was standard cultivation with four different substrates; Universal Beer Agar, Nachweismedium Bierschädliche Bakterien, Raka Ray and VLB S7-S. During the identification of bacteria in the micro flora, a method using PCR was used. None of the substrates showed a significant advantage over the others.

Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

This study was performed at Thomas Arena in Strängnäs, Sweden. The reason ofthe study was to see how to perform an enhancement in the orientatabilitybetween the entrance and the locker rooms. By looking at how the environmentinteract with the users when it comes to orientatability, the study should give agreater understanding in how the entrance should be evolved to enhance theorientatability. A qualitative study was performed, where observations andinterviews studies was used to collect the data. By the result you could see that theenvironment between the entrance en the looker rooms was hard to understand,and was affecting the users in their orientation.

Swedish biogas is currently produced mainly by anaerobic digestion of sewage sludgeat sewage treatment plants, landfills and anaerobic digestion of household or industrialwaste. Also cattle ma-nure from farms can be used to produce biogas. Upgradingbiogas represents an increase in methane concentration from about 65 % to about 97%. In addition, particles and contaminants must be sepa-rated from the upgradedbiogas. There are various methods for upgrading and this report compares sixdifferent methods with respect to environment and economy: water scrubber,Biosling, cryo technology, chemical absorption, Pressure Swing Adsorption (PSA) andmembrane separation.According to the used ORWARE model, chemical adsorption with amine has the leastenvironmen-tal impact (methane emissions) and the lowest costs.

Have you ever had problems sorting your cables, are the winders you use too big and crude then the EC-winder is the product for you. The EC-winder concept is a compact and intelligent winder for home application. Its simple design and subtle looks enables it to blend in with the surrounding environment. Its function is designed so that it with ease can be handled by any one after only a couple of instructions. You simply thread the cable trough the opening on the winder and then you rotate the upper part until the cable reaches the desired length. After use the winder can be opened to enable easy extraction of the cable..

Biogas is a renewable fuel that can be extracted from anaerobic digestion of many differentsubstrates, for example biological household waste. An alternative handling of the waste is tomix it with other wastes and incinerate it in a combined heat and power (CHP) plant. Thisstudy uses life cycle assessment to investigate which type of waste handling that is betterfrom an environmental point of view, anaerobic digestion with biogas production orincineration. The results are based on a case study of a biogas production plant owned by thecompany Ragn-Sells in Vänersborg. The alternative is incineration at a CHP plant inGothenburg.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

The continuous process of urbanization results in demands on research and development for ecological and sustainable city development. Because of this, the current systems for wastewater treatment may have to be improved. In order to evaluate new technologies for municipal wastewater treatment, a development project has been initiated for the new district Hammarby Sjöstad in Stockholm. The project is lead by the company Stockholm Water. High environmental standards have been put up for the district, as it must be twice as good as an ordinary new district.